How to make a mini pyrography tool

[@rokokoko123]

Apply ohm's law to calculate the current through the tool. Current equals voltage divided by resistance of the tool. So if voltage is 5v and resistance is 2 ohms the current is 2,5 amps. Also the resistance gets exponentially higher with the increase in temperature(a good thing, less stress on power supply). Great videos but make one where you explain the basics. In my opinion one shouldn't be doing anything around electronics without a decent multimeter and basic knowledge of ohm's and kirchhoff's laws.

[@NitroGuyJH]

Awesome video! Personally I would leave a very small gap between the two contact points to break the circuit once the pressure is relieved. And in turn reapplying pressure to close the circuit once you need to use it again, being that a tiny amount of pressure is used to affect fibrous material anyways.

[@carlhardric8606]

As a woodworker, I have always wanted a way to burn my mark on my work. This could be just the trick I have been looking for.

[@ScrapwoodCity]

Cool project!

[@katrinasheen3406]

Thank you so much for your vid on making this mini pyrography pen. You made it look so simple, that even I could do it !
I paid £25 for one on eBay. The guy mucked me around so much with excuses that the time had run out to send it back. I could name the guys user name, but I’d probably be in the shit ! So now I’ll make my own one thanks to you pet. 💕💕

[@dananelson8781]

Roman!! Hats off to you! This impressed me with how good it worked and the power of it was good!! Great job!’

[@crackpapa_]

He sure loves his needles :D

[@crackpapa_]

haters gonna hate and yo mama's gonna hate too

[@bystandersarah]

+Ceyhun Dursun The syringe part was a little freaky. The only syringes I know of are on the ground near homeless camps. I'm definitely not going to recycle them for this project!

[@crackpapa_]

I know, right? He uses syringes in many episodes. Little suspicous, if you ask me xD
-jk jk Ursu :)

[@DutchReptilesOfficial]

+Sarah K you can order syringes online

[@Facetzpomyslami]

+Jimi-ray grotenhuis In Poland you can buy siringe needles in pharmacy.

[@lancetyrell]

Brilliant. This is exactly what I was looking for. I have been using a 100 watt soldering iron, and making my own bits, but this would be great for finer detail.

[@mottthehoople693]

phuck there are a few smart arses here who are stuck well and good in the great american way.I actually tried this and it works ok.without any probs.If it had fried my ps well so what?
i have tons but as 5v@2A it worked way above my expectations and took about 20min to construct.I say well done but I'm not some teenaged merikan boy who knows everything.Just an old aussie ex army ex mining engineer who sees a nice simple idea that works in soft wood anyway.

[@djt6fan]

+Mott theHoople What the fuck are you on about? Seriously? What issue are you addressing here?

[@joshuaconstantin1878]

Panda oh sweet donald trumpy sexu

[@bugs181]

+Mott theHoople I agreed with everything in your comment except the hate toward "merikans". Ahem.. I'm American and I agree that there a loads of illogical and illiterate people here, but not ALL of us are.

[@pernanjp]

Don't let the know it alls represent the US, there are plenty of them here, but they aren't what our country is all about. I'm with you on this. I haven't tried it, but it seems interesting.

[@vollassitoni7795]

youre right Bro

[@chevyfan8206]

Maybe a stupid question but was there any issues with the thread or area where wires were attached to power supply catching fire, burning through the wood? A sensation of burning or electrical shock if you were to hold above where the connection was made? Thank you for the video thinking of making one as a fun tool to use. :-)

[@samsikhiabdullah2231]

Very good idea, simple, cheap and effective thanks ....

[@rennierrodil6119]

well it could be a soldering iron

[@jerry71000]

+rennier rodil The lead will short out the needles and drops the resistance to 0.

[@rennierrodil6119]

+Jfetz Fetizanan ahh okay

[@rennierrodil6119]

+Jfetz Fetizanan ahh okay

[@AdmiralTom]

+rennier rodil and the specific heat capacity of such a small tip with low power would not be high enough to solder many larger components

[@mottthehoople693]

+Tom Nicholls but it might be good to UNSOLDER some small components eh?

[@playstationvita9695]

One of the best channel on youtube your all videos are so much useful they made in home by using household item like it keep it up we all support you

[@geetatanwar4546]

It is very helpful for us thanks❤❤❤❤

[@jacobg.7801]

youmand your creations are amazing!!!thank you for those helpful videos

[@Claudiomarsantos]

Simple to make AND very usefull ... TKS ... !!!! ...

[@boblayton7434]

Good job, great directions!

[@JontoDickens]

I made mine by modifying an ecig. The rebuild able dripping atomiser has 2 posts meaning it was easy to make custom shaped wire heads for different effects and shapes like letters etc. The use of batteries also means it is cordless. Only do this if you know what you're doing - vaping has enough bad press without some fool blowing themselves up doing pyrography - of course this would never happen to me 😇🔋

[@whowhat4573]

+Jonto Dickens Hopefully not famous last words brother.

[@upwoodart]

Super broo

[@ARK98111]

your work is very very veryyyyyyyy good i like your work

[@xamharuch834]

thank you for this project it help me a lot

[@veganchaatparty]

Super Superb!!! Thanks for Sharing!!!!!

[@astaroth241]

you can also use nichrome wire to get same result...great vid btw

[@samudraprayitna6397]

it works, thanks for the instruction.. keep my money save ;)

[@igorkrstic8060]

Useful ! Tnx.

[@tizarabdo8201]

Great creation thank you so much please What's the voltage and amperage do u use

[@tinamckeage6665]

This is totally awesome

[@vitaliybagsugan7192]

Неплохая идея, для походных условий, если применить как паяльник. Молодец.
Желательно не использовать супер клей, когда нагреется игла клей сильно фонит, и могут слезится глаза. Ну и зарядное на 2А не так часто валяется без дела, тем более исправный. :)

[@jasonatkins1095]

thanks for sharing! can't wait to try

[@neveedahjafri]

awesome :* :* :*

[@flyinghawk4068]

Ochin xarawo :)
Bravo !

[@ahmedfaredsadek2135]

great idea

[@datex8]

Very cool idea

[@saiteja5907]

its very cool,iam very intrested in watching it

[@deepaksolanki2000]

its really great one dear...i like it...kindly help to make 12 volt motor speed controller...

[@mohanishmmm6623]

thanks a lot !!!!! I made it it's brilliantly awesome and easy!

[@monicaav8207]

love u roman...thnkz a lot dear...i made it for ma decoration of wooden prjct soon will send it to u as well

[@ahmedfaredsadek2135]

this is very great channel on RUclips

[@alanjagroop1282]

How to make a 3.6v dc motor to work with ac wire to pluggin to an electrical outlet. 120v dc outlet. Without buying a different motor. Just the same 3.6 volt dc motor to take 120 currrent. To make a a plug in 120v drill.

[@wahyudiarsodewantoro5995]

i Love the idea, its very useful, thanks a lot

[@prameshgurung2485]

wow fantastic can we use another kind of needle

[@heladiorodriguez9311]

muy buen trabajo felicidades

[@sanchipsrausanjul7527]

INGENIOSO. GRACIAS POR EL APORTE. DESDE VENEZUELA, SALUDOS. HI

[@dominiclancaster2264]

Do you have to use a syreng nedle or can you use too sowing neddles

[@dr.futtbutt898]

syringe not syreng and two not too

[@dr.futtbutt898]

and needles not neddles

[@Casper-uy2vp]

Dominic Lancaster

[@vickihill6544]

Cool!

[@novadelp5969]

this looks like a good idea. 👍

[@adxir42]

tried this twice, first attempt with two sewing needles (one regular and a much thinner one, as i had no syringe needle) and a usb micro b charging cable, second attempt with a sewing needle and piece of thin wire + usb c charger, both only resulted in sparks and no heat when i touched the needles together. I'm not completely sure, but i think the wattage of my power source might be the issue, as well as the second needle (I'm unable to procure medical needle) but a second opinion would be great. help ??

[@yenishful]

made mine.. works fine, but requires a bit of fine tuning! but it did turn out right though

[@suoppsdn9751]

I wonder if you could make an electric cigarette lighter with this kind of setup. That would be cool. I had one of those bag sealers that just used two batteries to melt the potatoe chip bags and stuff. Maybe you could make something to light cigarettes. Love your videos. I have downloaded a bunch of them.

[@Inventors-library]

تنويه ..
...
الاصح لمن يريد صنع تصميم استخدام محول الكهرباء الخاص بالمراوح السقفيه
او عمل كوبري بين اسلاك لمبة AC 220V منزليه العادية
كوبري +ملفات تقويه الجهد

[@saminasir6012]

Its good but you should add a voltage resistor or else there will be a huge possibility of a short circuit.

[@dilipdeshpande3313]

nice idea

[@mr.barbatos325]

Nice video. Please make a jet engine

[@moustaphabouali9582]

that relly good you are great

[@asadurrehman4462]

that a very cool idea

[@ahliajawedfaruqui8217]

Which two needles you mentioned?
Syringe needle and swing machine needle?

[@yoninekatibeb1422]

wow that is awesome!!!!!!!!!!!!!!!!!!!

[@bystandersarah]

this was awesome!

[@kasirhusadautama1827]

mantab bosque...thanks for your tutorial

[@tauhidulislammesbah7812]

awesome man

[@dhruvalraval4828]

very gooooooooooood video

[@filimonasefaw5635]

very nice ,but , can you show as using wires only pleas ,bu/c we don't know how the charger is made

[@jovynelkathbuesal2864]

nice mini pygrography tool but is not a short circuits.

[@asadasif7032]

I like your videos by these video I learn alot of things to do or made .

[@goluthegiant4112]

I did it nice working thanks bro romarnusu

[@amoghbhanushali8544]

can u show us how to make homemade drill

[@abramllano2050]

What about electrical tape

[@stefanivanov9755]

How to make a AirConditioner with Peltie Modules?
This is an offer you can do.
:)

[@r00n_]

Can someone explain why he uses a syringe instead of 2 needles???

[@abdoubouhafs3460]

You're a genius

[@madhavagrawal8662]

hey u r the best

[@totototunjo]

Does professional phyrography tool any extension burn like this at the top?

[@kristmantascepulis4287]

Coooooolllllll!!!!!!!

[@meetukalra2611]

very cool.

[@kaja1239]

What lacker did you use before you connected needle and cable? I'm completely beginner. Please, help me!

[@mythicfortnitegamers6300]

nice pyrograghy

[@gerikocibelli3072]

i nearly died doing this mini pyrography tool because instead of using a 5v charger i used a 250v one

[@ayitsalex2893]

How do you mess up that badly

[@abzersaber6411]

hey. nice tutorial. i have a question. do i need to use both needles different or can i use the same? i have a 5v charger output with 0.2 amp. will it work? its my PSP charger. thank you.

[@ajnol5364]

Dude amazing

[@jonjuan856]

Nice, thanks for sharing

[@simonsmith1386]

Cannot seeing this lasting five minutes to be truthful.

[@Randy-nb6fw]

this one is actuly so cool i can just make it at home

[@Christopher-ou1vm]

when I'll connect the wires to the needles and so on... and when I will connect it to electricity it will work properly?? or it can make fire sparkles and break down

[@sergiomonroy2278]

thanks

[@mehedi479]

Wow lovin it

[@ashwinnedungadi007]

wouldn't the needle ends also heat up and burn off the insulation?

[@whowhat4573]

+ASHWIN S.N (ASH) That's a good question. Only the ends that makes contact will heat up due to the electrical resistance.

[@hazrdusisnothere1451]

Awesome

[@upsonianmechanian4195]

thumbs up !

[@manuelbaschan7798]

verry cool.
but can the strigh burn?

[@vikramsookun3366]

very good

[@dusansimic1907]

Actually i did know that, i studied it from history, talking about needles right now

[@juliocesarvargas6665]

please tell me if that power supply...won't going to get a out of order..for using too much time...??

[@elamo4196]

but the needles don't want to solder , they are made from INOX , how can i do it ? please .

[@agampayama]

Oke good

[@Inventors-library]

^ _ ^
Thank you for this useful videos,
O continued innovative
Greetings
^ _ ^

[@alaeadventure8546]

facebook.com/Les-animaux-de-la-ferme-1656540014579618/

[@erikslosis2510]

In my case, needle tip flashes and not heating up. is something wrong with my adapter? adapter has 5v 2A.

[@haydenbarnes1148]

I will definitely be making one of these

[@deividnogueira4847]

very good..

[@stivenrodrigues007]

gr8t job

[@thatguy5659]

Can you use something other than needle any other material