How much better is a Beam Antenna over a Multiband Dipole on 10m?
HTML-код
- Опубликовано: 5 сен 2024
- A short comparison between my M0CVO HW42 & my 10m Moxon Beam.
If you want to build the 10m Moxon, heres a video I made earlier -
• Cheap Effective Moxon ...
"station manager" hilarious explanation for XYL.
🤜🤛
😁
Yep 😂
Moxon doing the business there Colin. My friend Simon GM4JXP carries one of those on SOTA activations and works the World!
This 10m one is easily light enough to carry up a hill. Doesn't need to be too high either.
Huge difference Moxon is the winner 🏆
Definitely, its nice to have the confirmation though through testing.
Thank you for the testing demo. Impressive results but I guess they have their own pro's and con's.👍🤠
Absolutely, Horses for courses.
Very cool to see. I've been looking into making a 6m moxon.
6m a doddle Mike. Much smaller than this small 10m one.
Tnx for comparison,73!
Your welcome 👍
Thanks for taking the time to do this. Good info.
Your welcome.
Great comparison Colin, its what I would expect. In most cases a beam should out do a wire however i did do some experiments some years ago with a friend in Leicester who had a field and used wire verticals. The beam won but the margins were smaller. His noise floor was also very low. Doesn’t matter about apples for apples comparisons, these are the tests that matter for the individual within their own QTH boundary. If you can achieve that low angle of radiation with a vertical you can get good results but i don’t see it beating a beam. Happy New Year, Regards Mike
Your spot on Mike, everyone's milage will be different so its preferential to experiment yourself. The results are not always what you think they will be. Happy new year 🎉
More than a bit late noticing the video, but that was decidedly interesting. It really is a pretty significant difference. In the heat of battle for a difficult QSO, the Moxon is going to wipe the floor with the OCFD in practice.
Now, a vertical with a reflector though. That’s quite an easy thing to set up and would be quite interesting to see back to back.
I agree on the difference. For the higher bands I find the Moxon easy and it doesn't need much of a mast. You can turn that easy vs parasitic verticals. I will be getting back to phased verticals soon.
Nice one thanks it was very interesting. Am looking forward to a comparison with the 5/8th vertical.
Me too. I need my PC RFI issue rectified first.
The moxon is such a great design.
Its one of those Iconic antennas and deservedly so.
A well paced comparison Colin, too many people post comparison videos where it is difficult to keep up with them switching rapidly. As for noise in general, have a look for GM3SEK "Clean up your shack". I made a few of his mains filters with integral common mode choking and the results were remarkable. But as the doctor would say "use as directed". 73
Beleive it it not I built the mains filter and its fitted here, PC and Radio into it. The PC's PSU is just so dirty. They have acknowledged this, just trying to agree a suitable replacement. I wish I had a twin RX radio for simultaneous comparison but the 590 does a fine job for what it is.
@@MM0OPXFieldRadio hope you get the PC noise issue resolved, it can take a lot of the fun out of the hobby. I have a few rigs with diversity receive, it really is a game-changer but understandably it may not be an option right now. Your Moxon does appear to work well, quite impressive. I have fairly limited space and it is a challenge to get the aerials for every job.
@MM0OPXAmateurRadio The 590 is a fine radio compared to the junk being promoted by so many hamtubers. How they can recommend a Xiegu over a Yaesu is purely dishonest. Thanks for keeping it real.
@@radiotests Thanks, I should make a video on the 590.
I have found many people getting hung up on Antenna Modeling dealing with radiation patterns. Keep in mind, it's an idea of what your pattern may look like. It isn't set in stone, and it isn't absolute. It has been my experience those peaks and nulls are far more dramatic in graphs due to hard edges going from one point to another. There is no smoothing of the edges, and can really make patters look worse than they are.
Yes I agree, real world testing is always preferential. At least this was I know for sure.
I love antennas! 😆
The Moxon wins hands down on both RX and TX. With the gain on the Moxon your ERP has to be approaching 2KW. The ERP on the OCF antenna is going to be less than the power you are putting in with coax and balun losses plus the relatively low or no gain present with an OCF even on 10M. Even though it's technically 2 wave lengths, your not getting any gain from that unless it's at least that many wave lengths above ground. Achieving gain on an antenna is important in amateur radio communications where you are competing with a lot of other stations in Europe and North America running a KW plus plus plus. Great comparison video. I really want to build this 2 element Moxon and stick it up on the peak of my house roof at about 10 meters. A cheap simple TV antenna rotator would handle it no problem. At a wave length above ground, it has to be in the neighborhood of 5 to 7DB of gain. Cheers to the station manager for keeping you in line with planting antennas in the garden :)
Great comments 👌. When I was testing the 5/8 vertical, took me a few calls in the pileup but the Moxon it was first time every time. Thats the ERP your talking about, makes all the difference. I've had one of those TV rotators and yeah more than beefy enough.
Not sure how you get 2KW Erp....moxon maximum 5 Db forward gain...same as Hexbeam....
I doubt it's even 1 Kw but still useful gain.
I replayed the antenna switch and watched the S meter. 3db is what I saw. The side and rear rejection is also better with the Moxon. I'm going to use an OCFD for my general band and hope to get some help from local hams raising a 10m Moxon with 2m and 70cm on the same mitary mast. It will have the "armstrong" rotator. 😂
So on the Kenwood, 1 S unit is 6db, on my Icoms its more like 3db ber s point. On The stronger signals S7+ the drop was 2 S units so thats minimum 12db. I didnt include all the clips or the video would have been so much longer. The OCFD is still a very good all band antenna, no regrets. Good luck when you get your general 👍
On my list Colin 73 happy new year chap
Yeah once you use one you wont go back.
@@MM0OPXFieldRadio good morning Colin I built a single element delta loop due to my noise floor that was fantastic cut for the 10m band used a 1/4 wave length of RG6 to make a matching stub, SWR across the the band was good managed to open several repeaters in Europe and could hear the parrot repeater in New York.
@tonym7cvk430 I like loops too. I have one of these on my build list.
I enjoyed your antenna comparison. It would appear that I’d be able to pick you up in eastern New York, but I don’t think you would have heard me on my Icom 705. Cheers, Bill KC2KNA
Quite easy to hit Bill if the band was open. If you were using a beam the 705 would likely work. These were all big guns with beams and a KW. Just not great conditions on the day.
10 mtr Moxon size comparison to a mono 10mtr hex. Garden here 20'x40' hence the question. GM0EEH Jim
Either would easily fit. Go with Moxon as simpler for mono band and more gain and F/B
@@MM0OPXFieldRadio
Thanks for the input on the gain
Hi.... I need your help . Seems like we have same radios . I have same noise level with my vertical sirio 827. You think using a similar moxon antenna or EFHW could be better ? But I am not for the performance tho ....
So its not just as simple as that. Your noise coild be coming from anywhere. Your antenna is very good for 10m. Turn off your mains electricity and run your radio of a battery and see if the noise is still there. If it is then you are not causing it. Its unlikely of of your suggested antennas will have less noise.
Your new computer noise issue could be a result of the cpu frequency/ multiplier. Is your cpu speed fixed or variable. Also switch on the computer then remove connections for monitor, keyboard mouse etc to see if noise is generated withe the case or the connected cables. Cheers GM0EEH Jim
Not sure re CPU Jim. Done the check removing all cables and its still there. Its currently away having its PSU swapped as I made a wee sniffer that was just a short patch lead connected to my 705 and it seemed to be originating from PSU. Fingers crossed.
@@MM0OPXFieldRadio
Ok all the best hope you get it sorted
Great for 11m
Absolutely 💯
Have you ever compared the ocf with your efhw? Cya Colin
Yes, mono banded on 20m. No real noticeable difference apart from the EFHW was slightly quieter. Both are dipoles at the end of the day.
@@MM0OPXFieldRadio I’ve noticed that as well. Actually the efhw is a tad more than slightly more quiet on rx. I’ve only tried it in the inverted L
A great vid and conparison, could there be a null for the OCF? Cheers and all the best, 73
That my opinion anyway. I had an Italian station stronger on the back of the moxon over the OCFD. Thats some null!
Advance Happy New Year from the Philippines! I will try and make a Moxon sometime. 73, DW1QEW.
Its a great beam to build. Happy New year 🎉
@@MM0OPXFieldRadio Thank you so much and all the best to you and your family.
Greetings from Perú…. I Hope to meet in the 10 meters band. OA4-BUO
Likewise, I have had a few QSO's with OA on 10m