That shin is very clearly a bootleg. The details are faded, and the paint is horrible. I have one and it looks nothing like the one you have. The details are sharper, and the paint is much better. If you knew how molding bootlegs worked, you’d know how the original figure had the Toho stamp on the bottom of the foot. The people who had cast this figure did not take the time to cover it up. edit: It’s insane how many doofuses reply to this comment disagreeing with me. This isn’t my opinion. It’s a fact. Someone in the replies even mentioned they had the bootleg as well as the authentic release and agreed that the one in the video matched up perfectly to the bootleg.
And even then, why would they want to remove it? The entire point of a bootleg is to trick you into thinking it’s official, so why would they remove the stamp?
Listed figures in order (all of them) 0:00 - 0:53 Intro 0:54 Showa Era starts 1:00 ShodaiGoji (1954) 3:09 (1956) 3:46 KingGoji (1962) 4:47 MosuGoji (1964) 5:47 Heisei Era Starts 5:50 84Goji (1984) 6:20 Nes Godzilla 6:33 red, super Godzilla and bagon 6:42 BioGoji (1989) 7:37 BioGoji covered with bios slime 7:57 SpaceGoji (1994) 8:11 Burning Godzilla (1995) 8:43 Saint patricks day godzilla 9:15 Millenium Era starts 9:34 GmkGoji (2001) 2:30 GmkGoji atomic breath version 10:40 S.O.S Goji (2003) 11:55 S.O.S Goji with kiryus maser bolt 12:13 Riva/Legendary Era starts 12:17 (2014) 12:37 24 tall inch 2014 12:58 ShinGoji (2016) 2:23 ShinGoji atomic breath version 10:23 Godzilla earth (2017-18) 15:40 KOTM Goji (2019) 16:19 KOTM Goji atomic breath version 17:14 Thermo Goji 17:41 KOTM Mosura (2019) 18:13 Baby KOTM mosura (2019) 18:31 KOTM Rodan (2019) 21:01 NECA lost the writes to Godzilla 1954 - 2023 (there's another movie coming out in 2023, this is in 2022 so if there's a movie in 2024 don't complain) how sad 21:07 - 22:07 Outro
I think the Mothra figure would've been better if the wings were on ball joints and made of flexible plastic with a bendy wire frame to allow more dynamic poses. They should've also made a battle damaged version with a partially torn wing.
Maybe its a good thing I discovered these Neca Godzillas when they rereleased them in the poster art boxes. Based on many reviews, looks like the Neca figures in the movie art boxes had been repainted and some minor changes were made as well. Shin Godzilla probably had the most obvious overhaul with better paint and fixed issues with articulation.
Even though there are better figure options out there I was really sad to learn that neca would be losing the Godzilla license because they were practically only figures I could find in stores and I do hope that they get the license back maybe even get some other characters besides Godzilla Rodan and Mothra
@@vast9467lower quality i doubt, but higher price? Dude you right, i fucking hate how these plastic chunks are so extremely expensive, the worst of all is these figures are literally Neca but with some more articulations and more variety (The variety doesn't help too much if various of these figures are limited)
@@Ella827 he said he bought a third one and it looked like that. And the way the ball joint looks kinda confirms it’s a bootleg. It has all these weird square holes in it while the official one is solid.
12:34 Don't feel bad about the giant version, the tail fell off a lot and it was a literal pain to put back on. The spines were sharp and the ball joint would not want to fit in its socket. In the end the toy was lost to time as I gave up putting that thing back on.
With rodan, there actually is a way for him to stay in place on the stand. If you look closely on the top of the stand, there are some groves for the spikes on his stomach to fit into to further secure himself. Now there is a sweet spot on his stomach that you’ll need to find yourself and you’ll need to kinda move it around until it stays in place. (Or this is all with my figure and my figure’s torso is so conveniently molded to fit perfectly. Hopefully everyone else’s has a sweet spot or Huston we have a problem.)
Kinda wish they made every incarnation of the big guy and didn't lose the rights. I personally have the 1954 and 1995 Godzillas. Great video! Keep it up! 😁👍
@@GojiWars hopefully if they do get the license back they'll make some other kaiju from godzilla like King Ghidorah, Mechagodzilla, Zilla, Gigan or maybe some other Toho Kaiju like the Space Amoeba trio or the Gargantuans
@@thevenomspino they should also make the 62 Kong. Would love a figure of that design and plus it would make sense since they already made the 62 goji.
I could not agree with you more about wanting an articulated NECA Zilla figure. I know most of the Godzilla fanbase has disdain for Godzilla 1998 (rightfully so, fuck Dean Devlin for forcing Roland Emerich to direct Godzilla). But I grew up watching Godzilla 1998, I love it. I still remember I burned out my VHS tapes of Godzilla 1998 and Godzilla vs Biollante as a kid.
@Conv-Piece You are so correct! To support what you said, look at NECA's Alien vs Predator lines: nobody likes AvP or AvP-R, but the figures that NECA made for those movies cannot be found for a decent price!
I hope NECA gets the license back. I think should start reselling some of their old figures and update some of them. They should also make new Godzilla figures like MireGoji and MekaGoji and figures for other titans and Kaiju like Zilla, Mechagodzilla, and Methuselah.
I’ve got all of NECA’s Godzilla figures and still have a proud display of them. I might start getting Hiya’s Godzilla figures once funds are stable again.
I’m getting 2019 sh monster arts and thermo, and also I found them on Amazon for 24.57 normal version and 25.54 for thermo lol edit: I don’t care if it’s a boot leg it still looks very good
I actually have the big 2014 one! I could it for Christmas and I’ve some how lost the tail. I do hope Neca gets the license back and makes more of these BIG Neca Godzilla toys! Because they can scale with Lego very well
I think you might have just gotten a bad shin godzilla figure. The one that I got has a good paint job and the joints are solid. Unfortunately, the ugly painting on the tail is a consistent issue. I do agree that the joints, especially on the tail, could have been better.
I will also say for the Rodan, while I do prefer it to my monsterarts (do to paint mostly). My stand was bent too. Its the hole in the "explosion" effect......It was drilled at an angle. Some have it, others dont. Over time I've actually grown to like the slight bend as it gives off a more dynamic pose. I do think both Mothra and Rodan's stands should have had a ball joint at the base so this issue would never happen. As for getting Rodan to be still on the stand. There are little creases that kind of "snap". Its more toward his chest. He will still move and wobble but it does seem to lock him in place. I noticed that its not the same for ever figure though and depending on if yours has more or less paint....it may not snap. I cut a small crease in with a knife and that seemed to fix my issue. I dont have the monsterarts mothra but the wings on mine were very loose. I had to glue mine as well.
They were planning to make a Kiryu possibly and that’s why he has the scar and the mazer blast ver, but when they lost the license all plans were cancelled
i had a similar origin to spino. the 1998 movie was the first one i saw, then there was the 2014, and then 2019, and then my interest just ascended from there.
@Ryoichi Steven Recio Trendmasters made one back in the 90’s, and it’s actually how Zilla appeared in Final Wars. They just scanned a Zilla figure and animated it.
8:26 Dude, the exact same thing happened to me when I got burning Godzilla! Everything was super stiff and head ended up popping off when I tried to move it. Ended up having to order a second figure and that too was also really stiff
Could be worse, payed $50 AUD for mine at a convention when it first came out, on the last day of the convention. Right hand snapped out of box. Went to move the head, it also snapped... It was so tight I swear it was super glued in. Oh and the base of the tail, same issue. Hate that fkn figure
Just don’t see him at night. Overall that would be a good figure but put him somewhere you know where it is yet can’t see him to much. Like only where you can see his tail. Otherwise you might as well just go to the bathroom at night and see this thing as it stares into your soul.
For the SOSGoji, there's a metal version of Kiryu and SOS Kiryu released by Chogokin that is close in scale and works well for display purposes with the Neca figures. There's also a '74 and '75 MechaGodzilla available, and a Final Wars Gigan. I managed to grab a few of the Neca Godzilla's when I heard they lost the licensing. I've only opened a couple, but I enjoy them a lot. Great Video.
This was a real nice video to relax to. I have the 1954 Godzilla and the regular "Goji V. Space-Goji" Godzilla figures myself at my local Walmart, and admittedly splurged about $30 on Amazon for the 2019 Legendary Godzilla because It looked really good (I'm a sucker for detail, and these figures have good-to-great detailing on them). But yeah man, great video :)
I think the reason why BioGoji looks strange is because they probably based him off the suit that was used for water scene (3 suits were used for Godzilla in GvsB: Land suit, Water Suit, and the “no good” suit).
I actually own a NECA Shin Godzilla figure. The one thing I hate about it the most is the head come's off VERY easy and one time I actually lost the head, but thank god I found it.
I think the atomic breath shin goji is way better that the normal version,i mean at least in mine I don't have any problem with the articulation and the face looks more accurate to the movie, it's a shame that the normal one doesn't look too good, but anyway, great review dude, your collection is awesome :D
Very nice video, I love seeing people do retrospectives on figures like this. While Neca isn’t a nice and friendly company (quite slimy actually) I really enjoyed their Goji figures and I have plenty with my favorite being ‘54 Goji. I always hoped they’d get to my two favorites Final Goji and Megaro Goji are my top two. Also Millennium Goji but sadly no. I wish Neca could’ve continued this line but we can Thank Playmates for reportedly wanted sole distribution for Godzilla toys and to me they’re making nothing but crappy looking kids toys with horrible paint and no care. Neca was the middle ground between overpriced Monsterarts and nicely priced but hard to find (for me) Vinyls, now the middle ground has become the Bandai Vinyls and if you want good Goji figures then you better save the hell up. Now considering my favorite Godzilla is finally getting a figure... I better save up for Final Goji. Again, nice video I really enjoyed it and your opinions.
That’s nothing new for Playmates. They did the same thing with the TMNT license for years before Nickelodeon allowed other companies to make Turtles figures. If they get a license, they do not like competition for their subpar figures.
The shin i got from Target was actually very very nice it had a little bit of trouble with the arm but that’s OK overall it was nicely painted and it came with its own atomic breath
I actually like the NECA Mothra figure, since it is translucent, kind of like in the movie (when one side of the wings are put under light the other side appears to glow) I thought that was cool and also though the wing design was closer to the movie then the SH-Monster arts
Oh hell yeah. Another Zilla fan? I really hope we get a figure of him in the future. While looked down on back in the day he's far more warmly welcomed now by fans. Heck, he's even in the comics as a sort of underdog kaiju.
That shin is very clearly a bootleg. The details are faded, and the paint is horrible. I have one and it looks nothing like the one you have. The details are sharper, and the paint is much better. If you knew how molding bootlegs worked, you’d know how the original figure had the Toho stamp on the bottom of the foot. The people who had cast this figure did not take the time to cover it up.
edit: It’s insane how many doofuses reply to this comment disagreeing with me. This isn’t my opinion. It’s a fact. Someone in the replies even mentioned they had the bootleg as well as the authentic release and agreed that the one in the video matched up perfectly to the bootleg.
Plot twist
You have the bootleg figure and the real one is crap
@@carteryt5477 yonk
@Benjamin McCoy **PLAYS WHO WILL KNOW IN THE BACKROUND**
And even then, why would they want to remove it? The entire point of a bootleg is to trick you into thinking it’s official, so why would they remove the stamp?
@@wumpus976 exactly
Listed figures in order (all of them)
0:00 - 0:53 Intro
0:54 Showa Era starts
1:00 ShodaiGoji (1954)
3:09 (1956)
3:46 KingGoji (1962)
4:47 MosuGoji (1964)
5:47 Heisei Era Starts
5:50 84Goji (1984)
6:20 Nes Godzilla
6:33 red, super Godzilla and bagon
6:42 BioGoji (1989)
7:37 BioGoji covered with bios slime
7:57 SpaceGoji (1994)
8:11 Burning Godzilla (1995)
8:43 Saint patricks day godzilla
9:15 Millenium Era starts
9:34 GmkGoji (2001)
2:30 GmkGoji atomic breath version
10:40 S.O.S Goji (2003)
11:55 S.O.S Goji with kiryus maser bolt
12:13 Riva/Legendary Era starts
12:17 (2014)
12:37 24 tall inch 2014
12:58 ShinGoji (2016)
2:23 ShinGoji atomic breath version
10:23 Godzilla earth (2017-18)
15:40 KOTM Goji (2019)
16:19 KOTM Goji atomic breath version
17:14 Thermo Goji
17:41 KOTM Mosura (2019)
18:13 Baby KOTM mosura (2019)
18:31 KOTM Rodan (2019)
21:01 NECA lost the writes to Godzilla 1954 - 2023 (there's another movie coming out in 2023, this is in 2022 so if there's a movie in 2024 don't complain) how sad
21:07 - 22:07 Outro
@johnny labaya ?
@@FloppyTheRabbitwhat did he say?
rights*
I think the Mothra figure would've been better if the wings were on ball joints and made of flexible plastic with a bendy wire frame to allow more dynamic poses. They should've also made a battle damaged version with a partially torn wing.
There is a mothra figure like that but it might be a bootleg neca but it has good articulation
7:15
"It's not the same as the movie"
The head: Is exactly the same as the movie
fr
I think he didn't think it was the one from the movie was probably due to the sclera being painted white and being way too big
Godzilla’s eyes aren’t that white in the movie
Frrr
A
Maybe its a good thing I discovered these Neca Godzillas when they rereleased them in the poster art boxes. Based on many reviews, looks like the Neca figures in the movie art boxes had been repainted and some minor changes were made as well. Shin Godzilla probably had the most obvious overhaul with better paint and fixed issues with articulation.
13:30 spinozilla kicks shin godzilla the third
Yeah right
Finally,someone who isn’t calling me “fakezilla”
Sheesh why did America design you like that
@@eelynnelim2422 the director didn't care about how he looks or if he even have a atomic breath so basically he just wanted money
E
Fakezilla😄
@@eelynnelim2422 I DONT KNOW :(
Even though there are better figure options out there I was really sad to learn that neca would be losing the Godzilla license because they were practically only figures I could find in stores and I do hope that they get the license back maybe even get some other characters besides Godzilla Rodan and Mothra
Hell o
And affordable to
There isn’t better options sh figuarts is lower quality for higher price
Hiya toys? @@vast9467
@@vast9467lower quality i doubt, but higher price? Dude you right, i fucking hate how these plastic chunks are so extremely expensive, the worst of all is these figures are literally Neca but with some more articulations and more variety (The variety doesn't help too much if various of these figures are limited)
12:06 there’s that mecha Godzilla model kit
It’s Gipsy danger not MechaGodzilla
@Tu Thai I’m pretty sure they’re talking about the fully articulated kiryu model kit, it’s around $90 and doesn’t scale bad with neca godzilla 2003.
Its like 8 inches so it looks weird compared to this
I love how when he moves on the previous Godzilla looks at it like
"Oi mate you stealing ma spot light?"
Lol
@@godzilxd1960 no lol
Mega lol
Holy that’s a big spac I can do that
@@godzilxd1960 you wanna see a big
spac?
Hey you made it!
k now it’s the end
Syrup?
My shin Godzilla looked amazing, it had super on point paint.really goes to show how much these things can differ
Same with mine
His is most likely a bootleg.
I’ve seen a bootleg shin floating around
or his shin, gmk and sh momsterarts earth godzilla were all bootlegs
@@EpicSonicBrosOfficialit is a bootleg shin godzilla because it shouldn’t have the Toho logo on its foot.
@@Ella827 he said he bought a third one and it looked like that.
And the way the ball joint looks kinda confirms it’s a bootleg. It has all these weird square holes in it while the official one is solid.
12:34 Don't feel bad about the giant version, the tail fell off a lot and it was a literal pain to put back on. The spines were sharp and the ball joint would not want to fit in its socket. In the end the toy was lost to time as I gave up putting that thing back on.
With rodan, there actually is a way for him to stay in place on the stand. If you look closely on the top of the stand, there are some groves for the spikes on his stomach to fit into to further secure himself. Now there is a sweet spot on his stomach that you’ll need to find yourself and you’ll need to kinda move it around until it stays in place. (Or this is all with my figure and my figure’s torso is so conveniently molded to fit perfectly. Hopefully everyone else’s has a sweet spot or Huston we have a problem.)
Kinda wish they made every incarnation of the big guy and didn't lose the rights. I personally have the 1954 and 1995 Godzillas. Great video! Keep it up! 😁👍
@Zero i have all the godzilla 2019 figures
@@gladiator674 even the bandai?
@@FloppyTheRabbit no, i was meaning all the neca ones
@Aokiji i have two 2019 bootlegs 😔
@@chasehodgmo5537 a boot legged Neca?
Sad that the line ended last summer. I really wanted a 68, 74, 2000 and 04 goji.
hey, at least Super7 will make articulated godzilla figures. And also, NECA has stated that they would be interested in reaqquiring the licsence
Yeah a final wars goji would be pretty cool
@@GojiWars hopefully if they do get the license back they'll make some other kaiju from godzilla like King Ghidorah, Mechagodzilla, Zilla, Gigan or maybe some other Toho Kaiju like the Space Amoeba trio or the Gargantuans
@GAVIN ORTEGA they should be 6 inch scale, the reaction fig is go8ng to be 3.75 inch though
@@thevenomspino they should also make the 62 Kong. Would love a figure of that design and plus it would make sense since they already made the 62 goji.
I could not agree with you more about wanting an articulated NECA Zilla figure. I know most of the Godzilla fanbase has disdain for Godzilla 1998 (rightfully so, fuck Dean Devlin for forcing Roland Emerich to direct Godzilla). But I grew up watching Godzilla 1998, I love it. I still remember I burned out my VHS tapes of Godzilla 1998 and Godzilla vs Biollante as a kid.
As much as people hate it, if released, it likely would sell well
@Conv-Piece You are so correct! To support what you said, look at NECA's Alien vs Predator lines: nobody likes AvP or AvP-R, but the figures that NECA made for those movies cannot be found for a decent price!
@@TheReidmeister96I really want it I don’t hate the movie either I actually really like it
4:39 As spino calmly gives king goji horrible memories
Lol
🤣
@@Destroyahzilla430 dun dun dun
WTH
@Someone on the internet no wasnt talking bout that i see this patrick star guy everywhere
"this is the last thing i bought at toys r us"
*laughs in canadian*
Lol yea
My legendary Godzilla figure it’s tail falls off if you bend it to far
@@usmansowe8891 you replied to the wrong comment my dude
I’m Canadian too
*cries in british*
I hope NECA gets the license back. I think should start reselling some of their old figures and update some of them. They should also make new Godzilla figures like MireGoji and MekaGoji and figures for other titans and Kaiju like Zilla, Mechagodzilla, and Methuselah.
Same
i wanna start collecting these neca figures, which one should i get first?
@@FinalZilla1 where would you reccomend i buy it from?
@@FinalZilla1 ive thought about it now, thinking of getting him!
Hope that neca can make godzilla figures again, they were really good and I enjoy playing with them.
The neca shin Godzilla figure looks like a bootleg.
I have the so same one and it looks nothing in comparison to his. I think he got the worst one bc mine it actually decent and nothing breaks
And I also saw this bootleg figure on eBay and it looks terrible
It is a bootleg
Tbh it’s better in real life
Darn I wish I watched this BEFORE I ordered atomic breath shin Godzilla
😆
Well your gonna have a Shin Godzilla with a permanent Open mouth cause there isn’t any alt face which i hate
The shin godzilla sucks
Me to
Painted mine with folkart neon purple paint, worked pretty well on it.
0:07 that part was funny when hr had the gauntlet and summoned the necas
I’ve got all of NECA’s Godzilla figures and still have a proud display of them. I might start getting Hiya’s Godzilla figures once funds are stable again.
Neca's Shin Godzilla looks like the drunk crippled Brother of the real Shin.
IMAO
And that’s saying something becuase shin Godzilla OS a drunk crippled version of Godzilla
@@starbirds2464 it is truer to the original then then Legendary
I must say what you said is PERFECT
Hehe yea
They're great for the price. SH MonsterArts is fine but my one big gripe is how hollow they feel compared to the NECA series.
I swear I. Saw a monster arts figure for 299$
I’m getting 2019 sh monster arts and thermo, and also I found them on Amazon for 24.57 normal version and 25.54 for thermo lol edit: I don’t care if it’s a boot leg it still looks very good
@@danlikezgaming4513 o
@@omegastudios5263 people sell them for 600 800
@@omegastudios5263 SHMA kiryu is $500
Gojis list
0:58 shodaigoji
3:48 kinggoji
4:48 mosugoji
5:50 84 goji
6:44 biogoji
7:59 spacegoji
9:34 gmk goji
10:39 kiryugoji
12:17 legendary godzilla 2014
13:00 shin goji
15:42 legendary godzilla 2019
Props for using the actual names instead of just the years
I miss the old time stamp
@@Jungleali ?
@@Monkeman28382 he didn’t.
@@Monkeman28382 wdym?
I actually have the big 2014 one! I could it for Christmas and I’ve some how lost the tail. I do hope Neca gets the license back and makes more of these BIG Neca Godzilla toys! Because they can scale with Lego very well
13:25 i died at shin godzilla's pose and your comment 😂😂😂
Same haha
13:26
TRUE! XD
15:04 Bro was so disappointed that he voice cracked 💀
cant even ROtate it properly without it falling of!
Can't even rŒtate it properly
Spinozilla Saurian: Can’t even ROtate it properly without it falling off! 15:04
I think you might have just gotten a bad shin godzilla figure. The one that I got has a good paint job and the joints are solid. Unfortunately, the ugly painting on the tail is a consistent issue. I do agree that the joints, especially on the tail, could have been better.
it is a boot leg, i have seen bootleg shins floating around for weeks.
did you delete all the comments saying shin was a bootleg because there were like 3 comments that had many likes but now they are gone
He’s gonna delete yours now🫡
I will also say for the Rodan, while I do prefer it to my monsterarts (do to paint mostly). My stand was bent too. Its the hole in the "explosion" effect......It was drilled at an angle. Some have it, others dont. Over time I've actually grown to like the slight bend as it gives off a more dynamic pose. I do think both Mothra and Rodan's stands should have had a ball joint at the base so this issue would never happen.
As for getting Rodan to be still on the stand. There are little creases that kind of "snap". Its more toward his chest. He will still move and wobble but it does seem to lock him in place. I noticed that its not the same for ever figure though and depending on if yours has more or less paint....it may not snap. I cut a small crease in with a knife and that seemed to fix my issue.
I dont have the monsterarts mothra but the wings on mine were very loose. I had to glue mine as well.
17:03 When I extra piece falls off countless times
I personally really love the Rodan, its one of the best in the line in my opinion.
I’m glad this stuff finds its way onto my fyp
17:03 I love the blast piece! Pointless? Definitely not, it give off such a unique effect, especially for display/photo purposes.
Agreed
Me 2
They were planning to make a Kiryu possibly and that’s why he has the scar and the mazer blast ver, but when they lost the license all plans were cancelled
Kiryu is my favorite Mecha godzilla
@@kunburi mecha godzilla is my favorite mecha godzilla
I've seen this like a million times and never gets old
Same
Same
Yep
Same
Same
Also, I believe the 1989 figure was based off the water suit used in the movie, hence the weird looking head.
"I review every Neca Godzilla"
1 Million people: Ok, Now you have my attention
Spinozilla has done a good job at this video
I am proud to be one of those million
same
Same
Lol shin looks bad and spino: and with out of the way let me tell you why this thing sucks" lol Lmao lol
FINALLY, someone else who likes Zilla on RUclips! These are pretty rare to find.
Tbh zilla was oneof my favorite before 2014 and shin godzilla
IKR Zilla is my favorite Kaiju but there are no decent Zilla toys. #WeWantZillaInTheMonsterverse
@@sabretoothtiger4314 #don'tcancelzilla
I also really liked zilla design
i had a similar origin to spino. the 1998 movie was the first one i saw, then there was the 2014, and then 2019, and then my interest just ascended from there.
imagine a zilla figure based on his animated counterpart with a green atomic breath piece
we need that
@Ryoichi Steven Recio Trendmasters made one back in the 90’s, and it’s actually how Zilla appeared in Final Wars. They just scanned a Zilla figure and animated it.
Yes
That would be cool
That would be so cool
20:41 literally has me rolling around from laughing 😂😅
for me 18:42 was hilarious xD
6:22 the NES Godzilla paint job makes it look like he's wearing diamond armor.
It kinda does
Minecraft Godzilla why does he not have a atomic breath but its lava
SO WE BACK IN THE MINE-
4:40 - *King Goji is now suffering PTSD flashbacks*.
“EAT YOUR DARN VEGETABLES GOD DAMN IT GODZILLA”
King goji: Nope
When Kong stuffs the tree...
@@HyperstrikerYT Ever sinse kong did that, godzilla never was the same.
@@cupcaketf223 in Godzilla vs Kong he stuffs the axe Godzilla had the tree then the axe...
8:26 Dude, the exact same thing happened to me when I got burning Godzilla! Everything was super stiff and head ended up popping off when I tried to move it. Ended up having to order a second figure and that too was also really stiff
Same but my head didn’t fall of only the tail
Could be worse, payed $50 AUD for mine at a convention when it first came out, on the last day of the convention. Right hand snapped out of box. Went to move the head, it also snapped... It was so tight I swear it was super glued in. Oh and the base of the tail, same issue. Hate that fkn figure
My figure is kinda stiff ngl
I finally found a person who likes Zilla. Side note I love Zilla he got me in the franchise.
I’m a Zilla fan too I love how durable and intelligent he is
@@calebschroniclesarcasm? if its not ur 100% right
@@GojiraEdits2027 I don’t even know what sar- ohhh
@@GojiraEdits2027 no it’s true I love zilla
I think he got unlucky 3 times with shin cuz even the old shin that ppl didn’t like looked pretty damm good
6:33 Red wasn’t actually from the game, he’s from the creepypasta which is the only reason many know the game exists
If you replay this part over and over again, It sounds like he is saying “The Bread.”
This part (6:33)
Just don’t see him at night. Overall that would be a good figure but put him somewhere you know where it is yet can’t see him to much. Like only where you can see his tail. Otherwise you might as well just go to the bathroom at night and see this thing as it stares into your soul.
Godzilla:I’m a lizard 🦎
Zilla: I’m a Iguana 🦎
Lies
Og and heisei: we be dinos🦖
Kong: im monke 🦍
They're similar but it's weird like lizard? What lizard tho?
mothra: IM A MOTH WHAT DO U EXPECT BY MY NAME
@@nigga_edits101 Well Godzillla Is A Iguana Also Because The Dorsals On My Plush.So Zilla Is A Igauna How Godzilla Is
For the SOSGoji, there's a metal version of Kiryu and SOS Kiryu released by Chogokin that is close in scale and works well for display purposes with the Neca figures. There's also a '74 and '75 MechaGodzilla available, and a Final Wars Gigan.
I managed to grab a few of the Neca Godzilla's when I heard they lost the licensing. I've only opened a couple, but I enjoy them a lot. Great Video.
I’m really glad this got me into your channel
Bc of this video, i went on Amazon amd bought the burning Godzilla. So im very excited to receive my first Neca Godzilla figure.
I'm not gonna lie, you would have got a better deal on ebay
This was a real nice video to relax to. I have the 1954 Godzilla and the regular "Goji V. Space-Goji" Godzilla figures myself at my local Walmart, and admittedly splurged about $30 on Amazon for the 2019 Legendary Godzilla because It looked really good (I'm a sucker for detail, and these figures have good-to-great detailing on them).
But yeah man, great video :)
why is your Godzilla figure is so messed up but when I buy my Godzilla it's literally perfect
I think the reason why BioGoji looks strange is because they probably based him off the suit that was used for water scene (3 suits were used for Godzilla in GvsB: Land suit, Water Suit, and the “no good” suit).
Yeah, the "no good" suit was only used for promotional material
Just wondering if Neca has made a 12 inch king ghidorah figure? Cose I’m trying to get one for my 2019 Godzilla figure
They stopped doing godzilla figures a while back, s.h figurarts has a ghidorah, but it is about 300$.
Yeah it’s expensive lol 💵
@tnertym we know that 😑
Get the sh one
@@GreatBossXL I shall take a look
Bruh great editing, very refreshing to see this type of editing on a godzilla related video
Thanks, M8!
@@SpinozillaSaurian np man
Shma started getting bad when Neca stopped and I think a lot of people didn’t realize that.
When you said that I am now starting to convince that shma is stealing the ideas of N.E.C.A
I was DYING laughing how he said “The prototype looks so much better!”
CUZ IT IS!
It is
Time stamp?
@@thelonelyduck2823 15:14
Why the heck is shin so bad so true that the prototype was even better
15:33 I was so excited to get Shin Godzilla, but when I got it out of the packaging, I had the same issue’s
P
Awesome looking Godzilla figure collection.
@GAVIN ORTEGA mines 1962
Mine is all
Burning Godzilla 2019
2014 Godzilla figures.
I love how he aggressively and calmly shoves the atomic breath peice to their mouth
SpinoZilla="Fun fact this is actually my first neca godzilla"
Me=Same Bro
Mine was 2019 burning godzilla
Mine was that GVB Godzilla toy but with bio’s acid breath thing on him.
Use gay gay
Godzilla 2019, 2003, 1954 and 2014 are my favorite NECA figures
Can't wait 'till I get my own money to start a collection of Godzilla figures 👍:)
Same but the hard thing is if i wanna get good ones it cost A LOTT
I’m getting my first S.H figure in a month or week
Already done it
@@Dawnald_twump good for you
@Lego Boba Fett I would have gotten Godzilla 2021 but, I don’t really like the paint in his mouth
I actually own a NECA Shin Godzilla figure. The one thing I hate about it the most is the head come's off VERY easy and one time I actually lost the head, but thank god I found it.
man I love NECA they make really great figures!
@Sonic Plush Adventures ye
The second suit is actually my favorite out of all Godzilla's
The 1955 one or the 1962 one ?
Its sad they discontinued the line of godzilla i wanted a neca version of kong and mecha g :(
There are Neca Kong figures just not the monsterverse versions
Yea I’m happy for the head sculpted except this 6:18, I’m gonna have nightmares
To think this video had 10k views like a month ago and now it's coming in around 1million which is insane
Jobby the hong : are you challenging me?
I think the atomic breath shin goji is way better that the normal version,i mean at least in mine I don't have any problem with the articulation and the face looks more accurate to the movie, it's a shame that the normal one doesn't look too good, but anyway, great review dude, your collection is awesome :D
I had no idea NECA lost the license for Godzilla. That's a shame. I was hoping for more like Godzilla 2000 and Final Wars.
i was wishing for zilla. I like this mutated iguana.
No Minus One version 😭
6:34 Red from the creepypasta? Idk if they would do that
Great review! Neca makes alot of good Godzilla figures, its good to see a video reviewing them all!
it's not all the Godzilla figures that NECA released.
I have that shin godzilla, but there's no holes in the feet. It also has an amazing paint job, and nothing is loose. I think you have a bootleg my guy
I used to have the 2014 6 inch figure. It eventually broke so my dad got me a new 2019 Neca figure and it was actually even better.
My Rodan’s finger broke off but I still kept it
You can just glue the finger back on
@@Laughosaur I lost it it’s tiny
14:43 I’m dying right now 🤣🤣🤣
6:32 That looks like a Minecraft diamond Godzilla lol.
Its Common
Very nice video, I love seeing people do retrospectives on figures like this. While Neca isn’t a nice and friendly company (quite slimy actually) I really enjoyed their Goji figures and I have plenty with my favorite being ‘54 Goji. I always hoped they’d get to my two favorites Final Goji and Megaro Goji are my top two. Also Millennium Goji but sadly no. I wish Neca could’ve continued this line but we can Thank Playmates for reportedly wanted sole distribution for Godzilla toys and to me they’re making nothing but crappy looking kids toys with horrible paint and no care. Neca was the middle ground between overpriced Monsterarts and nicely priced but hard to find (for me) Vinyls, now the middle ground has become the Bandai Vinyls and if you want good Goji figures then you better save the hell up. Now considering my favorite Godzilla is finally getting a figure... I better save up for Final Goji. Again, nice video I really enjoyed it and your opinions.
You: playmates figures are crappy looking
Playmates GvK line: no
Cool
Thet Naing Shein
They look flat and bland for me. No thanks
That’s nothing new for Playmates. They did the same thing with the TMNT license for years before Nickelodeon allowed other companies to make Turtles figures.
If they get a license, they do not like competition for their subpar figures.
17:45 “the figure itself is very fragile”
So…mothra herself
6:21 oh what the hell they added godzilla to minecraft ps heres a cookie
Lol nice joke
Yeah that Shin is clearly a bootleg that thing looks nothing like the one I have, the paint is much much better
Honestly, I want a zilla from neca as well
Yeah..
But some other people don’t.
@@gojirazillasaurus6341 Yeah, people be making fun of my friend Zilla
@@schadowni5404 umm i think i beated zilla....
So do i
The shin i got from Target was actually very very nice it had a little bit of trouble with the arm but that’s OK overall it was nicely painted and it came with its own atomic breath
I actually like the NECA Mothra figure, since it is translucent, kind of like in the movie (when one side of the wings are put under light the other side appears to glow) I thought that was cool and also though the wing design was closer to the movie then the SH-Monster arts
Thanks for giving us a review so we know what’s good and what’s not
I love it when spinozilla just slaps shin across LOL neca shin deserved it
I did that when I got a one that I can’t put the full tall on.
Well I HAVE A PERFECT ONE BOI
It’s not even the actual one, it’s a bootleg.
7:20 i think this head shape is still looks cool
For the rodan figure you don’t attach the stand to body you have to attach the stand to the legs
Oh hell yeah. Another Zilla fan? I really hope we get a figure of him in the future. While looked down on back in the day he's far more warmly welcomed now by fans. Heck, he's even in the comics as a sort of underdog kaiju.
6:16 hands down i dont even know how you could even call this a godzilla
Fun fact : the godzilla 1954 actually had a White atomic breath even if it was coulored this was also with the others in the japanese release
5:48 : me: *focas on the figures and not that diu song*
Who esle keeps rewatching this video because it’s SO GOOD
Bru so tru
yup
Me
no wonder he made shin godzilla a amusement park
Lol
Agreed
Your a mad city I used to play mad city
I have the same Godzilla 2019 figure but I painted it fire Godzilla
@@GoodVibes_Period i painted my thermo godzilla dorsal plates orange
The neca MV goji face is just terrifying im glad you have a good head sculpture