Suspension Joints Explained

What suspension joint do you need? Today, we go over the three major types of suspension joints that Barnes 4WD offers. We go over generally what they were made for and how they work. Most importantly, we go over what we at Barnes 4WD recommend for different rigs and suspensions. Whether you're building a Toyota, Jeep, or Land Rover, we've got you covered.
Below are the links to each of the different suspension joints.
Poly Joint:
www.barnes4wd.com/Forged-Chro...
Enduro Joint:
www.barnes4wd.com/Enduro-Join...
Heim Joint:
www.barnes4wd.com/Heat-Treate...

[@JeepTeriyaki]

My TJ has johnny joints aka enduro joint on the long arms(control arms) 5.5 inch sus lift and Heim joints on my steering arms. Handles awesome on and off road! Good video!

[@NightWrencher]

Very Informative 👍

[@barnes4wd]

Thanks!

[@jakemitchell3535]

Running your enduro joints on my custom 3 link xj. Love them! Best value in a joint.

[@barnes4wd]

awesome to hear!

[@tthams73]

I run Heim tie rod ends on my 240z. They work great! They do not transfer vibrations to the body as often rumored and the ride is just as smooth as standard tie rods. However, the steering is much smoother and responsive.

[@scottadvevture2022]

thanks for all the info have a great year

[@boondocksoverlandandoutdoors]

Looking to go y’all’s route on the 3link kit.. I plan on slapping it on my first Gen Tundra! Already have the 05+ SD 60 axle pretty hyped about this build! Thanks for the great vid, sold me with y’all’s enduro type joint. Most likely will be giving y’all a call this week! 🤙🏽

[@BlackAndBlueGarage]

Just ordered a bunch of stuff with Enduro joints. Can't wait to get it and open it all up. You guys mind if I drop your name and link in a video?

[@barnes4wd]

Go for it!

[@BlackAndBlueGarage]

@@barnes4wd this just made my day 😁

[@nvrqit9361]

How you grade the enduro joints ? I got a bunch of the and the regular ones
The regular ones as a fitting that I was able to used
The enduro ones I couldn’t used the same greaser

[@woof3598]

when you grease a rebuildable joint should yuo pump grease untill it starts coming out the sides or just give it a couple of pumps when you first install them ?

[@barnes4wd]

Around two or three good pumps is plenty 👍🏻

[@genoory5090]

What size & length is the heim joint your holding and the link to purchase it?

[@barnes4wd]

That is an 1 1/4” Magnum Heim Joint. Here is the link to our magnum Heim joints. barnes4wd.com/collections/magnum-series-heims