OBS Ford Restoration Part 6: Fixing 3 Common Problems
HTML-код
- Опубликовано: 28 авг 2024
- The interior is finally finished! In this video I fix three common problems that plague the OBS Fords. All of these problems are fairly simple to fix and don't require a whole lot of time. Dash pads are getting fairly expensive nowadays, but everything else only cost a couple of dollars. I do have to give credit where credit is due however, Jon Fox over at The Fox Shop came up with the idea of using a hurricane strap to fix the sagging dash. It was a great idea, and was the best fix I had come across, so I decided to go with it. Thanks Jon!
Fixing the sagging dash: 01:15
Dash pad replacement: 04:50
Door handle reinforcement plate: 07:34
Email me at: ydocproductions777@gmail.com
If you would like to see more great content check out these channels below!
Check out Zane’s channel HODGE_PODGE_DODGE_GARAGE here:
/ @hodgepodgedodgegarage
Check out James’s channel 3rd Coast OBS here:
/ @3rdcoastobs467
Check out Jason’s channel Sparks Fire and Baling Wire here:
/ @sparksfireandbalingwi...
Listen ad-free with RUclips Premium
Song
Feel Good
Artist
Syn Cole
Album
Feel Good
Licensed to RUclips by
AEI (on behalf of NCS); LatinAutor - SonyATV, Featherstone Music (publishing), CMRRA, Abramus Digital, UNIAO BRASILEIRA DE EDITORAS DE MUSICA - UBEM, Sony ATV Publishing, Warner Chappell, LatinAutor - UMPG, UMPI, LatinAutor, ASCAP, and 22 Music Rights Societies
I’ve been driving around with a shaky dash for years thinking there was nothing I could do about it!! Thanks for this video 👍🏼
Glad the video could help out man! Welcome to the channel😀👍
Thank you for making your own repair brackets. I did this exact same thing 15+ years ago ... long before these OBS parts sellers were a thing. I'm happy that you're not a typical OBS RUclipsr, buying their overpriced products and parroting how great they are. The OBS community has a lot of great people, but sadly it has a lot of money grubbin' opportunists taking advantage of people new to the OBS world.
Thanks for the kind words John I appreciate that. Yes the aftermarket for these trucks has become a huge deal nowadays some products are great others not so much🤣! Take care
Yea u snapped doing your own thing saving money for the working man
Hey Cody, you're doing a great job with your how-to's! I'm 70, owned and driven a lot of Fords over the years, and your approach to keeping your great OBS Ford on the road is smart, realistic and the way to do it. It's how I've kept my 1996 F150 Eddie Bauer looking and running great. Thanks for what you are doing. All the best to you!
Thanks so much for the kind words Bob I really appreciate it. So happy you like the series of videos I do on these OBS Fords. The Eddie Bauer trim you have is one of the coolest OBS Fords out there, and I hope it lasts you many years to come. Take care😀👍
Just bought a 94 150 and I'm using yours and a few other channels to really understand and mimic my restore process
That’s great to hear! These trucks are pretty simple. With a few tips and tricks they can last a very long time. Good luck with your restoration project and thanks for watching😀👍
I did the hurricane strap repair today, worked perfectly. I was done in 30 minutes, thank you.
That’s great to hear! Glad you got some use out of the video! Thanks for watching and welcome to the channel😀👍
Awesome step by step video! You are very creative in your solutions. I just picked up a 1994 Ford F-150 for my son and it needs quite a lot of interior TLC to get in decent looking shape. The dashpad and doorpanels are the number 1 & 2 issues I'm going to resolve first.
Thank you very much for the kind words. Sounds like a truck with great potential. Parts can sometimes be hard to find sometimes but restoring the interior of these vehicles really is worth the time and effort😀👍
Just found you and love your common sense fix’s l will go back and check out what else you have on Obs fords
Thanks a lot man I appreciate it! If you’re looking for OBS Ford videos then you came to the right place👍
Did the same thing with my 93. I had a factory repair kit for this repair and mocked mine off that. Used the same bracket an all. Works like a charm. Good repair!
Thanks for the kind words! I’m glad you found the video helpful. I really enjoy working on these old Fords because they’re so easy to work on.
I like the way you fix things...my OCD would of painted the bracket black for the dash repair. Good job!
Thank you. It’s a cheap fix, but a lot easier than having to replace the whole dash🤣.
Nice job. For those little cracks in the abs plastic of the dashboard, a little acetone goes a long way. The repair will be invisible because you not adding any new material just reflowing the abs a little. When you overlay metal and rivet or bolt it together, try applying body adhesive or simply some metal impregnated epoxy between the layers. It keeps out moisture and distributes the load more evenly for a solid feel for years to come.
Thank you so much for those great tips! That’s really fantastic advice. I never thought of adding body adhesive before. Thanks so much for watching!😀👍
great videos Cody keep them coming...
Thanks man I appreciate it! 😀👍
Dude thank you for making your own brace. I was going to buy one online but now I’ll just head to Home Depot and make one my self
Your very welcome! That’s why I make these videos, to show you don’t have to spend big bucks every time to do a quality job👍. Thanks for watching and hope it goes well with your truck!👍
Great job Cody! 😀 You made a nice patch for that handle. That truck is looking soo much better after every video! 🙂 I *love* to see that ratchet getting put to good use. Looking forward to the next video my friend ❤ Take care and be safe out there 🔧
Thanks Zane! Glad you liked it! It’s been a whole lot of fun working on it so far and seeing the transformation. It’s not perfect by any means, but has definitely come a LONG way. I gotta tell ya that ratchet works fantastic! It really was a great gift man, thanks again for it! Take care man👋😀!
Man, You're gonna have a Very Nice truck when you're done with this and ALL you're do'in with it. I've got a 1994 Step Side Lighting it Never been out in the weather it sits in my shop mostly, very-very Low Mileage. It looks just like it did in '94. I also now have an 1987 Ford F-250 that is fairly nice too. I'm work'n on the Tranny its not in the best shape. I seen your video on the Fire Extinguishers and I Subed & Liked your video's. Keep Up your Great Work there, Son👍🏽👌🏽👏🏽
Thank you sir! It’s definitely been a work in progress, but I’ve had a lot of fun so far. That’s amazing you’ve got a pristine Lightening! First gen Lightnings are becoming more rare by the day, and the fact it’s got low miles makes it that much cooler.
Since you’ve enjoyed my OBS restoration so far I’d highly recommend you check out my RUclips friend “3rd Coast OBS” down in Texas who’s actually restoring a first gen Lightning on his channel. You can find him down in the description of all my videos. Thanks again for the kind words, and support I sure do appreciate it.😀👍
BTW that’s interesting about what you said about the freeze plugs on the top of the transmission. I never thought of that before. I have always heard they were holes left from the casting, and Ford just put cheap plugs to seal them up. However that being said if they’re there to release pressure that’s gonna be a problem...🤣
Ford NEVER made a step side 94 lightning. So, nice try.
Love the door handle fix ill keep that in mind if I ever have problems
Thank you! I’m glad you liked it!😀👍
Great tips on those repairs. It has to be satisfying to get those little items corrected. When you get them all done how about a walk around showing all the improvements? 🤧
It’s feels great to have it all completed! It took a couple of months, but it was well worth it. I definitely will do a good walk around when it’s all complete😀👍!
Super pumped I came across your channel. Super detailed with what and how you do things and you tell it how it is with no BS. Keep it up man. 🤙
Thanks man, I appreciate the kind words! I’m glad you like the videos. Welcome to the channel!🤙
Great work on the cheap. Excellent tutorial my friend.
Thank you! Glad you enjoyed it😀👍!
That plate u made for the door was spot on those nuts behind the dash probably had lock tight on the that's why u got undo them all the way. Good job mate dash cleaned up real nice.
Thanks man! Im really happy with how that plate worked out. Not to mention I saved a little bit of cash by doing it myself. You’re probably right about those dash nuts cause they were pretty stubborn, but definitely worth it. Thanks for watching😀👍
This was SO satisfying to watch and you had me at "93" (the same year as my Bronco XLT)...new subscriber!
Thanks so much I appreciate it! The 92-97 Broncos are so cool, and my favorite generation. I hope you plan on keeping it for some time because they’re only going up in value
@@ydocproductions5593 I've owned her since 1999 and never considered truly selling her, no matter what snide comments people made. My reply to their, "why don't you get a NEW car?!" comments was always, "Because, I can live in her if I had to!". Who knew that all these decades later, I'd be setting her interior up for mobile vacationing/camping with my big dog?!...and, I DIY as much as possible because it's all about learning (saving money, too). Once again, thanks so much Cody, for making and uploading your videos. May God Bless You and Yours.
@@TinaICXCNIKA That sounds like an incredibly fun build! I’m in the same boat as you, I’ve learned so much working on these trucks and the money saved doing it myself has been in the thousands instead of bringing it to shop mechanics. Thanks again for the kind words it’s truly appreciated, God bless👍
Never seen a xlt with manual windows but very cool truck dude the restoration was very clean and well done
Thank you very much! I’m glad you enjoyed it! Maybe the manual windows was an option for the xlt package?
Not bad at all! If you need to lubricate door hinges, handles or other spring/lock mechanisms, give fluid film a try. It's pretty reasonable in an aerosol can. It can be messy though, so watch where you spray it!
Thanks Wesley! That’s a good tip I’ll have to give it a try! It never ceases to amaze me how well just adding a little bit of lubricant to these old door locks, buttons, and handles can make such a difference. Thanks for the support as always😀👍!
@@ydocproductions5593 not a problem! You're on your way to being a good mechanic. Just keep doing the research & keep up the good work!
Wish I woulda seen this when I was trying to remove a dash pad at Pick n Pull. 😆 I trashed that dash without ever getting it off. 😢
Hahaha. Thanks a shame, but at least ya know now🤣
Thanks for the video
Thanks for watching😀👍
Great budget fixes! Thanks for the ideas...
Glad you found it helpful! Thanks for watching😀👍!
Very informative! Thanks for sharing buddy! 👍👍👍👍🇺🇸🇺🇸🇺🇸🇺🇸🙏🙏🙏🙏
Thanks for watching!😀👍
S tier content man! Keep it up cuz I need all the help I can get with fixing up my 95 lol
That’s good to hear thanks for the kind words! Just got a new project truck for the channel so expect some good videos coming your way soon😀👍
Hey man just came across you channel, my dash rattles so I'm gonna do the same with that piece of metal. Btw your intro looks like it was taken in selah! If so I live there you lol
I’m glad you enjoy the channel! I’d highly recommend giving the hurricane strap a try to fix your rattling dash the only other option I know of would be to replace the ENTIRE DASH. I don’t tell people where I live over the internet but I do live in central Washington👍. Thanks for watching man and merry Christmas!🎄
Well I know how to fix my door handles when they break.
Exactly! A cheap and easy fix😀👍! Thanks for watching man!
@Dario Kayden
Ok but wouldn't that be like, illegal or something because it wasn't authorized?
I took the entire dash out of my truck so I could clean 30 years of dust and grime out from behind the dash. You’d be surprised how nasty it gets over a thirty year period. Having the dash out also made replacing the windshield super easy.
I haven’t been brave enough to take a dash out of a vehicle yet🤣. Im sure there’s tons of junk that collects over time. Props to you for being willing to remove it.
I want to see more on your truck
I’m k glad to hear it! I have plenty of other videos on this particular restoration. Thanks for watching😀👍
Those dash pads can be over layed with vinyl upholstery material and 3m spray adhesive.
I’ve always wanted to try that! As long as the material was a close match to the original I think it would be a great solution👍
I’ll take the og dash gives it character and let’s you know it’s made to be used 😂😂😂😂 na but fr really good video I have a similar 95 blue 2wd 8 and love driving the thing daily and I’ve never been a truck guy
Haha I guess that’s true🤣! They truly are great trucks if you keep up on maintenance. Sounds like yours is pretty cool!😀👍
You'll find that CA glues are not well formulated to work on plastics. Stuff might stick a little, but fails easily. Even a lot of two part epoxies don't bond well with plastics. There are some good adhesives for plastic (polymers), finding a universal one is a challenge. Nice repair with the hurricane clip.
Thanks! I’m pretty happy with it. Can’t beat a .50 cent fix😀👍
I fixed a dash in a square body chevy once with bondo, ducktape, and black spray paint. Wasn't the best looking but it sure looks better. I also got a new radio for my dodge.
Sounds like a good fix! Ya that cracked dash with the exposed yellow foam really looks bad in my opinion. Glad I swapped it out! That’s cool that you got a new radio for the truck. Way more capable then the stock 90s radios
@@ydocproductions5593 my truck had a aftermarket pioneer radio in it. I got tired of not having a cd player. So I went and bought a radio with bluetooth,aux,and a cd player. And it comes with hands free something (can't think of the name off the top of my head)
@@oldcroneysgarage9739 Right on! Sounds like a solid upgrade!
that's some purty work!
Thank you! I’m glad you like it!😀👍
@@ydocproductions5593 Just bought a '93 sb 4wd f150. Pertinent content!
@@thedudegrowsfood284 That’s so cool! Those sort bed trucks are getting harder to find! I hope it serves you well
@@ydocproductions5593 Thanks!
Keep the videos coming🙌
Yes sir! Thanks for watching and welcome to the channel😀👍!
nice!
Thank you!
awesome! great job with the video!
Thanks Ad! This truck is definitely a work in progress!😀👍
Good stuff man
Thanks a lot man! Welcome to the channel!
Wish I would’ve seen this earlier, I’m so late… on mine I hammered the ripped metal for the handle back to where it’s supposed to be and JB welded it back in place
Haha bummer🤣! JB Weld is pretty strong though. That being said I’m really happy with the reinforcement plate in my Powerstroke currently. Works just like the day it was made. Thanks for watching😀👍
@@ydocproductions5593 currently also workin on a 93 f-150 extra cab that is also my daily all new brakes and hardware and lines.
@@williamwatkins2538 Very cool! I like the extended cab trucks more than the single cabs personally. Sounds like you plan on keeping it for a long time hope it serves you well👍
@@ydocproductions5593 plan is to try to restore it maybe throw a 460 in it will be the kids first truck he can drive to school in.
@@williamwatkins2538 that awesome! Sounds like when you’re done with it it’ll go 0-60 in 5 seconds!
I’m amazed how broken my dash was when I pulled it apart a couple days ago, there was 1-2 screws holding it in, the rest were broken.
Wow, sounds like the trucks’ interior was pretty worn out!
@@ydocproductions5593 it sure was. I took most of the interior out, changed to manual windows and door locks and repaired the dash using super glue, washers and hot glue.
If u mounted the new plate on the back side it would be stronger
That’s great advice thank you😀👍
Love the low buck repairs Cody! How did you get lucky enough to find that dash pad? I don't think you would find one around these parts.
Thanks Jason😀👍! I ended up finding one at a junkyard out of town. The guy wanted $50 for it, and I managed to talk him down to $45 so I can’t complain. These dash pads are getting harder and harder to find. If you go on eBay they want $300 for one which is crazy!
The cable Being stretched is the real problem on the door handles
That’s a good point
Do you remember where you bought the bracket for the dash i cant find it
I picked mine up at Home Depot for .50c👍
Ok thanks
Will you post a link to hurricane brackets?
Sure here’s a link to Home Depot:
www.homedepot.com/p/Simpson-Strong-Tie-H2-5A-18-Gauge-ZMAX-Galvanized-Hurricane-Tie-H2-5AZ/100275721
Do you know where I could find replacement clips for the dash trim for a '93 F250 XLT?
I would try your local auto parts store first. However if you can’t find them anywhere I would also recommend going to a local salvage yard where you can pull the parts you need from another truck.👍
Whered you get the door panel screws located at 12:49
Hi Isaac, those are just regular wood type screws that I had lying around.👍
Great video! What type is steel sheet is that? Is there a gauge to it? Where can I get it?
I believe I ended up using 18ga sheet metal. However you could also use 16ga if you wanted. Any hardware store would have it for pretty cheap. Thanks for watching man and welcome to the channel😀👍!
@@ydocproductions5593 Thank you for the quick reply. Great work.
If you could , would you make me one of your door supports for my 95 f150 drivers side door . I would pay you for all shipping & parts , your time .
Hi Osmund, I wouldn’t mind making one, but I have a fellow RUclips friend (Joel at Blowing Diesel) who already makes them and sells them on his website. He does fantastic work and their even higher quality than what you saw in my video. I left a link below to his website where you can buy one. All I ask is you tell him Cody at YDOC Productions sent ya.
blowingdiesel.com/product/door-handle-re-eforcements/
THANKS CODY 👊👊