Am I right? According to your video, you connected your Solar cable to the main power connector. I figured that's how it might be but didn't want to do that until it was confirmed that is the right way. I couldn't find anything with that same specific control box. The Solar panel is from the previous Mighty Mule gate we had.
@@Miguel_A_S yes that’s correct. Check out my video on installing the gate, around the 12 min mark it talks about hooking up the solar panel. Thanks for the comment and watching the video. ruclips.net/video/uJlmCxdDec4/видео.htmlsi=cenH1eHMcsSDXSFK
Thanks for the video. It would have been nice if you actually specified where the wires went once you figured it out. You kind of just passed over that unless I missed something. Watched it a few times Red. 12v pos My braided is green assuming ground. Green/braided and yellow to 12v neg Black to com Blue to exit Is this correct??? Thanks again
@@mattlacombe3912 thank you. It works a couple times but then doesn't. I'm thinking i had a vehicle too close when it first initiates and I think it goes through a calibration. I'm gonna power it down and back up and make sure nothing is near the wand. Thanks for confirming. Appreciate it and the video
Our car activates it easily, our truck you have to drive slow and closer to the sensor. Usually that works but sometimes you have back up and try it again.
@@mattlacombe3912 thanks. I thought i was going crazy. Every delivery truck all cars all will trip it. My truck wont trip it only in the morning. When its dark. No matter how slow I drive in the light it works. Weird. It does have chrome step rails if thatakes a difference. Really weird. Ill try extra slow tomorrow
Hey @mattlacombe3912 could you tell me a cable I could get like that to run power. I want one if possible that I could run into a wall and not the electrical power box! But IDK about anything electrical as much.
Please someone who can help me, I had to buy a replacement card for my gate opener MM 272 but they are already discontinued, I called customer service and they told me that the MM562 card would work, I bought it and sent it to Colombia and the technician told me that the number of cables is different to adapt it, someone please help me install the correct cables,
Am I right? According to your video, you connected your Solar cable to the main power connector. I figured that's how it might be but didn't want to do that until it was confirmed that is the right way. I couldn't find anything with that same specific control box. The Solar panel is from the previous Mighty Mule gate we had.
@@Miguel_A_S yes that’s correct. Check out my video on installing the gate, around the 12 min mark it talks about hooking up the solar panel. Thanks for the comment and watching the video.
ruclips.net/video/uJlmCxdDec4/видео.htmlsi=cenH1eHMcsSDXSFK
Thanks for the video. It would have been nice if you actually specified where the wires went once you figured it out. You kind of just passed over that unless I missed something. Watched it a few times
Red. 12v pos
My braided is green assuming ground.
Green/braided and yellow to 12v neg
Black to com
Blue to exit
Is this correct???
Thanks again
I’ll have to go look at the control box and get back to you soon. Thanks for watching the video.
Yes, that correct as far as I can tell.
@@mattlacombe3912 thank you. It works a couple times but then doesn't. I'm thinking i had a vehicle too close when it first initiates and I think it goes through a calibration. I'm gonna power it down and back up and make sure nothing is near the wand. Thanks for confirming. Appreciate it and the video
Our car activates it easily, our truck you have to drive slow and closer to the sensor. Usually that works but sometimes you have back up and try it again.
@@mattlacombe3912 thanks. I thought i was going crazy. Every delivery truck all cars all will trip it. My truck wont trip it only in the morning. When its dark. No matter how slow I drive in the light it works. Weird. It does have chrome step rails if thatakes a difference. Really weird. Ill try extra slow tomorrow
Oh by the way. Mine came with a range adjustment board. Did you not need to install that or did your wand not come with one
Mine did not come with that.
Hey @mattlacombe3912 could you tell me a cable I could get like that to run power. I want one if possible that I could run into a wall and not the electrical power box! But IDK about anything electrical as much.
Sorry, I can’t help you with this. My gate is a 371. Good luck.
Link to the wireless sensor ruclips.net/video/pACgNnUUNVg/видео.html
Please someone who can help me, I had to buy a replacement card for my gate opener MM 272 but they are already discontinued, I called customer service and they told me that the MM562 card would work, I bought it and sent it to Colombia and the technician told me that the number of cables is different to adapt it, someone please help me install the correct cables,