RAKK Haliya-M Review: An almost perfect mATX Case!

Поделиться
HTML-код
  • Опубликовано: 30 окт 2024

Комментарии • 177

  • @philsmart480
    @philsmart480 3 года назад +3

    More like this please! We need reviews on local products. Thank you so much

    • @JunkyardSummit
      @JunkyardSummit  3 года назад

      Still have a few cases from Rakk and Tecware that is currently in the works. :)

  • @snaperslab0218
    @snaperslab0218 3 года назад +2

    it includes 1 rear fan right?

  • @MikiSibs
    @MikiSibs 4 года назад +5

    wow i didnt expect the benchmarks
    this is actually a pretty good review
    mabuhay!

    • @JunkyardSummit
      @JunkyardSummit  4 года назад

      Thank you! :D Don't forget to sub and stay safe during this pandemic!

  • @agnasrico
    @agnasrico 3 года назад

    I don't get why they offset the radiator mount on front. It's also going to be a hassle to install the radiator on the bracket because you'll need a shorter screws for the radiator. You can just ditch the bracket and mount the radiator directly on the front, right?

  • @cmja09
    @cmja09 3 года назад +2

    Thanks. Muntik na ako bumili, di pala supported yung magkadikit na 140mm intake.

  • @jomarkpangan9362
    @jomarkpangan9362 3 года назад +1

    really good review man, straight to the point, with benchmarks, and no ass kissing :D

  • @alexcaparas4690
    @alexcaparas4690 4 года назад +4

    Now ko lang napansin na walang aRGB ang mATX hehe sa ATX Version kasi meron kaya may silbi yung LED Button ng case... anyway, Sa mga may gusto pala ng ATX Version ng Haliya much better to buy ATX Mobo kesa ITX kase mas maganda cable management pag sa ATX Mobo. I have the ATX Version at napansin ko sa ibang build na hindi bagay ang ITX Mobo sa ATX Haliya because of Cable Management pagdating sa baba ng Mobo.

  • @muskrat1910
    @muskrat1910 3 года назад

    is this compatible with the ROG STRIX Z390-I GAMING motherboard?

  • @speedburger5410
    @speedburger5410 3 года назад +1

    I just realized this uses the same chassis as the Darkflash DLM21 Mesh so they have the same issues regarding 140mm fans in front.

  • @crashbandicoot5636
    @crashbandicoot5636 4 года назад +2

    Hello, will a 140mm fan fit in the rear? Thanks!

  • @digiclick10
    @digiclick10 4 года назад +1

    front led button is a plus especially if you are using a fan hub to control the lights of your fans

    • @JunkyardSummit
      @JunkyardSummit  4 года назад +1

      Yep. Thanks for the info. actually I just noticed the use of it a few days after I did my review

  • @InstantShiningW
    @InstantShiningW 4 года назад +2

    great find, similar opinion about the side panel as well

  • @variable_0
    @variable_0 3 года назад

    Looking at the fan filters at the top and bottom, I assume the front and back are exhaust (not that I recommend it)

  • @pbert_
    @pbert_ 3 года назад

    i managed to fit a 280mm radiator in the front in pull configuration (h110i GT). used zip ties though

  • @kuyakim4499
    @kuyakim4499 4 года назад

    Hi @Junkyard Summit! I just want to ask if 170mm PSU will fit in this case? Hope you can reply. Thanks!

    • @JunkyardSummit
      @JunkyardSummit  4 года назад +1

      it will fit if you will remove the HDD cage on the bottom

  • @jaysonibanez1088
    @jaysonibanez1088 4 года назад

    Can we get some dust filter for the front of it,? and it will really RAKK.

  • @master_echelon8548
    @master_echelon8548 3 года назад

    Just curious bro, Kung tatanggalin mo yung mounting bracket sa front for the Radiator tas yung 3 Fans sa front ima.mount, pwd ba mag kasha yung 360mm AIO?

  • @chrisxcrozz5186
    @chrisxcrozz5186 4 года назад

    Hindi po sikip ang cable management sa ganito na case? and fit po ba ang dalawa hdd sa kanya drive bay with good cable management? nag dalawa ako isip nito or yung atx size. and matx po yung motherboard ko. Hindi naman ako nag problema sa aesthetic if atx size yung case and matx motherboard ko po.

  • @themiko1210
    @themiko1210 3 года назад

    ask ko lang kasi nagpalipat ako ng case to haliya M. paano buksan ung front mesh kasi mag dagdag ako ng fan

  • @ChrstnDpl29
    @ChrstnDpl29 4 года назад

    If I have only 4 fans. Whats the best fan management on this case? 2 intake 2 exhaust? Or 3 intake 1 exhaust?

    • @JunkyardSummit
      @JunkyardSummit  4 года назад

      3 intake and a single exhaust

    • @ChrstnDpl29
      @ChrstnDpl29 4 года назад

      @@JunkyardSummit Is it better than 2 intake and 2 exhaust?

  • @ensiel4738
    @ensiel4738 4 года назад

    What about the ATX version? Do you think it can fit a Noctua DH-15?

    • @JunkyardSummit
      @JunkyardSummit  4 года назад

      Not really sure. Best way to confirm is check the height of the d15 and compare it with thw haliya’s spec sheet

  • @dannycruz4385
    @dannycruz4385 3 года назад

    Hindi po ba talaga magnetic yung front panel ng matx rakk haliya?

  • @patvidz2088
    @patvidz2088 4 года назад

    Do you have an idea what max height a rakk anyag can accomodate? It says 155mm in the website but i would like an actual experienced user to comment.

    • @JunkyardSummit
      @JunkyardSummit  4 года назад

      sadly I dont have a Rakk Anyag with me so I cant answer that

  • @laurencea4422
    @laurencea4422 4 года назад

    Did you just use 2 120mm fans for the front in the final build?

  • @chrisxcrozz5186
    @chrisxcrozz5186 4 года назад

    Ok po ba yung atx version nito? Planning to change to this case with my current tecware nexus m. Dont know if the ATX version is worth the money or this is fine for the air flow.

  • @HenryAlvarez
    @HenryAlvarez 4 года назад

    This or the Tecware Alpha M? Need suggestions for best matx case around 2k budget. Thanks!

    • @JunkyardSummit
      @JunkyardSummit  4 года назад +1

      They are equally good so just choose which you think looks better

    • @HenryAlvarez
      @HenryAlvarez 4 года назад

      @@JunkyardSummit thanks!

  • @thegundamster1204
    @thegundamster1204 4 года назад

    that Non functional led button i think that will be connected to a led controller. most controllers have headers for this.
    also maybe the top of the psu shroud can support 2 120mm fan as intake for additional gpu air flow? had you tried it?

    • @JunkyardSummit
      @JunkyardSummit  4 года назад

      about the LED controller. was only able to figure it out a couple of weeks after I reviewed it. But thanks for the info btw. As for the 120mm fans on the psu shroud. I dont think it would make a significant difference given that we already got a good airflow from the front.

    • @thegundamster1204
      @thegundamster1204 4 года назад +1

      @@JunkyardSummit i see, thank you always for informative videos

    • @JunkyardSummit
      @JunkyardSummit  4 года назад

      Np! Stay tuned for a curvy unboxing soon! Also dont forget to subscribe. :)

  • @MrImpala444
    @MrImpala444 4 года назад

    Top notch review my man

  • @beamaybelarmino3437
    @beamaybelarmino3437 4 года назад

    Sir is it better to have tecware alpha mAtx TG rather than rakk haliya?

    • @JunkyardSummit
      @JunkyardSummit  4 года назад +1

      either should be fine. only concern is availability, get what is available. and expect more airflow with Haliya-M but more dust build up as compared to alpha-M.

    • @beamaybelarmino3437
      @beamaybelarmino3437 4 года назад +1

      @@JunkyardSummit thank you sir so much for always helping me. In my pc build

  • @tristanvalencia7835
    @tristanvalencia7835 3 года назад

    Sa may mga ganito po na case kaya po ba 3 na rakk maris pro para sa front fans?

  • @macked4654
    @macked4654 4 года назад

    Will NZXT KRAKEN X52 (240mm) fit on this one?

  • @radelsawal607
    @radelsawal607 4 года назад

    Magfit kaya boss yung push and pull orientation ng NXZT x52 dito?

  • @aljonrivera9059
    @aljonrivera9059 3 года назад

    Napansin ko lang may 2pin led connector na sobra sa front panel. San pwede ilagay to? Or no need na isaksak since wala naman led to?

    • @JunkyardSummit
      @JunkyardSummit  3 года назад

      The 2pin led connector is for rgb controller when you need to control the rgb via a switch

  • @んじょ-q9e
    @んじょ-q9e 3 года назад

    Can an atx psu be fitted inside this matx case?

  • @SonnyRagundiaz
    @SonnyRagundiaz 4 года назад +1

    Bro, kasya pa rin ba sa top kapag nilagyan ng fan yung radiator? 4:38

  • @charuzusan1842
    @charuzusan1842 4 года назад

    I saw another video showcasing the case, but the LED of the case turned on idk how

    • @charuzusan1842
      @charuzusan1842 4 года назад

      Oh wait nvm it was the Atx version

    • @JunkyardSummit
      @JunkyardSummit  4 года назад

      Yep. Its only available on the atx version. :)

  • @kimarizala5754
    @kimarizala5754 4 года назад

    mga ilan mm pa gap ng cpu cooler nyo sir sa side panel?

  • @jetfree730
    @jetfree730 3 года назад

    can you add 3 HDD ?

  • @chrisxcrozz5186
    @chrisxcrozz5186 3 года назад

    Ma fit po ang dalawang 3.5 hdd sa drive bay nang Rakk Haliya-M? or sa ATX version nang Haliya-M?

    • @JunkyardSummit
      @JunkyardSummit  3 года назад

      Sorry I dont have this case with me anymore but if I remember correctly, you are only limited to to one 3.5 inch hdd

    • @chrisxcrozz5186
      @chrisxcrozz5186 3 года назад

      @@JunkyardSummit ah ok. so only 1 3.5 hdd sa kanyang drive bay. so pwd po malagyan sa taas nang drivebay yung second hdd? hanap ako nang bago na case kase na basag ko yung tg front panel nang hawani flow. or hold ko pa rin yung current case ko?

    • @JunkyardSummit
      @JunkyardSummit  3 года назад

      Hmm. Prolly you can using the bottom mounting screws. Also do note that this only supports max of matx board as compared to the hawani which can support an atx mobo.
      As for your second question, I do feel only you can answer that. If you have spare budget for a new case, then why not change it but if you are saving for other conponents, then i’d suggest holding on to your hawani first. :)

  • @mattpascual5061
    @mattpascual5061 3 года назад

    how to use the led button on the front?

  • @koyamanger2537
    @koyamanger2537 4 года назад +1

    Maganda ba clearance?

  • @garongjogarong
    @garongjogarong 4 года назад

    can't seem to find this case anywhere nowadays, can you hook me up with a source?

    • @JunkyardSummit
      @JunkyardSummit  4 года назад

      Sorry but im not affiliated with any store so i cant help you with that

    • @alumhyr
      @alumhyr 4 года назад

      easy pc

  • @ZchryGold
    @ZchryGold 3 года назад

    SAAN PO PWEDE MAGAMIT YUNG NON-FUNTIONAL LED SA FRONT PANEL SIR??

    • @JunkyardSummit
      @JunkyardSummit  3 года назад +1

      you can plug it in your RGB controller to cycle the colors

  • @tupe1686
    @tupe1686 4 года назад

    Question sa AIO cpu cooling, assuming front mount yung AIO, yung radiator pwede ba ako mag 360mm? Gagawin ko yung three the 120mm fans, push config sa harap ng radiator. I saw some builds kase puro 240mm aio radiators lang puro naka pull config sa two 120mm fans.
    Nice video and more power!

    • @JunkyardSummit
      @JunkyardSummit  4 года назад

      It might fit with a couple mods or forcing. These are the things you need to consider:
      1. Removing the HDD Cage
      2. mounting the actual rad behind mounting frame while the fan would be in front
      3. the 360mm radiator might be obstructed by the front IO. Mounting the front fans are already a snug fit so the rad might be a problem as it is longer

  • @ericregi6930
    @ericregi6930 3 года назад

    Di parin po ba nagagamit ang led button as of now?

    • @JunkyardSummit
      @JunkyardSummit  3 года назад

      I figured out the purpose of the LED button a few days after this went live. The main purpose of the LED button is you can connect it on an RGB controller in that way you can use it as a switch to toggle your RGB lighting

  • @conyo985
    @conyo985 4 года назад +1

    This is better than the Darkflash DLM21. The darkflash case has no holes for the PSU shroud. You can even put 2 120mm fans on top of the PSU shroud for better GPU cooling. Best value case for the money!

  • @christiandaryltaruc487
    @christiandaryltaruc487 4 года назад

    Ano size nung gamit nyong front fans?

  • @carloleandrogonzales7777
    @carloleandrogonzales7777 4 года назад

    Hi, saan po kino-connect yung led button sa case, wire non para gumana thank you.

  • @jrperez2462
    @jrperez2462 4 года назад

    Hi! Ask lang po bakit may ground yung cp ko pag sinaksak ko sa usb ng case? Sa case po ba ito?

  • @adriandarwinnillo6428
    @adriandarwinnillo6428 4 года назад

    Anong cpu cooler yang nasa vid sir

  • @vilesparza438
    @vilesparza438 4 года назад

    that case have a free fan inside ?

  • @rlpkvncvllr8509
    @rlpkvncvllr8509 4 года назад

    Hi po at 4:46 yung radiator poba is kailangan pa sya kabitan ng fan sa mismong radiator or hindi na or yung front fans na ang bahala!??

    • @JunkyardSummit
      @JunkyardSummit  4 года назад

      yes. you need to mount fans directly through your radiator for an optimized cooling

  • @jangiljoshgregorio2366
    @jangiljoshgregorio2366 3 года назад

    Para saan po yung led button? ehh wala naman pong led sa front pa el ang matx ng rakk haliya

  • @xnpdoc4515
    @xnpdoc4515 4 года назад +1

    Kasya po ba ang w550 ng corsair psu ba dyan..

  • @jcmvergara
    @jcmvergara 4 года назад

    Kasya kaya sa harap sir ang 360mm aio?

  • @edrick_Music23
    @edrick_Music23 4 года назад

    may nakapag sabi na manipis daw po ung materials na ginamit sa case ?

    • @JunkyardSummit
      @JunkyardSummit  4 года назад +1

      Its decent at best. And of course materials going to be cheaper as this case is cheaper as compared to the top brands. You get what you pay for. :)

  • @miguelian1518
    @miguelian1518 4 года назад

    Ano pong fans gamit nyo

  • @jantolledo897
    @jantolledo897 3 года назад

    ask ko lang po sir, malakas po ba buga ng stock fans nya? thanks

    • @JunkyardSummit
      @JunkyardSummit  3 года назад

      Yeah. It blows air kinda good but it is really noisy. Around 2-3 standard fan noise combines

  • @anon1114
    @anon1114 4 года назад

    ask ko lang sir kung ano mas maganda haliya or sinaya?

    • @JunkyardSummit
      @JunkyardSummit  4 года назад +1

      Havent checked sinaya yet. But looks wise, i like the sinaya more

  • @jembemgaming41
    @jembemgaming41 4 года назад

    paano po maalis yung front cover? ayaw kasi ma pull out sakin. need ko sana linisin haha

    • @JunkyardSummit
      @JunkyardSummit  4 года назад

      Extra effort is needed especially for first time removal. :)

  • @epic6148
    @epic6148 4 года назад

    Hello po, ano po magagandang air cooler po na kasya sa ganyang case po

    • @JunkyardSummit
      @JunkyardSummit  4 года назад

      depending on your budget. Hyper 212 black is a nice high performing cooler

  • @kiryuwastaken
    @kiryuwastaken Год назад

    is this still available?

    • @JunkyardSummit
      @JunkyardSummit  Год назад +1

      Best to check with EasyPC as they carry the Rakk brand. :)

  • @ArlyBelgado
    @ArlyBelgado 4 года назад

    Kasya po ba kahit anong b450 mobo dito?
    Saka any gpu po kasya kaya?
    mATX VERSION PO

    • @harveyramirez7211
      @harveyramirez7211 4 года назад +1

      Kung gagamit ka ng mATX case, mATX din na mobo. Bale b450m bibilhin mo, maganda ang b450m pro4 ng asrock at b450m mortar

    • @ArlyBelgado
      @ArlyBelgado 4 года назад

      @@harveyramirez7211 okay na po nakabili nako b450 aorus M, micro-mobo sya swak sa mATX na case.

  • @yanyantaupa8863
    @yanyantaupa8863 4 года назад

    Hi, pwede po ba mag lagay ng 2 fans sa ilalim?

  • @penci1z-5
    @penci1z-5 3 года назад

    how do i remove front panel?

    • @JunkyardSummit
      @JunkyardSummit  3 года назад

      pull it from the bottom. a little bit of force is needed to pull it out

  • @ianchristianvillanueva9344
    @ianchristianvillanueva9344 4 года назад

    napagkasya po ba sa front yung dalawng 14cm fan? na mag kadikit???

    • @JunkyardSummit
      @JunkyardSummit  4 года назад

      Sadly I cant. That is one of the flaws of this case

    • @ianchristianvillanueva9344
      @ianchristianvillanueva9344 4 года назад

      @@JunkyardSummit so bali po yung nakabit nyo po sa front 12cm? mag kadikit po kasi

  • @ZeroTwo-cu7js
    @ZeroTwo-cu7js 4 года назад

    Kaya po ba dito atx mobo like aorus elite ?

    • @JunkyardSummit
      @JunkyardSummit  4 года назад

      nope. you need to get the Haliya one not the Haliya-M

  • @ZchryGold
    @ZchryGold 3 года назад

    Kasya ba. 3fan GPU??

  • @greenleafycabbage8715
    @greenleafycabbage8715 4 года назад +2

    Ganda yan pag all black ang laman ng pc

  • @albertvergara2426
    @albertvergara2426 4 года назад

    No filters in front po?

  • @charleslanceb.delarosa2255
    @charleslanceb.delarosa2255 3 года назад

    Nice got one for me but to have good temps you need a good mother board i got matx mortar max may gaming temps is 50-56 degree and gpu is 60 degree max load both are under volt but mother board vrm temp is like 50 need good mother board to to got good temps nice review love it we got similar build i got gamaxx 200s theres nothing diferrence on deep cool gammaxx gt and other gamaxx tower cooling just the fans and my gpu is gtx 1660 super asustuf 3xfan

  • @charlespoliquit2813
    @charlespoliquit2813 3 года назад

    kasya po ba 280mm rad sa top panel?

  • @hansbrentarroyo
    @hansbrentarroyo 4 года назад +1

    Hello po ano po yang cpu air cooler nyo po? Salamat

  • @henyourface
    @henyourface 3 года назад

    sold me on it! thanks!

  • @krisanlancepangilinan9004
    @krisanlancepangilinan9004 4 года назад

    Hi sir ask ko lang po kung kakasya ung aerocool strike x 500w na psu. Please pahelp po wahhaha newbie here, gusto ko po kasi palitan ng haliya ung current casing ko. And hindi po ba mahihirapan sa cable management since ung mga cable po nung akin is ung bilog ung may cover po na parang tela hahaha salamat po!

  • @hiimkxiv
    @hiimkxiv 3 года назад

    I just received my Rakk Haliya-M kanina via shopee. Guys if naghahanap kayo ng legit na review, ito na yung pinaka-accurate! No cap.
    Tama ka sir doon sa free fan na kasama nung case, ang ingay LOL

    • @JunkyardSummit
      @JunkyardSummit  3 года назад +1

      Thanks! Might want to check some front fan filter too over shoppee/lazada since your system could get a little bit dusty without it

    • @hiimkxiv
      @hiimkxiv 3 года назад

      @@JunkyardSummit Oo nga sir eh. Any shop suggestions? And kung anong haba ng filters?

    • @JunkyardSummit
      @JunkyardSummit  3 года назад

      I got a 360mm magnetic filter from lazada. :)

  • @dekngpasig
    @dekngpasig 4 года назад

    baka may alam kayo may mabibilhan ng side panel tg only matx nabasag yung sken eh thanks

    • @JunkyardSummit
      @JunkyardSummit  4 года назад

      unfortunately none. :(

    • @kindat6407
      @kindat6407 4 года назад +1

      Contact Rakk or subukan mo sa mga tindahan ng glass at aluminum kung kaya nila gayahin yang side panel.

    • @dekngpasig
      @dekngpasig 4 года назад

      @@kindat6407 acrylic glass n lang pinalit ko okay naman

  • @Matt-dp9lf
    @Matt-dp9lf 4 года назад

    Ask for help lang hehe, Pano tanggalin yung mesh panel sa harap?

    • @JunkyardSummit
      @JunkyardSummit  4 года назад +1

      You can pull the front panel easily if you you oull it using the gap below the panel itself

    • @Matt-dp9lf
      @Matt-dp9lf 4 года назад

      @@JunkyardSummit Thank you :)))

  • @zamhendrick
    @zamhendrick 4 года назад

    Feels like similar to Hardware Canucks yung style ng review

    • @JunkyardSummit
      @JunkyardSummit  4 года назад

      Thanks! That is a huge compliment on my part! :)

  • @chrysma5862
    @chrysma5862 4 года назад +1

    dami hoarder nito ngayon

  • @JanineA
    @JanineA 4 года назад +1

    Fancy case!

  • @victorabad8946
    @victorabad8946 3 года назад

    Help pano ba tanggalin front mesh nito 🥲

    • @JunkyardSummit
      @JunkyardSummit  3 года назад

      Use the gaps under the front panel and try to use abit of force when pulling it

    • @victorabad8946
      @victorabad8946 3 года назад

      @@JunkyardSummit ahh i see will try it now!

  • @noodlezdoodlez8175
    @noodlezdoodlez8175 4 года назад +5

    Rakk on! haha

  • @PunxTV123
    @PunxTV123 4 года назад

    5:14 kaya di pede kasi di mo tinaas ung sa taas na fan

    • @JunkyardSummit
      @JunkyardSummit  4 года назад

      I tried it already off cam. Its not really possible. :)

    • @joemelnanggan9750
      @joemelnanggan9750 4 года назад

      Sagad dpat sa taas ung fan. Kasya tatlong 120mm jan na fan

    • @jaysonibanez1088
      @jaysonibanez1088 4 года назад

      @@joemelnanggan9750 He used 140mm fans. Thats why Its not possible for him

  • @markedra6322
    @markedra6322 4 года назад

    parang ang taas nung cpu temps,

    • @JunkyardSummit
      @JunkyardSummit  4 года назад

      That is an overclocked 2600 hence the higher temp. Cpu vcore is around 1.325v in BIOS

  • @lester_r723
    @lester_r723 4 года назад +1

    Sana mag papa giveaway ka po kahit mga pc parts lang na hindi mo na ginagamit :)

  • @kindat6407
    @kindat6407 4 года назад

    0:56 They have one in Malaysia almost the same design different brand name. ruclips.net/video/-v30rq6-gmU/видео.html

  • @marvincenteno3951
    @marvincenteno3951 4 года назад

    lagi naman out of stock

    • @JunkyardSummit
      @JunkyardSummit  4 года назад

      Rakk seems have issues on their shipment since the start of the pandemic

  • @rjmadclown2141
    @rjmadclown2141 4 года назад

    System unit not cpu

    • @JunkyardSummit
      @JunkyardSummit  4 года назад +1

      Yep. I do know the difference between those two. if you mean by the CPU cases, then yeah my bad, should be computer cases or desktop casing.

    • @rjmadclown2141
      @rjmadclown2141 4 года назад

      @@JunkyardSummit 👍👍 no hate

  • @Enoughyoufool
    @Enoughyoufool 3 года назад

    Kala ko indiano yung nag rereview

  • @RedMushroom23
    @RedMushroom23 3 года назад

    dami mong kuda na non-sense

  • @zainon4983
    @zainon4983 4 года назад +1

    totoo ba na d magnetic yung front ng matx ver?