How to convert surfaces to one Continue surface
HTML-код
- Опубликовано: 21 авг 2024
- If you enjoy my content, please consider supporting what I do: Buy a Coffee for 4KSide - ko-fi.com/vpalffy
or DONATE by www.paypal.me/...
WHY SHOULD YOU DONATE TO 4K SIDE?
More donation = more money
More money allows me to buy more coffee
More coffee makes me create more Creo Tutorials
More Creo Tutorials means more knowledge for you
More knowledge you have more productive you are
More productive so you earn more money
More money you earn more donation to me
More Thank you …
Vladimir Palffy - www.4kside.com/
... all of 4kside content with just one link: linktr.ee/4kside
Supported Channel: @doublewhitedots
Tags: #creotutorial #creoforbeginners #4kside #vpalffy #palffy #vladimirpalffy #how_to_creo
Always great tutorial for creo users.
Sir kindly ndly add videos regarding creo manufacturing module, covering the lathe ,mill etx
This tutorial is a bit misleading. Yes, using this method you get one surface without any isopram lines. However, the surface created using this method will still have tangent connections where the original 2D geometry meets at a tangent point. So the surface created using this method is not "smoother", just expressed differently i.e. as one surface.
If you want a "smoother" connection between surfaces you will need to play around with curvature continuous connections with curves and surfaces. These types of connection are expressed as a "G" value. The value of the connection shown in this tutorial is a "G1" connection, being tangent. To get a "smoother" connection you will need to explore "G2" curvature continuous or "G3" curvature continuous accelerated connections. The latest version of Creo facilitates these higher "G" values.
Another tip with the method shown here: You can extrude the copied approximate curve. Once you have created the approximate copy curve, just start a new surface extrusion and use the "select existing geom" tool to select the curve in sketcher. Then you can use all of the "extrude up to", "though", "specify length" commands. It's a more flexible approach than the method shown here.
Thanks for your great comment and another interesting way how to solve it. Stay tuned. Vladimir
Make video on this suggested Method
a bad tutorial! you dont convert a few surface to one surface!!!!
Hi, please feel free to share with us how to do it better. Thank you
This tutorial instead is very helpful, Arc+Line when extruded are never giving a correct surface, the distinction between the 2 parts is not a good way to design things. What Vladimir is teaching , with a simple example, is how surface modeling is about a very few Points on the curve which are smoothly defined in the example. I'm not sure from where you are thinking this comment: You don't convert a few surfaces to one Surface ( your English is also a bit improvised)...designers do that all the time to smooth things up. Learn creo then we talk....)