Thanx 4 da info. guys. I just gotta wait for my warranty to expire and then I could really start playing around with the nitemare just like i did with my old 03 lightning :( ( i shuold've kept my old truck)
I just picked up a 5.4 3v with the roush supercharger. I have a 2v mustang, plan on locking phasers and slapping it in my 96 gt. Looks like it'll be fun.
@nitemare150 It depends on where your power is really, just do a dyno run and see where your power is. My stock setup on my truck needed to shift no more than 5300 bc it didnt make much power after that. Now with my new cams and other mods, I can shift at 6000. My truck is N/A yet it can do 0-60 in under 6 seconds..fastest is 5.3 so far. Again, no blower, all motor..ported heads, big cams..lots of stuff..I trail the S/C truck in the quarter..now if I just install that blower..i would kick butt!
Ford oil pressure gauges haven't actually functioned for many years. They either say you have good oil pressure or no pressure at all. I believe they can be modded to show actual pressure though.
Thanks, good info, what so you think I could do ? For now I just want to find a way to take of the speed limiter and keep the roush tune and then work my way up with the mods.
bad ass now thats how u shift.... p.s reving that high dont hurt a Ford as long as you dont hold it there for a long period of time. thats small block ford high reving horsepower . i have an old school '86 F 150 with a 351 Windsor with Alluminum Heads and a comp cam that has a 3500 to 6800 power band and i spray a 200 shot on that through an Holley carb a wet kit that is.
upped mine to a 4.11 posi, its so fun for burn outs. doesn't have top end like you, but shit the trucks beast no matter what right? how'd you get it tuned with the roush pcm? isn't it encrypted?
What's your top speed?? I got my truck to 140 before chickening out...I was in 4th at 5000 rpm...peak HP is at 5300 with my set up...so I still had some pull left.
RoushNItemare, I see that you changed your shift points to almost 6000rpms. Were you able to do that b/c of the long tube headers? I've recently got a smaller upper pulley and a custom tune, my shift points are at around 5200rpms. I also ran a recent 1/4 time of 13.7 @99.8, it was also about 95 degrees with 100% humidity when i ran it. It was on stock tires, but where hooking up well launching at 1200-1500rpms. Just trying to find out what my next step is going to be Mod. Any suggestions?
DAMN BRO ITS SOO FUNNY HOW ALL THESE PPL HERE HAVE NO CLUE WAT KIND OF TRUCK THIS IS lol THATS A BAD FUCKIN NITEMARE MAN.. ROUSH DEF. FILLED THAT VOID SVT LEFT WHEN THEY DIDNT BRING OUT THE LIGHTNING.. THIS RIGHT HERE IS A REAL BEAST BRO !! BAD FUCKIN TRUCK BRO
Definitely the fastest f150 I've seen on youtube. Love it.
Damn wish my 5.4 could do that
At first I was like oh this thing is slow and then you punched it and I was like holy shit haha
Holy shit that things insane even at over 80mph nice truck
IT"S ANGRY! What a beast man. Congrats.
thats bad ass man. looking into one for my next truck
I dont always drive f150's....... but when i do I drive this one
Stay fast my friends
Just bought one of these on auction. 27K miles. I'll be getting it this weekend. One bad a** truck. Only 100 of them made.
hey man thats a quick ass little truck you have there
HOLY SHIT!!!!!! It started out slow then all of a sudden rargh!!!!!!!!!!!!!! That scared the shit out of me!! damn!
Wow that's some put you in the back seat acceleration
Wow very impressive
Thanx 4 da info. guys. I just gotta wait for my warranty to expire and then I could really start playing around with the nitemare just like i did with my old 03 lightning :( ( i shuold've kept my old truck)
I just picked up a 5.4 3v with the roush supercharger. I have a 2v mustang, plan on locking phasers and slapping it in my 96 gt. Looks like it'll be fun.
Not gonna lie, that's impressive.
I personally like my 5.4s stock but that was f****in awesome
i love your truck...
@shawnboy87 yes I see its as an automatic, but if you watch bid closely he drops truck into first and then shifts it to 2nd then to drive
@nitemare150 It depends on where your power is really, just do a dyno run and see where your power is. My stock setup on my truck needed to shift no more than 5300 bc it didnt make much power after that. Now with my new cams and other mods, I can shift at 6000. My truck is N/A yet it can do 0-60 in under 6 seconds..fastest is 5.3 so far. Again, no blower, all motor..ported heads, big cams..lots of stuff..I trail the S/C truck in the quarter..now if I just install that blower..i would kick butt!
Ford oil pressure gauges haven't actually functioned for many years. They either say you have good oil pressure or no pressure at all. I believe they can be modded to show actual pressure though.
Nice trick with the gearshifter lol but overall bad ass truck
thing sounds like a fuckin beast!
just bought a roush NM and i'm lovin it
holy shit ! that's a quick truck....like to see a vid from a standing start....
HOLYYYY SHIIIIITTTTTTT!
nitemare trucks are badass and rare
Good lord. Nice. Really surprised how quickly it picks up RPM. Wish mine would do that. LOL.
Thanks, good info, what so you think I could do ? For now I just want to find a way to take of the speed limiter and keep the roush tune and then work my way up with the mods.
Speedy.😮
The new 2014 tremor just tune will do this bro!
HOLY SHIT! I had a chance at one today! 2008 38/100. It was white SC with Flareside. and 22's BEAST FROM HELL. I'd love it over my 08 4.6,,,,,:(
You had a golden opportunity to own one of the last ones to come out in 08 and didn't even know it.
puppy love
Good shit!
all i can say is WOW! what configuration is your truck?
Damn, Bro'. That's crazy fast! What gears are you running in the rear of that beast? 3.73?
i was watching and was like this is lame then you hit the gas and i was like holly fuck, nice truck man
@RoushNitemare jeez, and it had no problem revving that high?
What size pulley are you running? My new true dual exhaust is finally installed on my Nitemare (#87) and now I'm looking to up the boost.
How? And where did you filmed that video?
It sounds like a monster.
Nice
wow thats alot faster than mine!
Yessir
@1151672 thats one of the most rare pieces of machinery ford has made. only 122 made correct?
Holy shit that was fast
I got an 08 nitemare, what did u mean by a tune-, Did u take it to a place with a dyno tune or did u mean,a tune like a Diablo or Edge tuner?
NICE! You still
Got it? What mods and what Number is this one? I just snagged number 47
dam that was fast
bad ass
bad ass now thats how u shift....
p.s reving that high dont hurt a Ford as long as you dont hold it there for a long period of time. thats small block ford high reving horsepower .
i have an old school '86 F 150 with a 351 Windsor with Alluminum Heads and a comp cam that has a 3500 to 6800 power band and i spray a 200 shot on that through an Holley carb a wet kit that is.
Holy shit.
Nice. Whats wrong with the oil pressure gauge? It never moved.
Is your valvetrain stock are did you upgrade your springs because I've never seen a stock engine rev close to 6K rpm. Cool vid tho
He probably has a tuner where you can adjust shift points
Bradley Smith if yall didnt notice he is shifting manually
+biggin5434 Stock 5.4L 3 valve springs can rev to and above 7,000 RPMs.
+Brian Robertson good to know thank you
I have 06 Boss edition with 10psi. Wonder what it run?
if u wanna know how fast ur going over 120Mph u can set the mileage to digital MPH
upped mine to a 4.11 posi, its so fun for burn outs. doesn't have top end like you, but shit the trucks beast no matter what right? how'd you get it tuned with the roush pcm? isn't it encrypted?
These can't be tuned?
Btw he's shifting manually.
Hey I'm from Louisiana we would be a good race .. We should meet up to see what that supercharger has in hand
@20044runner Because it is a precisely design Ford engine. :))
What's your top speed?? I got my truck to 140 before chickening out...I was in 4th at 5000 rpm...peak HP is at 5300 with my set up...so I still had some pull left.
I love it!🥲 I have a stock 2006 5.4l triton v8 that I want to roush charge
yummy, what kind of numbers?
what type of tq convertor is in it? seems huge!
I gotta ask how can you stand those 45 degree sweep min gauges?
RoushNItemare, I see that you changed your shift points to almost 6000rpms. Were you able to do that b/c of the long tube headers? I've recently got a smaller upper pulley and a custom tune, my shift points are at around 5200rpms. I also ran a recent 1/4 time of 13.7 @99.8, it was also about 95 degrees with 100% humidity when i ran it. It was on stock tires, but where hooking up well launching at 1200-1500rpms. Just trying to find out what my next step is going to be Mod. Any suggestions?
what pulleys are you running?
How often do you take that thing to 6k?
Needs a mild cam :]
Where do you live?
Want...need...
i dont understand why you shifted from 2nd, to 1st to D? how does that work?
It was on a dyno when you did this right.
HOY SHIT thats some nice acceleration lol
how did u take off the speed limiter?
How to cam phasers hold up to that
Jesus.. 😦
DAMN BRO ITS SOO FUNNY HOW ALL THESE PPL HERE HAVE NO CLUE WAT KIND OF TRUCK THIS IS lol THATS A BAD FUCKIN NITEMARE MAN.. ROUSH DEF. FILLED THAT VOID SVT LEFT WHEN THEY DIDNT BRING OUT THE LIGHTNING.. THIS RIGHT HERE IS A REAL BEAST BRO !! BAD FUCKIN TRUCK BRO
Love Nightmares
What kind of mods id u do?
Shifting manually?
HOLY FUCK!!
Nice hill. Now try it on flat ground bro.
Where abouts?
hmmm wonder why the hell the made 5k the redline when its supercharged and also has plenty of power up to 6k..ish
WOW , ,
i would like to run one of these!!! jajaja
GOOOOD SHIT!!!! That fucker hauls ass!!!!
Pretty sure you went over 120MPH. Your speedo stops but your tach doesn't.
agreed. lol
+Mike Barton tach never stopped
+Chandler Mason thats what hes saying fool
thats not a truck, ITS A ROCKET SHIP!! lol, fuck thats fast
I want this truck
do you hear the sound of that
120 km/h
If my truck could hit 6k rpms before shifting I'd be WHOOPING people but im stuck shifting at 4,700 ish☹
i own a nitemare too, #77 of 100, you should see what a 4.11 rear end does to this thing lol
0:12 to 0:28 EARGASM
@ashtrey05 i here a supercharger dont i
i want to see this truck!!!!!!!!!!!!!!!!
@RoushNitemare PUT 4.10S IN dude!
for the first 13 seconds i was pretty disappointed.. then i said... oh
pay attention, it says kmh, and mileage is 200000? makes sense.
Hope thats not really a question you just asked...
Wow that truck hauls ass....
@RoushNitemare everyone in Texas has a heavy foot
Hahahahaass ABS light and more.
damn i wish mine would turn 6 thousand rpms
Get a tuner