This helps a lot me and my dad are swapping a 2.7t into our daily driver 02 Vw Passat with 4motion and decided we wanted a single turbo as well. Hope it all works well for you with precision 5858 can't wait to see it up and running!
@@CIPGAS your build is awesome 👌 I've always wanted to do a stk on my c5 and I will when these Frankenturbo's die, 8 hard years those boostie boys have gone strong 💪.
Your oil feed will melt and ketch on fire router that way .the correct way which is forward up through the first runner back to the turbo.just trying to help I have a fully built 2.7t with a complete tubular manifold setup in my b7 s4 .things melting is a big issue.if a oil line of any kind sprays on your exhaust it will not might but will ignite.
Great video and looking forward to see more coming! Looks sharp and clean. Also the video was uploaded in 360p just an fyi...I’m still watching and still subscribed with that bell 🔔
Hi, nice video, really informative. I plan to single turbo my 2.7T allroad extremely soon. My only question is, what became of your single turbo 2.7T build? I noticed a Vr6 turbo in the engine bay of the S4. I missed the updates in between. Do you recommend the single turbo set up?
Hey, thank you! I sold all my single turbo parts to go vr6 so that I could keep tinkering with the car. I would definitely recommend it if you want the experience and noise lol but I think you can be faster on twins if that’s your aim
Cool, thnx. Do you think a different choice of turbo would have made a difference in the performance? Like maybe something with a smaller back housing, and a decent size compressor?
5 cylinder would be great but it’s a lot more work to swap in an engine bit meant for this chasis than to make power on the 2.7t. Specially when this engine e can handle a fair amount of power, sounds great, and has a huge aftermarket.
@@ericgorder1 you know alex mirea? He did that to a b5 a4 but s4s only should have a 2.7 still dont know why people swapping motors choose b5 chasis not b7
So with my car being a manual 2000 in the us I didn’t have to deal with those. But the CEL would have to be tuned out. Although I do have 2.8 heads now that have the rear ports for those but I just blocked them off.
I found mine locally from someone who was parting out a 2.8 a4 But you I’ve seen a few floating around on eBay US. International shipping would probably be killer but You may find some on eBay UK
Yh I guess the search continues and it is a killer from what iv been looking at not cheap atall been looking at a pair online that look identical to the 2.8 manifolds but there advertised as off a audi a8 v6 part number 078253034DG Are these the same as the 2.8 manifolds any help would be greatly appreciated thanks in advance
Really enjoying your videos. Sad and happy to see you're going the VR6 route. Would have loved to see more content with the 2.7 single set up. I recently bought a Stage 3 Imola Yellow S4. Wasn't looking for a B5 but I saw the ad and got enticed fast. Little flashy for me but was in great condition. In any case, I'm hunting down a boost leak/sensor issue causing rich fuel trims at the moment. Can't continue with tuning til I figure it out. Is there any chance you could make a video that discusses what you did with the stock rats nest of vacuum lines and valves/solenoids? N80, N75 and not running a MAF for example. I'm starting to gather info and create a parts list for a single turbo conversion when this current setup pops. Thanks for the helpful content! P.S. For the love of god, where can you find a comprehensive service manual for this damn car? haha I find free manuals on the forum but the info is all over the place and difficult to navigate. My previous car was a built Mini Cooper and the Bentley Service Manual was a life saver. Very easy to learn and work with.
Thanks for a great in depth video! I can't remember if you mentioned it in your previous videos, but have you done any internal work, like rods and pistons? Keep up the awesome videos!
I’m super late and you may not see this but I just recently bought a 2001 B5 S4. 130,618 miles. Done a lot of maintenance on it so far but nothing crazy as far as turbos. I have tons of questions about these motors and things. Is there a way I can reach out to you?
Engine is built but I’m looking for quicker response. The top end of the 6262 would be great, but I’d rather have the torque on the low end a few rpm earlier.
6262 gen2 will spool faster then your journal best 5858 I'm running a gxt3582r gen2 which is a65.7I'm compressor wheel and 82ar. Seeing 10psi by 3000rpm and 27psi by 3500rpm spending money on a turbo is the one thing you should if you want a fast spool time AND big power.
@@mk2vrt Turbo is definitely an important buy and it is definitely something you should spend some good money on, as much as your budget allows. Also a ball bearing turbo would definitely spool a bit faster that a journal bearing turbo but it would definitely not be. Big difference as that’s not its main advantage. A lot of the advantage of BB is the continued inertia which would allow you to hold boost much better between shifts and also durability when correctly oiled. But with that said spend a much as you can on a turbo but don’t let anyone tell you what you have is bad just because they bought something more expensive. Everyone has a different goal and budget and that’s why there are so many choices.
Great job on the content. Do you happen to have any time slips from you build or any dragy numbers. I have a a 2.7T and trying to decide which direction to go with the build and if its gonna be worth it compared to what I would spend to build a N54. * * Manual transmissions are awesome ( 3 manual Audi's including S4 4.2l, 08 Hayabusa, and 335Xi). I've manual swapped about 35 cars. But until they start making manual transmissions that can handle 7-800 ft lbs of torque, I'm done with manuals for now. Drive something with a 8HP tranny (swapped or oem) and form your own opinion. Speed and acceleration is relative. . . . .used to think my GSXR was fast until I jumped on a Busa. You will build A4s until you encounter something better. . . . 😊
Hey Man, Thank you! I don’t have slips or draggy info on the build sadly. I’m never on the drag strip and didn’t have access to a draggy but that would be a good investment. And honestly you’re right about the autos they’re definitely faster and newer ZF’s can hold a lot of power which is a huge plus. In my case I just like to drive and enjoy being around cars so a manual is better for me. If I ever get competitive about building a fast car then things would change. For the time being I don’t need the fastest, just driving for the fun of it. Also I’ve never even been on a bike lol I think it would ruin cars for me 😂
I have an 034 clutch line which is much longer and easier to move than the stock line. So I installed it before the engine was completely in. but also would be very easy to do from under the car. lots of space now without the turbos in the way.
So weird, I’m getting my donor b6 a4 3.0 6 speed this week, taking my 2.7 6 speed from my a6 and transplanting into the b6 been debating a STK, or f21s just not for sure because one is light mod and the other requires top to bottom work lol
You need a 3" v band for the turbo to up-pipes and a 3.5" one for the for the downpipe. The downpipe also ends on a 3.5' v band but some cut it off to weld an exhaust and other use it as is.
The flange is made to run that specific wastegate and the space under the manifold is very limited too.You might be able to use another wastegate if you weld a different flange in but the space may limit what you run.
Definitely one of the most underrated b5 channel
Thanks man! hopefully we can get mainstream soon.
This helps a lot me and my dad are swapping a 2.7t into our daily driver 02 Vw Passat with 4motion and decided we wanted a single turbo as well. Hope it all works well for you with precision 5858 can't wait to see it up and running!
Sounds like an awesome project! Best of luck! And thank you.
@@CIPGAS your build is awesome 👌 I've always wanted to do a stk on my c5 and I will when these Frankenturbo's die, 8 hard years those boostie boys have gone strong 💪.
RwdyAudi damn 8 years!!!! Those were worth the money lol
This has to be the minty'est "How to STK" video out there.
Very well done dude, she's a ripper
Thanks!!!
Oh!! You don't have to tell me to like and subscribe.. I'm here, dude!!! B5 Content? I am DEFINITELY HERE!!!!
Lololol thanks for the support!!!
This helps me so much! Thank you, thank you, thank you!
Happy to help!
Very well explained. Thanks for that.
Happy to help!
Your oil feed will melt and ketch on fire router that way .the correct way which is forward up through the first runner back to the turbo.just trying to help I have a fully built 2.7t with a complete tubular manifold setup in my b7 s4 .things melting is a big issue.if a oil line of any kind sprays on your exhaust it will not might but will ignite.
Thanks for the advice
I think those manifold ports are perfectly fine.
I have an a4 1.8t fwd I really want to do a 2.7t with a single turbo swap this video just make me want the big turbo v6 goodness so much more
Do it!!!
Great video!!!!!!!
Thanks!
Great video and looking forward to see more coming! Looks sharp and clean. Also the video was uploaded in 360p just an fyi...I’m still watching and still subscribed with that bell 🔔
Thanks man!! RUclips just takes a bit to process the HD copy of the video. Should be done in an hour or so.
Keep rockin, started my f21 avant couple days ago for the first time.
Nice man! Best of luck with it!
Good info 👍
Great video, lots of info that most people overlook. Keep up the good work, should be a wild ride.
Thanks!
Great video. Tons of good info. I'm not planning on going single turbo. Still some of the details give me ideas to keep my 2.7T in good shape. Thanks
Thanks man!
great video. Considering a 2.7 as my next project
Thanks!! And it’s a very fun motor to work on, with a great aftermarket, I’d definitely recommend it.
I like how informational this video is, good job brother keep it up 🤘😁
Thanks, will do!
Loving the videos man !! Keep up the great work ! It’d be cool if you did videos of the installation as well!
Thanks man!! And yeah I kind of ran past my timeline a bit so didn’t have the time to record the install video
This is a amazing piece of art, thanks for sharing, cant wait to see power numbers
Thank you! Cheers!
Great content keep it up!
Thanks!
another great vid..
Thanks!
Thx so much man!
Happy to help
I just learned so much thanks my guy!🤙🏻 happy new year🔥
Welcome! Happy New Year
Hi, nice video, really informative. I plan to single turbo my 2.7T allroad extremely soon.
My only question is, what became of your single turbo 2.7T build? I noticed a Vr6 turbo in the engine bay of the S4. I missed the updates in between.
Do you recommend the single turbo set up?
Hey, thank you! I sold all my single turbo parts to go vr6 so that I could keep tinkering with the car. I would definitely recommend it if you want the experience and noise lol but I think you can be faster on twins if that’s your aim
Cool, thnx. Do you think a different choice of turbo would have made a difference in the performance? Like maybe something with a smaller back housing, and a decent size compressor?
Go for the 5 cylinder engine! It's higher performing than the V6 I think.
5 cylinder would be great but it’s a lot more work to swap in an engine bit meant for this chasis than to make power on the 2.7t. Specially when this engine e can handle a fair amount of power, sounds great, and has a huge aftermarket.
From a rs3?
@@bigbootyanime3630 Preferred from an RS3. But other 5 cylinders from Audi or Volkswagen are pretty decent.
@@ericgorder1 you know alex mirea? He did that to a b5 a4 but s4s only should have a 2.7 still dont know why people swapping motors choose b5 chasis not b7
That's what I did built 2.7t bored over je. Ie.and put it in a perfect b7S4 full custom tubular single setup .it's my daily will 600 working on more.
Thinking of going twin turbo with one small and one large turbo in series. What say you???
Would be awesome!
The space would definitely be an issue but I think go for it!
Question, I see you’ve deleted sai & combi valves, can you please elaborate on what you did to get rid of CEL?
So with my car being a manual 2000 in the us I didn’t have to deal with those. But the CEL would have to be tuned out. Although I do have 2.8 heads now that have the rear ports for those but I just blocked them off.
SICK big TURNO man! hahahah just kidding man this car is going to be killer!
Lmao!!!! It’s fixed now.
Jealous... lol looks great man
Thanks man! Just build one too lol
Were did you buy your 2.8 exhaust manifolds from carnt get these in the uk and are holding me back from going single turbo on my s4
I found mine locally from someone who was parting out a 2.8 a4
But you I’ve seen a few floating around on eBay US. International shipping would probably be killer but You may find some on eBay UK
Yh I guess the search continues and it is a killer from what iv been looking at not cheap atall been looking at a pair online that look identical to the 2.8 manifolds but there advertised as off a audi a8 v6 part number 078253034DG
Are these the same as the 2.8 manifolds any help would be greatly appreciated thanks in advance
Really enjoying your videos. Sad and happy to see you're going the VR6 route. Would have loved to see more content with the 2.7 single set up. I recently bought a Stage 3 Imola Yellow S4. Wasn't looking for a B5 but I saw the ad and got enticed fast. Little flashy for me but was in great condition. In any case, I'm hunting down a boost leak/sensor issue causing rich fuel trims at the moment. Can't continue with tuning til I figure it out. Is there any chance you could make a video that discusses what you did with the stock rats nest of vacuum lines and valves/solenoids? N80, N75 and not running a MAF for example. I'm starting to gather info and create a parts list for a single turbo conversion when this current setup pops. Thanks for the helpful content!
P.S. For the love of god, where can you find a comprehensive service manual for this damn car? haha I find free manuals on the forum but the info is all over the place and difficult to navigate. My previous car was a built Mini Cooper and the Bentley Service Manual was a life saver. Very easy to learn and work with.
Thanks for a great in depth video! I can't remember if you mentioned it in your previous videos, but have you done any internal work, like rods and pistons? Keep up the awesome videos!
Thanks man! And yes the motor has Pauter rods installed with stock pistons and new rings.
@@CIPGAS Sweet thank you man!
I’m super late and you may not see this but I just recently bought a 2001 B5 S4. 130,618 miles. Done a lot of maintenance on it so far but nothing crazy as far as turbos. I have tons of questions about these motors and things. Is there a way I can reach out to you?
Hey ma! Reach out to me o. Instagram @4uattros4 it’s the easiest way to get a hold of me
if your engine is built a 6262 ball bearing would EAT on this set up
Engine is built but I’m looking for quicker response. The top end of the 6262 would be great, but I’d rather have the torque on the low end a few rpm earlier.
4uattros4 thats fair, she’s gonna pull like a freight train im excited to see the finished product
6262 gen2 will spool faster then your journal best 5858 I'm running a gxt3582r gen2 which is a65.7I'm compressor wheel and 82ar. Seeing 10psi by 3000rpm and 27psi by 3500rpm spending money on a turbo is the one thing you should if you want a fast spool time AND big power.
@@mk2vrt Turbo is definitely an important buy and it is definitely something you should spend some good money on, as much as your budget allows. Also a ball bearing turbo would definitely spool a bit faster that a journal bearing turbo but it would definitely not be. Big difference as that’s not its main advantage. A lot of the advantage of BB is the continued inertia which would allow you to hold boost much better between shifts and also durability when correctly oiled. But with that said spend a much as you can on a turbo but don’t let anyone tell you what you have is bad just because they bought something more expensive. Everyone has a different goal and budget and that’s why there are so many choices.
Noice!
Bro can u help me with my Mk4 GLI it needs all type of work
Great job on the content.
Do you happen to have any time slips from you build or any dragy numbers. I have a a 2.7T and trying to decide which direction to go with the build and if its gonna be worth it compared to what I would spend to build a N54.
* * Manual transmissions are awesome ( 3 manual Audi's including S4 4.2l, 08 Hayabusa, and 335Xi). I've manual swapped about 35 cars. But until they start making manual transmissions that can handle 7-800 ft lbs of torque, I'm done with manuals for now. Drive something with a 8HP tranny (swapped or oem) and form your own opinion. Speed and acceleration is relative. . . . .used to think my GSXR was fast until I jumped on a Busa. You will build A4s until you encounter something better. . . . 😊
Hey Man,
Thank you! I don’t have slips or draggy info on the build sadly. I’m never on the drag strip and didn’t have access to a draggy but that would be a good investment. And honestly you’re right about the autos they’re definitely faster and newer ZF’s can hold a lot of power which is a huge plus. In my case I just like to drive and enjoy being around cars so a manual is better for me. If I ever get competitive about building a fast car then things would change. For the time being I don’t need the fastest, just driving for the fun of it.
Also I’ve never even been on a bike lol
I think it would ruin cars for me 😂
How difficult was installing the clutch line with the piping in the way? Great progress!
I have an 034 clutch line which is much longer and easier to move than the stock line. So I installed it before the engine was completely in. but also would be very easy to do from under the car. lots of space now without the turbos in the way.
why would you leave the turbo inside the engine bay? Supposed to mount above the hood
LMAO!
You still run this turbo? Thinking of doing this with a 6062
Actually just made a video on that
ruclips.net/video/4bYwu_ixbnA/видео.html
So weird, I’m getting my donor b6 a4 3.0 6 speed this week, taking my 2.7 6 speed from my a6 and transplanting into the b6 been debating a STK, or f21s just not for sure because one is light mod and the other requires top to bottom work lol
Both are great options. The duals are easier now because there are less changes but maintenance on a single build is easier.
4uattros4 that’s where I was wanting to be with it, change a turbo in 45 minutes vs pulling an engine sounds wonderful
Brian Steinkamp Exactly!!
can I get a list of the vband clamp sizes for turbo hot side inlet and outlet and the downpipe
You need a 3" v band for the turbo to up-pipes and a 3.5" one for the for the downpipe. The downpipe also ends on a 3.5' v band but some cut it off to weld an exhaust and other use it as is.
@@CIPGAS thank you so much
Those are well are suppose to be precision specific they're flanges change be bought at ATPtubo.com
Are you on stock internals?
Pauter rods and new bearing a new piston rings on Stock pistons
and the stock ecu is working good with this setup?
Yes it was, tuner did a great job
You can only supercharge the 2.8 rite
Yeah, if you were to turbo charge it it would just be cheaper and easier to install a 2.7t
How much boost are you aiming for? And how much HP?
Stop watching my videos lol!!! It supposed to be a surprise
4uattros4 i told you it was too late. I already saw the other video. It would have never worked anyway. It lasted this long lol
It seems like heat will be a huge issue with this conversion
It definitely was
Work on my v10 please it started running ruff needs a new intake and o2 bank 1 sensor 1
Never worked on one but I’m sure I could figure it out.
What happened to the k24s? They hold up?
Yeah they held up well and made great power. I just wanted something with a little more drama lol
What Precision turbo would you have chosen to see more usable boost sooner so you can boost around town like you mentioned you liked in another video?
I think a 5858 is ideal for around town fun
Any smaller and we’re limiting the motor and bigger adds lagg
Just blew one of my k04s idk kinda interested
It’s a fun project and about the same $$ as replacing the k04’s
Dude where in.jersey u from
South Amboy
Does anyone know if it's true that you can only run the tial mvr, xs power claims it, but I don't know that I buy that
The flange is made to run that specific wastegate and the space under the manifold is very limited too.You might be able to use another wastegate if you weld a different flange in but the space may limit what you run.
Is your motor built ??
Yeah it is
Who ur tuner
German Elite Tuning
How much power is this good for?
With this turbo would be good for a little over 600 AWHP
@@CIPGAS that’s solid! Should be fun! I just did k04s on my 2.7. Not a daily but fun enough. But that’s also in a C5 Allroad
your injectors are facing the wrong way buddy
I could have used this a couple months ago. Check out my single turbo B6 @Demringstho315
Followed!