To be honest with you the explanation is great and attractive one , but plz can you prepare another video in which you explain the work of central production facilities . I’m sure that soo many people need an overview about the work of this centre . Thanks in advance .
Very informative! I work for a very large company that has been building production tanks at our location for years and we have begun building separators and pressure vessels. Nice to know how these work outside of production. I do the ASME paperwork which is much more extensive than API.
I want to break the stable nanoemulsion to obtain the oil for measuring. But I can not do it. Can you suggest me the useful way to break it.. Please help me
The separation of oil and natural gas is not excessively complicated, but to make it profitable, large volumes of resources are needed. Processing oil into different components (gasoline, lubricants, etc.) is complex and needs expensive equipment. Both of these processes are not economical or safe to perform at home.
Can i ask u a Question is that related to petroleum Engineering or mechanical Engineering .. i mean I've seen A lot of yours content but i think its mainly about piping and vessels..
I am working in chemical industry....we have storage tanks , those containg mixture of liquids.(organic and inorganic ).how can we separate both layers..and how to measure levels of both layers in closed tank ?
I can’t say how to best separate the materials you are working with as I’m unfamiliar with them but a good way of measuring the liquid levels would be to use a interface sonar level sensor.
Yes, both the maintained liquid level and the burner tube size/placement are important to maintain proper heat transfer. Contaminants in the liquids can cause scaling and/or build up on the fire tube which can lead to premature failures. Regular inspection and maintenance of the burner assembly will help prevent failures.
Can you advise the type of chemical which can be used for hot wash or circulation to clean Crude Oil Storage Tank. I am not sure on the type of chemical to be used. Also, same as the chemical to be diluted in water during hydrojetting for degreasing. Thanks in advance
This may be difficult to explain in a comment here, so if you have other questions, feel free to ask and we will try to help. An electrostatic treater uses electricity to remove dispersed water droplets from oil. The oil is subjected to an electrical field which facilitates better oil-water separation by causing the dispersed water droplets to coalesce and fall to the bottom of the vessel. The electric field also distorts and thus weakens the film of the emulsion surrounding the water droplets. Water droplets dispersed in oil that are subjected to an alternating-current (AC) field become elongated as voltage rises during the first half-cycle. As the droplets are relaxed during the low-voltage part of the cycle, the surface tension pulls them back toward a spherical shape. This effect repeats at a very rapid pace with each cycle, weakening the film so that it breaks more easily when the water droplets collide with one another.
Hi! I am in the process of building a small (4500m3 a year) sludge-water treatment plant. I'm removing heavy metals with coagulants and floculants, ending the process with a bio-reactor. BUT: I have a problem with splitting very oil-poluted water. I need to something to clear the phases. (First step is sedimentation, but I have some process-water that won't clear the oil) Would love some help. Don't mind paying for it. Thanks!
Hi Bro, I have experience in produced water and sludge oil treatment. You have to separate the sludge first to make easy oil in water emulsion separation in down stream. Due to rhe sludge has natural emulsifier those thighten the emulsion. After that you may treat the oily water with floc or coagulant chemicals. Thanks
Hello, unfortunately, we're not able to help much regarding your question. Our immediate staff available was not entirely sure how or when h2SO4 comes into play in our industry. The removal of Hydrogen Sulfite (H2S) from gas is prominent, but not so certain about Sulfuric Acid. If you need more help, feel free to call or email customer support.
I'm very sorry but there's something that confused me about how the density increase with heat while in fact the oil density must be decreased while we increase temp.
Ha! The makeup of the well fluid and the conditions you expose them to will determine the speed at which it separates. The jar of oil & water shown in the video is from a well in Oklahoma and was only separating by specific gravity differentials and retention time.
السلام عليكم اخي اسامة عم قطر الزيت بعد مابيخرج من خزان التقطير يخرج اللون اصفر بعد ساعة يقلب اللون اسود وبعد ايام يرجع اللون بني وفيه ترسيبات سوداء بقاع الاناء اذا تقدر تساعدني بحل المشكلة مشكور
You can reach Product Applications and Technical Support: (405) 525-4264 or prodtechsupport@kimray.com Or for international, please find your region on this page to contact support: kimray.com/international
To be honest with you the explanation is great and attractive one , but plz can you prepare another video in which you explain the work of central production facilities . I’m sure that soo many people need an overview about the work of this centre . Thanks in advance .
very informative, nice explanation 🙂 thanks
Very informative! I work for a very large company that has been building production tanks at our location for years and we have begun building separators and pressure vessels. Nice to know how these work outside of production. I do the ASME paperwork which is much more extensive than API.
Well explained - what is the standard value (ppm) of water In oil and oil in water.
Thanks
The standard BS&W (basic sediment & water) levels in oil are typically no more than 1%".
Very nice explaned. Useful, Thanks
EXCELLENT VIDEO!!!
simple and helpful. Thank you.
Glad it was helpful!
Thank you so much 😊
Great video Thank you
I want to break the stable nanoemulsion to obtain the oil for measuring. But I can not do it. Can you suggest me the useful way to break it.. Please help me
Thanks for such good explanation
So glad we could be helpful! Thank you!
How does foam forms into production separators, and causes upsets on the process???
Excellent video!
Thank you very much! Glad you found it helpful!
How can we seperate moisture from silicon oil CST grade
Does these separation techniques work even to separate Gases bubble from liquids ?
Is separating oil from gasoline something that can be done at home or is the process too complex or involves expensive equipment?
The separation of oil and natural gas is not excessively complicated, but to make it profitable, large volumes of resources are needed. Processing oil into different components (gasoline, lubricants, etc.) is complex and needs expensive equipment. Both of these processes are not economical or safe to perform at home.
1:07 this is a mistake on the chart by heating the density decreases !
Si, también quedé detenido en esa lámina. Tal vez se refiere a la diferencia de densidad. Pero como sea hay que corregir o aclarar.
Density difference increased
Can i ask u a Question is that related to petroleum Engineering or mechanical Engineering .. i mean I've seen A lot of yours content but i think its mainly about piping and vessels..
how can i make a demulsifier
questions in gas processing at stabiliser for condensate whats good time for separation , pressure is 13bar?
What about the emulsion in MULTI-PHASE FLOW METER?
Very nice!
thanks
I am working in chemical industry....we have storage tanks , those containg mixture of liquids.(organic and inorganic ).how can we separate both layers..and how to measure levels of both layers in closed tank ?
I can’t say how to best separate the materials you are working with as I’m unfamiliar with them but a good way of measuring the liquid levels would be to use a interface sonar level sensor.
Sounds like a consultant...
does water level and burner tube level matter? do you worry about scaling with the water over the burner tubes?
Yes, both the maintained liquid level and the burner tube size/placement are important to maintain proper heat transfer. Contaminants in the liquids can cause scaling and/or build up on the fire tube which can lead to premature failures. Regular inspection and maintenance of the burner assembly will help prevent failures.
Nice explanation
Can you advise the type of chemical which can be used for hot wash or circulation to clean Crude Oil Storage Tank. I am not sure on the type of chemical to be used. Also, same as the chemical to be diluted in water during hydrojetting for degreasing. Thanks in advance
6 Ways to Separate an Oil and Water Emulsion [Oil & Gas Industry Basics]
I need to separate oil and reuse water from an emulsion having 20% oil by volume. Pl suggest
Any idea if the same principle can be used for fat oil and grease fog receival facilities?
I’m not familiar with that process, but the principals of specific gravity, heat and retention time could probably be used.
Nice video
Thanks
Thank you too!
Can you explain Vessel internal electrostatic coalescor system??
This may be difficult to explain in a comment here, so if you have other questions, feel free to ask and we will try to help.
An electrostatic treater uses electricity to remove dispersed water droplets from oil. The oil is subjected to an electrical field which facilitates better oil-water separation by causing the dispersed water droplets to coalesce and fall to the bottom of the vessel.
The electric field also distorts and thus weakens the film of the emulsion surrounding the water droplets. Water droplets dispersed in oil that are subjected to an alternating-current (AC) field become elongated as voltage rises during the first half-cycle.
As the droplets are relaxed during the low-voltage part of the cycle, the surface tension pulls them back toward a spherical shape. This effect repeats at a very rapid pace with each cycle, weakening the film so that it breaks more easily when the water droplets collide with one another.
I assume water and oil is seperated from olives in a similar way ?
How to separate sludge From sludge tank
Nice one
I GOT NEW JOB AS A WELLTESTER. I WANT TO KNOW THE SAMPLE TAKING METHOD. PLEASE IF YOU HAVE THE INFORMATION ABOT BS&W TESTING, PLEASE LET ME KNOW
You have your hearing protection on.
Hi!
I am in the process of building a small (4500m3 a year) sludge-water treatment plant. I'm removing heavy metals with coagulants and floculants, ending the process with a bio-reactor.
BUT: I have a problem with splitting very oil-poluted water. I need to something to clear the phases. (First step is sedimentation, but I have some process-water that won't clear the oil)
Would love some help. Don't mind paying for it.
Thanks!
Hi Bro,
I have experience in produced water and sludge oil treatment. You have to separate the sludge first to make easy oil in water emulsion separation in down stream. Due to rhe sludge has natural emulsifier those thighten the emulsion. After that you may treat the oily water with floc or coagulant chemicals.
Thanks
Hello. What about h2SO4?
Hello, unfortunately, we're not able to help much regarding your question. Our immediate staff available was not entirely sure how or when h2SO4 comes into play in our industry. The removal of Hydrogen Sulfite (H2S) from gas is prominent, but not so certain about Sulfuric Acid. If you need more help, feel free to call or email customer support.
I'm very sorry but there's something that confused me about how the density increase with heat while in fact the oil density must be decreased while we increase temp.
Heating oil will lower its viscosity, enhancing separation and increasing the density differential between the oil and water.
God bless
How in the hell did the oil and water separate so quickly????
Ha! The makeup of the well fluid and the conditions you expose them to will determine the speed at which it separates. The jar of oil & water shown in the video is from a well in Oklahoma and was only separating by specific gravity differentials and retention time.
اورق ترشيح ترشيحية
السلام عليكم
اخي اسامة عم قطر الزيت بعد مابيخرج من خزان التقطير يخرج اللون اصفر بعد ساعة يقلب اللون اسود
وبعد ايام يرجع اللون بني وفيه ترسيبات سوداء بقاع الاناء اذا تقدر تساعدني بحل المشكلة مشكور
Dear air,
I'm facing an issue in emulsion production. Can you give your email for details.
Thanks and regards,
M Rashid
You can reach Product Applications and Technical Support: (405) 525-4264 or prodtechsupport@kimray.com
Or for international, please find your region on this page to contact support: kimray.com/international
simple and helpful. Thank you.