Touch Screen Replacement for OEM/ODM 10.1"/9.6" MTK 3G/4G Phablet - Repair Guide

Digitizer Touch Screen Replacement: goo.gl/nSh98M
Repair Guide: Disassembly OEM/ODM 10.1"/9.6" MTK 3G/4G Phablet Android Tablet PC for Replacing Touch Screen Digitizer Glass Panel, LCD display AND Battery etc...
How to find the correct touch screen:
Step 1: Check the dimension and camera hole position.
Step 2: Check the type of ribbon cable.
Step 3: Check the number of channels (X axis and Y axis).
Find and remove the screws, if no screws, skip this step.
Take the back cover apart.
Note: After the back cover is separated, watch out for the speaker on the rear panel, power button and volume button, don't lost.
Remove the cracked touch screen.
Remove touch screen from the plastic housing, using the pry tool to open carefully.
Note: Carefully wedge the pry tool into the easiest entry point you can find between the screen and the frame.
X axis: 26 Pins, Y axis: 14 Pins; Type-Y: Parallel Flex Cable
Install the new touch screen
Test before installing.
Work Perfectly.
Wholesale Repair Parts from Actablet.com, upto 70% off.
Reassemble your device.
Thank you!