I have an iphone xs max in which I have to change the geomagnetic sensor because it does not work. Can you tell me which spare part to replace please? Can it also depend on some flex cables? If so, which one?
Guys make sure you use your phones ORIGINAL OEM CHARGE PORT AND FLEX CABLE as otherwise the phone may not function properly and keep restarting , its easy to replace the charging port and flex cable just watch a vid on it :)
Im not sure if your aboit to help but i have an iphone xs max and i did a charging port replacement pretty easy but the phone stays on for 3 minutes and shuts off battery status seem to be correct everything work it just shut off after 3 minutes what do you think causing the issue
I did replace the housing successfully and the phone is working alright.The issue is anytime I am playing video on RUclips the phone will shutdown or restart .What did I do wrong?Kindly help me
Thanks for the video. Please excuse all the ungrateful people who can only criticize. They’ think they’re smarter than everyone else, and spend their days eating skittles, and their nights farting rainbows. 😳🤣 I am grateful, and appreciate you, your time, and tutorial.
what a waste... you literally surpassed a the most important steps, like takeing out the charging ports, and wireles charging pad, volume buttons and etc. We really did not need to see you making a cup of coffee....
*Links to screwdrivers and parts in the description under the video*
And ,what about the others parts??? Volume bottoms and dock charger port???
Most frames you buy from reputable parts stores come with all that
Wonderfull Video and huge thanks! I love the coffee break!
I did it accurately thanks to this video. Thank you so much!!
all you did was take out the motherboard
Do you heat up the back before pulling out the battery glue strip? Or should it be done as is to avoid the strip break?
Where is the rest of it?? Its sooo easy to take out the motherboard.. Hard part is doing the rest after that...
Hi! Thanks for you video! What happens if i just replace the volume flex and don’t connect it to the NFC Flex? Please respond. Thank u!
What size is the flathead screw bit you used?
Awesome video and thank you.
You skip how apply the bracket between speaker and other(11:57), that not seen from there.
I have an iphone xs max in which I have to change the geomagnetic sensor because it does not work. Can you tell me which spare part to replace please? Can it also depend on some flex cables? If so, which one?
Guys make sure you use your phones ORIGINAL OEM CHARGE PORT AND FLEX CABLE as otherwise the phone may not function properly and keep restarting , its easy to replace the charging port and flex cable just watch a vid on it :)
and the rest?
thanks for the vid!
What adhesive did you use for the battery? Does it matter much?
No it doesn't matter, you technically don't even have to glue it, although I advise against it. A qaulity Double-sided tape should do the trick
Thank you very much
Im not sure if your aboit to help but i have an iphone xs max and i did a charging port replacement pretty easy but the phone stays on for 3 minutes and shuts off battery status seem to be correct everything work it just shut off after 3 minutes what do you think causing the issue
Poorly connected some cable to the motherboard or secured the wrong screw
Were you about to fix the shut down?If yes how did you do it?
I did replace the housing successfully and the phone is working alright.The issue is anytime I am playing video on RUclips the phone will shutdown or restart .What did I do wrong?Kindly help me
Did you solve the problem?
I have same problem any help would be greatly appreciated
Njir nyeduh kopi dulu…sambil ngudutdonk
after i put my phone back together it is now stuck in apple logo loop. please help. I tried the hard reset already.
Check for bad battery connections to the motherboard. It is also possible that something else is bad connected.
This is not a full tear down/housing replacement mate...
It all depends on your case individually. A case is sold with buttons and cables already installed, as well as without.
What about hosting cables and other parts?
Buy your parts from mobile sentrix or other reputable parts dealers, they'll come with everything hard to deal with pre-installed for you
Mercithankiu very very much
GOD BLESS YOU
back housing replacement? You didn't even take half the stuff out...
Any reputable parts dealer will sell you the backhousing with those parts pre-installed.
That's awesome tutorial. Thanks buddy..
Thanks for the video. Please excuse all the ungrateful people who can only criticize. They’ think they’re smarter than everyone else, and spend their days eating skittles, and their nights farting rainbows. 😳🤣 I am grateful, and appreciate you, your time, and tutorial.
what a waste... you literally surpassed a the most important steps, like takeing out the charging ports, and wireles charging pad, volume buttons and etc. We really did not need to see you making a cup of coffee....
how about watching another video? Jesus...
interesting...
You skipped so much my dude
Brill vid
I need tools
Tbh mate your so slow on tearing it down to the housing it only take me 15 minutes to tear it down and 12 minutes to rebuild
👏🏻👏🏻👏🏻👏🏻👏🏻