helped me directly,i was stuck with the spring,just twist it with the case on top while closing all made it work,a new key would cost between. 80-100€,thanks
£8 and 10 minutes. Thanks for the help. Sadly I don't ha e the logo on the back but at least it works just fine and doesn't pull down the windows constantly thinking I'm pressing the button.
Great video ! That was really helpful Could you please tell me what kind of glue you used to glue the Opel logo onto the new case ? I thought of super glue, but I'm afraid using it will prevent me from opening the case ever again !
€ 1,68 25%OFF | YIQIXIN For Opel Vauxhall Insignia Astra J Zafira C Mokka For Chevrolet Cruze Epica Lova Camaro Impala Car Flip Folding Key Case a.aliexpress.com/_mMDT2Xk
€ 1,64 30%OFF | XNRKEY For Opel Vauxhall Insignia Astra J Zafira C Mokka For Chevrolet Cruze Epica Lova Camaro Impala Car Flip Folding Key Case a.aliexpress.com/_mNQJeIE
Shouldn't you have removed the screw under the logo first? Wouldn't the second piece come out easier? And what fluid did you use to clean the circuit? Thank you!
The original doesn't have screws, they are glued/vulcanised. To clean I use isopropyl alcohol or a especific spray to clean electric components that are sold in especific houses.
It was basically impossible to open my only FOB, had a feeling that glue must have been used. To top it up, the replacement FOB had a bit narrow "key hole" for the metal key, so had to hammer old key into the new one. For most people, paying EUR 100 for a new key seems worth the trouble. This is for die heard DIY people. Easier to repair an iPhone screen :-)
I put a screw driver to open it like in the video and somehow scratched the circuit board damaging a component I still haven't find. Now the the safety feature doesn't let me start the car tho I can still unlock it. Had to start using my spare key... Be careful opening the case, it's not a simple task.
Great video and it was very fiddly to do the old key fob was destroyed whilst doing it, I swear the last person must of glued it together.
Superb, clear video. I changed my Insignia's key fob in five minutes following this.
Dzięki bardzo za te wskazówki - brill job mate !
Cheers for the vid! I'm still trying to open my old fob. Hammer next lol
helped me directly,i was stuck with the spring,just twist it with the case on top while closing all made it work,a new key would cost between. 80-100€,thanks
Thanks mate. With your guide it took me 10min to change it :)
Hi, thanks for the video, but I have a question.
after assembling the new cover is it necessary to reprogram the key or does it not lose its memory?
Excelente vídeo, obrigado👌
Beste Anleitung ever einmal angesehen auf alle Tricks geachtet hat zu 100 % funktioniert danke
Awesome, just changed it myself using this video, thank you
Useful tutorial, man!
Awesome. Thanks!
£8 and 10 minutes. Thanks for the help. Sadly I don't ha e the logo on the back but at least it works just fine and doesn't pull down the windows constantly thinking I'm pressing the button.
Great video ! That was really helpful
Could you please tell me what kind of glue you used to glue the Opel logo onto the new case ? I thought of super glue, but I'm afraid using it will prevent me from opening the case ever again !
Normal superglue, but spread carefully...
What’s the pin tool kit called please
I just can't open original key,glue is so strong?Any advice please?I tried this way..nothing.
Use a strong plier.
Where you got the logo insert from?? All I can find on the bay is round button style logo emblem.
AliExpress
@@carserviceportugal can you post a link? Or suggest a search term, I tried searching, and could only find button style round emblems.
€ 1,68 25%OFF | YIQIXIN For Opel Vauxhall Insignia Astra J Zafira C Mokka For Chevrolet Cruze Epica Lova Camaro Impala Car Flip Folding Key Case
a.aliexpress.com/_mMDT2Xk
€ 1,64 30%OFF | XNRKEY For Opel Vauxhall Insignia Astra J Zafira C Mokka For Chevrolet Cruze Epica Lova Camaro Impala Car Flip Folding Key Case
a.aliexpress.com/_mNQJeIE
How do you remove the Opel emblem from your old key?
Didn't took the emblem, the emblem is new and came with the new key.
Is no programing needed ?
great just need to buy the tools to successfully replace my key.
Shouldn't you have removed the screw under the logo first? Wouldn't the second piece come out easier?
And what fluid did you use to clean the circuit? Thank you!
The original doesn't have screws, they are glued/vulcanised. To clean I use isopropyl alcohol or a especific spray to clean electric components that are sold in especific houses.
@@carserviceportugal Thank you!
Thank you very much, easy to follow and complete 👌🏻
Its problematic to open original key this way u show us i worry i can damaged somthing inside key....
Thanks sir
Near impossible without damaging the circuit. My one is glued together. The circuit is very tight to the edges and thus got damaged.
Otimo video. Só não consegui pegar o jeito da mola. Eu aperto o botão e não sobe a chave, mas ao contrário fecha na boa 😅
Precisa de mais uma volta ou apertou demasiado o parafuso...
Eu dei as duas voltas, a lâmina não sobe ao apertar o botão, mas desce quando eu perto o botão! 😅 Ou seja o mecanismo está ao contrário 😅
6:20
@@oliviasantos3675 rodou ao contrário, tem de ser no sentido contrário aos ponteiros do relógio
Boa tarde. Qual o nome da ferramenta que utiliza para calibrar a chave?
Boa noite.
Não percebi qual a ferramenta...indique o minuto.
Where did you get that little logo from?
AliExpress
It was basically impossible to open my only FOB, had a feeling that glue must have been used. To top it up, the replacement FOB had a bit narrow "key hole" for the metal key, so had to hammer old key into the new one. For most people, paying EUR 100 for a new key seems worth the trouble. This is for die heard DIY people. Easier to repair an iPhone screen :-)
Is there no separate immobiliser or anything?
No.
God bless you
Ottimo video il telecomando va letteralmente distrutto.... è incollato.
Confermato? Perché io il mio non riesco ad aprirlo in nessun modo
Ho sostituito il guscio della chiave uguale a questa del video. Adesso la macchina non va in moto. Sai dirmi il perche?
Probably you knock the transponder that is welded in the corner...
@@carserviceportugal allora se cosi secondo te qual’è la soluzione?
Bom video. Obrigado.
I cant get it to open
Sometimes is not easy. But put a larger screwdriver in the holes beside the blade and swing, paciently you will ear a crack. See the video, I show it.
Car Service Portugal OK, thank you.
Or put pliers in and pull apart hard.
I put a screw driver to open it like in the video and somehow scratched the circuit board damaging a component I still haven't find. Now the the safety feature doesn't let me start the car tho I can still unlock it. Had to start using my spare key... Be careful opening the case, it's not a simple task.
Be very careful mine was literally glued shut, ended up damaging the green motherboard and had to completely replace the keys £200
to complicate for doing at home
False info. Not fob replace. But fob cover replace
stupid opel, I hate this key
Skipped the actual hard part
Tried this and ended up breaking everything. Don't do it.
Yeah but you're just crap
Next time, make a video when you know exactly how to open the key correctly!
Why don't you do it, if you have a better way? We will appreciate. Thank you
There is no better way its glued so much stupid opel engineers…
It's vulcanised. But the idea is not to be easy, it's made for buying a new key.