Excellent. There is a difference between being educated and possessing the right skills to educate other people about what you know or you learned previously. You are the best instructor mechanic that I watched one of his videos here on RUclips. Thank you.
EXACTLY!!! I just worked on one beside the road and I couldn't even get my hands up in between the frame and the part crank case filter......hilarious!!!
I'm loosing antifreeze, I believe it's leaking around the back of the EGR cooler, but my crankcase breather is leaking oil also,I changed out oil pressure sensor because oil gage dropped in pressure, I had a new head put on about 3 months ago can you give me a ball park on what might be going on
@@user-do4ti9wb1s with everything said and done it cost 500 something at the dealer but I had other stuff done to. i think I it was replaced under warranty
All of a sudden I am blowing oil all over the bottom half of the engine. It was about .5 galllons in 800 miles but now I am at 4 gallons for 80 miles but I made it back home without a tow bill Do you have any suggestions?
Hi Brother I have DD15 EPA15 whit SPN 5246 code any idea what could be? I have reply’s few things, inlet filter, def filter dozer inlet filter and still came back 25% derate , any response I will appreciate
Just got bought my second one after two years. Note: go under the truck and put your middle finger that filter hole ass And see if it’s showing any oil on your finger. If yeah, then changed. That what I do. But it’s normally lasts every 500k . Note: my 2013 dd15 just hit 900k miles. So good luck about yours.
We want to see how you do it on chasis so we can see whom to follow.. you tat express or Francisco Amaya.. although tat express never gets his hands duty
Excellent. There is a difference between being educated and possessing the right skills to educate other people about what you know or you learned previously. You are the best instructor mechanic that I watched one of his videos here on RUclips. Thank you.
now that i bought my cascadia with the dd15 ill be all over these videos😁😁😉😉🙏🙏🙏
thx for this. ive been saving my pennies and getting ready to buy my first. these videos give me the confidence to do a lot of work my self.
What a dam great video tutorial on this part replacement. So professionally explained on all the key aspects!!!
This channel is going to get a lots of viewers. Good job.Thank you
do this in chassis on a fire truck!!! this vid is so simple..but try to remove it from coiming out bottom!!! good info to know!!
Super well explained thank you!!
Much easier out of chassis. .lol. .good video thanks
Very helpful much appreciated bud!! Thank you
Thank you for sharing really helps me.
i just replaced mine on dd15 Freightliner cascadia easy job and replaced th3 def filter also.. about 2 hours.
Great video thanks for the info. A video about egr maintenance would be nice. Thank you
Very easy out of the frame
EXACTLY!!! I just worked on one beside the road and I couldn't even get my hands up in between the frame and the part crank case filter......hilarious!!!
Very helpful. Thank you
Do You Have a part number for the seal that goes in the block ? Also how do You change it ??
Thanks, you showed us in detailed way
Can you do a video to identify each parts around the engine such as oil pump...fuel separator...oil filter...fuel filter...etc
great info luv the videos keep them coming
really nice video thank you question do you have a video to how replace a front crank seal
Do you know what cause the drop of rotation speed with time? bearing issue or turbine wear? great video, thank you.
Noticed some oil leakage coming from the block looks like I need to replace that seal
hi ,you are doing good job god bless you
can you tell please how to change turbo please thank you
Great good, Luv the videos, got my truck running great
Great information thanks Brother
Hi I enjoy and appreciate all the videos. Hope you will make more videos on all the other major parts that leak oil. Thanks.
Can you please do a video on how to replace the turbo?
Thank you
Oh how I miss the days of the 60 series DD before all this emission control BS.
Cool video ! Around how many miles would this part start failing ?
Nice job thanks for sharing
Your most likely going to need a metal connector to the block and that part # is A4720180044 and it’s $135.60 from Freightliner.
This channel is awesome
Thank you sir
Will a bad crankcase rebreather cause exhaust in the cab/sleeper?
Great , Excellent job , thanks
B noches ,cada cuantas millas se debe de cambiar, gracias 🙋♂️
Hey thanks alot for the help
Good thanks for sharing it valuable information.
Great video thanks a lot
Super good informative vedio 👍👍
Helped me
Thank you
I had one replaced but it's still leaking where the senor goes into the block I'm not sure if the dealer put a new seal on
That’s for the torque specs
I have a 2014 cascadia that has excessive oil bypass through this filter, i changed and still have the same issue. any idea on what to do?
Thank you for the video
2:57 hay lắm anh ơi, em cảm ơn anh nhiều
What’s the plugs part number and how do you change the plug out???
DETROIT DIESEL FITTING DDE-A0049971371
Great video
Tks
This part costs around $350 at the dealership
True legend.
Good Video 👍 thanks
I'm loosing antifreeze, I believe it's leaking around the back of the EGR cooler, but my crankcase breather is leaking oil also,I changed out oil pressure sensor because oil gage dropped in pressure, I had a new head put on about 3 months ago can you give me a ball park on what might be going on
How about doing it while on chase
just had m I ne replaced a week ago in Salt Lake oil everywhere on drive tran
How much for this repair
@@user-do4ti9wb1s with everything said and done it cost 500 something at the dealer but I had other stuff done to. i think I it was replaced under warranty
Thank you
Thanks 👍
All of a sudden I am blowing oil all over the bottom half of the engine. It was about .5 galllons in 800 miles but now I am at 4 gallons for 80 miles but I made it back home without a tow bill
Do you have any suggestions?
Can you do a video replacing the water pump? Thanx in advance
Can you show removing it while it’s in the truck or frame
Brother, di you have any idea on how to open a breather crankcase of a Maxxforce 13? Pls let me know. Thanks
👍🏼
If we only had that space to work with lol
Can you do oil filter housing gasket and oil cooler gasket
I am loosiing the coolant. And cranckcase has vapour a lot. Any idea? What had it broken?
I love this channel are you guys still in business
Yes sir. We are just sooo busy unfortunately we haven't had the extra time to do more videos.
@@detroitrebuildspecialist376 alright I’ll be down there for sure
Does the block plug come out easy mine is leaking and I need to replace it
Did u change your block plug yet
I have a 2010 how did u screw it in if block has no thread
Thanks for you, but could I test the turbo compound 4 speeds?
Mercedes actros mp4
Mine leaks from the block only do i just change the seal any thought?
If the truck doesn’t have the speed sensor on the filter, where would it be?
Hi Brother I have DD15 EPA15 whit SPN 5246 code any idea what could be?
I have reply’s few things, inlet filter, def filter dozer inlet filter and still came back 25% derate , any response I will appreciate
what is the part number?
What if they already change it and it keeps throwing oil?
Can this reduce the turbo airflow??
What is work of this part..????I mean why we need to change. Any problem of engine????
Please part number seal in block
Does anyone have or know how to do the newer ones where u need an adapter
My buddies crank case breather is not even plugged in so what's that mean?
how to install fuel meter in cascadia DD15?
Where you located?
How to change turbo?
When do u replace the crankcase how often?
Just got bought my second one after two years. Note: go under the truck and put your middle finger that filter hole ass And see if it’s showing any oil on your finger. If yeah, then changed. That what I do. But it’s normally lasts every 500k . Note: my 2013 dd15 just hit 900k miles. So good luck about yours.
Why do they leak?
👍🏼👍🏼👍🏼
I had mine replaced twice and it still leaks. What should I do?
You got either liner crack or ring piston problem, did you resolve your issue
?
Can you guys help me with the code SPN 5444 FMI 1 what’s that exactly issue
Do they ever think about finger space lol
It’s to easy out of the truck
Man do it on chassis.. Let see how you do..
We do it everyday sir. Like clock work :)
We want to see how you do it on chasis so we can see whom to follow.. you tat express or Francisco Amaya.. although tat express never gets his hands duty
do you have Instagram?
why would you show this on an engine out of the truck? useless.
Because he showing how to remove
What's the code?