⭐⭐⭐⭐If you liked the video and want to show your support, you can use any of these links to purchase ANY ITEM you normally would off of Amazon and we get a small commission with no extra cost to you! Make sure to complete orders through the links! Here's some tools to get started! Thank You! DEWALT 20V Max Impact Driver Kit, 1/4-in: amzn.to/3y0vDRJ 5 Pieces Magnetic Telescoping Pick-up Tool Kit: amzn.to/3knxckI Magnetic Screwdrivers Set with Case, Amartisan 42-piece: amzn.to/39sTSxT CRAFTSMAN Mechanics Tools Kit with 3 Drawer Box, 216-Piece: amzn.to/3Nux6UL ANCEL V6 PRO Bidirectional Scan Tool: amzn.to/3wRcvDy CASOMAN Master Torx Bit Socket and External Torx Socket Set, 60-Piece Set: amzn.to/3NbWUpe Thorstone No Spill Coolant Funnel Kit: amzn.to/3m1dADS
i asked you if you could take the flaps out and you said
You cannot do it that way it will always be in limp mode,and i see you have taken them out,great one i knew there was a way to delete them, why did you just say so,you just did it and its not in limp mode,you by passed the flaps,
I don’t think you can have one without the other ,history tells us that for sure. but I don’t think I should call myself a genius, I know I have in the past. Only at the moment I think that I am, which unfortunately is not as often as I would like it to be. I’m definitely crazy…. I think some of the things I do is ingenious but they get overshadowed by my incompetence. 🤷🏻♂️
Well I think some of us definitely want to be a little bit humble there are certain things that I’ve done in my life that I am very proud of but if it wasn’t for You Tube I would’ve never done them because I would’ve never had the time to do them this particular video I feel was one of them accomplishments that to some might not be that big a deal but I thought about this for a number of years and the solution was really simple I should’ve figured it out much sooner. Some of the other things that I’ve done took a lot of time for what they accomplish and deserved the amount of time that it took me to figure them out this personally to me was probably not one of them even though I’m very proud of it
@@sharpcarco if the knowledge you have is self taught, and you pass it on to someone (like me) that doesn't know, then the bragging is well deserved lol keep it up mate! Respect from the UK
Swirl flaps are open after a certain RPM, I never heard of someone clogging their DPF because of them being deleted, even without a tune for it. If the engine is mechanically fine, you're creating marginally more soot at lower rpm. I have a friend with a Sprinter that deleted his flaps with the resistor dongle 250k km ago. Engine still purrs, 580k km total so far, original DPF, never cleaned.
Thank you so much Dave I was definitely patting myself on the back because I wanted to do this for several years. I wished I would’ve had this idea five years ago though would’ve been more helpful back then. Still pretty cool nonetheless
Thanks Tommy I do a lot of neat stuff with Sprinter’s there the biggest pain in the ass but one of my favorite vehicles to work on because they are a pain in the ass. I very much like challenges so thank you for the consideration.
Hi Clay, I have a 2008 OM642 and everything is working fine, have you ever heard of the air needle mod for swirl flap preventative maintenance? where you puncture a basketball inflator needle through the hose on the suction side of the turbo, thena thin fuel line into the cab with a bottle of seafoam or diesel? and while cruising highway speeds you give a few squirts every once in a while? apparently if breaks down carbon over time and cleans the swirl flaps to like new condition, or so people have said. Have you heard of this?
Hello clay from the uk 🇬🇧 I am Woking on the same job there as we are right hand drive so on the driverside intake the last flap toward the dashboard of the van is blocked at the pin which is not allowing the rest of mechanisms to work proper now my questions the why you have done this flap delete this way you are keeping the boost motor or flap motor still working and the rest of the system is working correctly as it should where actually the air is passing through freely in the intakes correct?? Any suggestion of what I can do to it my customer wants the job done once so that I can be sure never done one before hince not sure what to do with it let me know I will really appreciate your help and time..
Well, I would say ship them over here and I will do them but that’s probably not time for that regretfully. I’m not interested in sharing my secret, so I’m sorry to say RUclips videos don’t really pay very much like 2/10 of a cent per view… and I got a family to raise if I let my secrets out that I spent years figuring out well. I wouldn’t be able to keep food on my table. Please don’t take it the wrong way I would love to tell people but it’s gotta stay a secret. Sorry. If you got any more questions, though, you can reach out to me on clays, a/c and Auto Repair over Facebook, I’ll answer a lot quicker. I’ll try to help you and answer whatever questions I can except for giving you my secret sauce. ..
This video is your solution, also I suggest you service your injectors and replace your oil cooler seals, as that is another engine problem and the same parts must be removed, so you do all the work once
With this Delete would the effect of engine breaking also go away. I understand that engine breaking effect or Compression breaking as some call it is caused by flaps closing when not accelerating.
I'm not sure how to react to this video. I was hoping to learn something but all that I learned is that you can clean the manifolds some how. There is a video posted by a chemist who shows you the results of using different cleaners and the affect they have of carbon deposits. As far as deleting the swirl flaps (butterfly valves) I've noticed that there is a variety of opinions on how to and why not to. Anyway Mr. Clay-way thanks for your efforts keep up the good fight, but this is just not for me.
Interesting comment. I suppose I could show people how to do it. but then I would lose my house. I have 990 videos that show people step-by-step how to do several different things. This is one of the few things out of about four things that I can make money off of on my RUclips channel and you’re not necessarily paying for the cleaning and the deleting, you’re paying for my experience and if you think my experience stops with these intakes, you should probably check out my other videos…. I figure my phone number and my abilities to do something are probably far more valuable than any service I ever offer because I always answer questions. I don’t answer questions about things that I make money off of unless somebody has paid me. I know everybody comes to RUclips for things that are free but not everything should be free unless you already have enough money to give things away for free and I give tens of thousands of dollars if not hundreds of thousands of dollars every year, I’m fairly certain that I’ve given away more money than MrBeast….. and not only did I give you the fishing pole to fish to feed your family I taught you how to fish….
Will this still pass emissions? Can you register it in every state? I had mine deleted a year ago now my DPF is clogged. Not sure if it was form this or was already clogging. has 224k miles.
Yes. According to past experience. Well, if it’s been deleted, it’s not gonna ever pass emissions no matter what you do to it unless you bring it back to factory so I kind of retract that it will it will if you only delete the Intakes, it will pass emissions but if you delete the Intakes and gut out the exhaust, it will never pass
I like your videos thanks for sharping your acknowledgment, I have that same issue with my 07 sprinter I bypass the swirl motor nothing happens still limp mode I disconnected the EGR that’s was worked for couple weeks and then limp mode again now it’s seem nothing to do expect if I can try to clean those intake might be works any suggestions let me know , again thanks hope to heard you back soon
Well I can tell you that I tried to clean them about half a dozen times and then when I put them back in it went back in limp mode two weeks later….. I strongly recommend against you trying to clean them unless you want to do this job twice let me know after you take them out if you want to do it twice…… (PS you will have absolutely no desire to do this once again unless that’s what you do for a living like me) So like I said in the video I would recommend you send them to me but you don’t have to I don’t need the extra work I’m just letting you know my experiences it took me a long time to figure out how to clean these things and not have them lock back up
ok so on a 2008 dodge sprinter i removed the swirl flaps and put a diode in the plug and i still get a check engine light. with the check engine light on its in limp mode and barely gets outta its own way. i would assume the swirl valve position sensor is going to tell the computer there not moving and set a fault code.
Hello Clay! I have a 2008 Jeep Grand Cherokee. With OM642 . I need to clean and maybe delete the butterfly valves in the intake manifolds. Can I contact you?
I’m sorry the EPA has a much greater reach than the Clay Way….. Hell I would delete them all I think it’s a bunch of bullshit why would you ever think it makes more sense to take a vehicle that could get 50 miles to the gallon and make it only get 18 so you have to produce almost 3 times more fuel…….. Oh wait they make more money and get more taxes doing that sorry I guess I should’ve thought about it that way
What up? I answered your question the other day by the way on Facebook. Reach out to me on there and I’ll give you my shipping information when you’re ready.
😂😂😂😂😂😂 wish I would’ve thought of that when I was making that video but there’s still more to go definitely “using that one” I can see it now” no I’m not talking about Shirley with her swirl flaps down there at the local dive” I’m never going to forget that that’s hilarious
you can share your secret here that does not mean that people will do it, You have all the tools and knowledge to do that. People will send you the things anyway. how much would you charge for that?
Do you go to work to make money or would you just send me yours? I mean I’ll take your paycheck if you want. This is how I make a living how I keep food on my table. I have a Thousand videos and five of them I make money off of. So I’m sorry this one wasn’t helpful for you but if you want one of these vans, I guarantee you one of my videos will be helpful, but I would appreciate you just go watch that other jack ass.
⭐⭐⭐⭐If you liked the video and want to show your support, you can use any of these links to purchase ANY ITEM you normally would off of Amazon and we get a small commission with no extra cost to you! Make sure to complete orders through the links! Here's some tools to get started! Thank You!
DEWALT 20V Max Impact Driver Kit, 1/4-in: amzn.to/3y0vDRJ
5 Pieces Magnetic Telescoping Pick-up Tool Kit: amzn.to/3knxckI
Magnetic Screwdrivers Set with Case, Amartisan 42-piece: amzn.to/39sTSxT
CRAFTSMAN Mechanics Tools Kit with 3 Drawer Box, 216-Piece: amzn.to/3Nux6UL
ANCEL V6 PRO Bidirectional Scan Tool: amzn.to/3wRcvDy
CASOMAN Master Torx Bit Socket and External Torx Socket Set, 60-Piece Set: amzn.to/3NbWUpe
Thorstone No Spill Coolant Funnel Kit: amzn.to/3m1dADS
My first time seeing your videos and absolutely loved your humor :) keep up the good work !!!
i asked you if you could take the flaps out and you said
You cannot do it that way it will always be in limp mode,and i see you have taken them out,great one i knew there was a way to delete them, why did you just say so,you just did it and its not in limp mode,you by passed the flaps,
Because you said, can I just delete the flaps all together and I said no because you cannot do that it will not work. It will go into limp mode.
There's a thin line between genius and crazy mate. You in between both pmsl
I don’t think you can have one without the other ,history tells us that for sure. but I don’t think I should call myself a genius, I know I have in the past. Only at the moment I think that I am, which unfortunately is not as often as I would like it to be. I’m definitely crazy…. I think some of the things I do is ingenious but they get overshadowed by my incompetence. 🤷🏻♂️
@@sharpcarco if you do genius work, I don't think its bad to acknowledge it mate.
Well I think some of us definitely want to be a little bit humble there are certain things that I’ve done in my life that I am very proud of but if it wasn’t for You Tube I would’ve never done them because I would’ve never had the time to do them this particular video I feel was one of them accomplishments that to some might not be that big a deal but I thought about this for a number of years and the solution was really simple I should’ve figured it out much sooner.
Some of the other things that I’ve done took a lot of time for what they accomplish and deserved the amount of time that it took me to figure them out this personally to me was probably not one of them even though I’m very proud of it
@@sharpcarco if the knowledge you have is self taught, and you pass it on to someone (like me) that doesn't know, then the bragging is well deserved lol keep it up mate! Respect from the UK
Send a couple of om642 de-coked manifolds to the Uk for my S class please, you do a great job😁👍👌
LUV YOUR HUMILITY BRO YOUR BAD ASS !!!!!💪🤙🎶☠️😎PIRATE IN THE PNW !!!
Swirl flaps are open after a certain RPM, I never heard of someone clogging their DPF because of them being deleted, even without a tune for it. If the engine is mechanically fine, you're creating marginally more soot at lower rpm. I have a friend with a Sprinter that deleted his flaps with the resistor dongle 250k km ago. Engine still purrs, 580k km total so far, original DPF, never cleaned.
Nicely done brother 👍😁
Thank you so much Dave I was definitely patting myself on the back because I wanted to do this for several years. I wished I would’ve had this idea five years ago though would’ve been more helpful back then. Still pretty cool nonetheless
How much would the delete on those be? Maybe a few other things if you do those too?
Great video.
If I ever need a work on my sprinter rv, I know where to go.
Thanks
Thanks Tommy I do a lot of neat stuff with Sprinter’s there the biggest pain in the ass but one of my favorite vehicles to work on because they are a pain in the ass. I very much like challenges so thank you for the consideration.
Hi Clay, I have a 2008 OM642 and everything is working fine, have you ever heard of the air needle mod for swirl flap preventative maintenance? where you puncture a basketball inflator needle through the hose on the suction side of the turbo, thena thin fuel line into the cab with a bottle of seafoam or diesel? and while cruising highway speeds you give a few squirts every once in a while? apparently if breaks down carbon over time and cleans the swirl flaps to like new condition, or so people have said. Have you heard of this?
Hello clay from the uk 🇬🇧 I am Woking on the same job there as we are right hand drive so on the driverside intake the last flap toward the dashboard of the van is blocked at the pin which is not allowing the rest of mechanisms to work proper now my questions
the why you have done this flap delete this way you are keeping the boost motor or flap motor still working and the rest of the system is working correctly as it should where actually the air is passing through freely in the intakes correct??
Any suggestion of what I can do to it my customer wants the job done once so that I can be sure never done one before hince not sure what to do with it let me know I will really appreciate your help and time..
Well, I would say ship them over here and I will do them but that’s probably not time for that regretfully. I’m not interested in sharing my secret, so I’m sorry to say RUclips videos don’t really pay very much like 2/10 of a cent per view… and I got a family to raise if I let my secrets out that I spent years figuring out well. I wouldn’t be able to keep food on my table. Please don’t take it the wrong way I would love to tell people but it’s gotta stay a secret. Sorry.
If you got any more questions, though, you can reach out to me on clays, a/c and Auto Repair over Facebook, I’ll answer a lot quicker. I’ll try to help you and answer whatever questions I can except for giving you my secret sauce. ..
I have questions if you can delete egr def dpf on 2021 3liter sprinter
Thanks for the video, I have MB 320 CDI codes for under and overboost. No power on hwy takes off up to 2500-3000 and nothing more. Any suggestions?
This video is your solution, also I suggest you service your injectors and replace your oil cooler seals, as that is another engine problem and the same parts must be removed, so you do all the work once
And the inlet turbo seals
With this Delete would the effect of engine breaking also go away. I understand that engine breaking effect or Compression breaking as some call it is caused by flaps closing when not accelerating.
No, there’s probably a leak in your PCV
I'm not sure how to react to this video. I was hoping to learn something but all that I learned is that you can clean the manifolds some how. There is a video posted by a chemist who shows you the results of using different cleaners and the affect they have of carbon deposits. As far as deleting the swirl flaps (butterfly valves) I've noticed that there is a variety of opinions on how to and why not to. Anyway Mr. Clay-way thanks for your efforts keep up the good fight, but this is just not for me.
Interesting comment. I suppose I could show people how to do it. but then I would lose my house. I have 990 videos that show people step-by-step how to do several different things. This is one of the few things out of about four things that I can make money off of on my RUclips channel and you’re not necessarily paying for the cleaning and the deleting, you’re paying for my experience and if you think my experience stops with these intakes, you should probably check out my other videos…. I figure my phone number and my abilities to do something are probably far more valuable than any service I ever offer because I always answer questions. I don’t answer questions about things that I make money off of unless somebody has paid me.
I know everybody comes to RUclips for things that are free but not everything should be free unless you already have enough money to give things away for free and I give tens of thousands of dollars if not hundreds of thousands of dollars every year, I’m fairly certain that I’ve given away more money than MrBeast….. and not only did I give you the fishing pole to fish to feed your family I taught you how to fish….
Will this still pass emissions? Can you register it in every state? I had mine deleted a year ago now my DPF is clogged. Not sure if it was form this or was already clogging. has 224k miles.
Yes. According to past experience.
Well, if it’s been deleted, it’s not gonna ever pass emissions no matter what you do to it unless you bring it back to factory so I kind of retract that it will it will if you only delete the Intakes, it will pass emissions but if you delete the Intakes and gut out the exhaust, it will never pass
so I''m back 8 months later to re-think The Clay Way. I'm going to think about this.
Well, you know how to get a hold of me
I like your videos thanks for sharping your acknowledgment, I have that same issue with my 07 sprinter I bypass the swirl motor nothing happens still limp mode I disconnected the EGR that’s was worked for couple weeks and then limp mode again now it’s seem nothing to do expect if I can try to clean those intake might be works any suggestions let me know , again thanks hope to heard you back soon
Well I can tell you that I tried to clean them about half a dozen times and then when I put them back in it went back in limp mode two weeks later….. I strongly recommend against you trying to clean them unless you want to do this job twice let me know after you take them out if you want to do it twice…… (PS you will have absolutely no desire to do this once again unless that’s what you do for a living like me)
So like I said in the video I would recommend you send them to me but you don’t have to I don’t need the extra work I’m just letting you know my experiences it took me a long time to figure out how to clean these things and not have them lock back up
ok so on a 2008 dodge sprinter i removed the swirl flaps and put a diode in the plug and i still get a check engine light. with the check engine light on its in limp mode and barely gets outta its own way. i would assume the swirl valve position sensor is going to tell the computer there not moving and set a fault code.
Well, of course you did…. Because you didn’t send them to me. Now I can’t help you you need new intakes.
Hello Clay! I have a 2008 Jeep Grand Cherokee. With OM642 . I need to clean and maybe delete the butterfly valves in the intake manifolds. Can I contact you?
Absolutely Peter it’s easiest to reach out to me on Facebook
Clays AC and auto repair , send me a DM
Or you can email me at thenewclayway@gmail.com
Thanks
Hi brother, I have a 2007 sprinter and I have code p2526 and p2978 and it’s drives but it won’t go fast (limp mode) any suggestions? Thanks
Yeah, either rebuild or replace your intakes
Hey Clay
I would like to send you my intakes for my 3.0 liter and have them cleaned as well as remove the swirl motor and flaps. Please advise.
I need this done to my van but I'm in Georgia
People bring them to me from all over the country, so Georgia is not that far away
@sharpcarco are you doing the newer 3.0's too? I have a 2019
@@johnanthony8951 of course
Will you do a EGR delete anytime soon? Thanks
Probably never on a video. Sorry it’s against the law to delete emission related systems, this is a torque system.
@@sharpcarco Thanks for the reply. I live in a state that doesn’t care about emissions or inspections 😂. Land of the free 😝
I’m sorry the EPA has a much greater reach than the Clay Way….. Hell I would delete them all I think it’s a bunch of bullshit why would you ever think it makes more sense to take a vehicle that could get 50 miles to the gallon and make it only get 18 so you have to produce almost 3 times more fuel…….. Oh wait they make more money and get more taxes doing that sorry I guess I should’ve thought about it that way
Does this work on 2008 jeep diesel
Yeah, but it will plug up the exhaust after a period of time.
How do I send you parts
You have to look me up on clays ac and Auto Repair on Facebook and send me a DM
AHOY Young man I'm going to pull the intake and oil pump/Filter to send U can U send me More info thanks Eric
What up? I answered your question the other day by the way on Facebook. Reach out to me on there and I’ll give you my shipping information when you’re ready.
Great video! I have a 2008 ML320CDI and I wonder if you can have them done for me and what would be the best way to contact you if so?
Thanks!
You can send me a message through Clays ac and Auto Repair on Facebook just send me a DM
“Swirl flaps” sounds like a stripper name…
😂😂😂😂😂😂 wish I would’ve thought of that when I was making that video but there’s still more to go definitely “using that one”
I can see it now” no I’m not talking about Shirley with her swirl flaps down there at the local dive”
I’m never going to forget that that’s hilarious
@@sharpcarco I’m just glad to be helpful… LOL
you can share your secret here that does not mean that people will do it, You have all the tools and knowledge to do that. People will send you the things anyway.
how much would you charge for that?
What up brother did you get your Engine fixed? You already know how much they cost…..
TLDR all of your videos: I found out how to do something but I’m not showing you how!
Do you go to work to make money or would you just send me yours? I mean I’ll take your paycheck if you want. This is how I make a living how I keep food on my table. I have a Thousand videos and five of them I make money off of. So I’m sorry this one wasn’t helpful for you but if you want one of these vans, I guarantee you one of my videos will be helpful, but I would appreciate you just go watch that other jack ass.
This face triggers me