Hello, i have the same machine and i don t get the pass-through stuff. The entry for pass-through is lower than the bed. doesn t that make your laser head defocused while engraving or cutting? as far as i know, you can t lower the laser and the board will get stuck into the frame if you rise the bed and using pass-through. Do you have any solutions?
Hi mate yes I know what you mean it never made sence to me either as that’s correct you can’t lower or raise the laser head so it would only work with one certain size material so it’s pretty useless I think as far as a pass through
How is the laser holding up after over a year? Really interested in getting one but trying to decide “Chinese” brand vs omtech. They look identical to me so far with my research.
Yeh I’m pretty sure they are the same or if not vevor maybe a cheaper version but this one I have has been great iv not had any major issues with it few things to tweak here and there but for the most part I can’t fault it! 👍🏽
On my machine the chiller is sitting beside it and hooked up To the machine, but vevor do sell them with the water tank inbuilt I think the 100w And 130w machines have that option
Yeh i definitely do just a small 5hp with I think it’s a 50L tank seems to work really well the compressor kicks on a fair bit but it is not very loud and also in a shed outside so it really doesn’t bother me, I have the ultimate air assist kit and super happy that I did do the upgrade it’s so much better than the small standard air assist they come with 😊
@@woodendayz mines is indoors I just got my omtech chiller & infinity kit. I’ve had my machine since April & haven’t Used It. My goal is to be up & running in two weeks. Any tips or advice, for indoors?
@themeditationcorner6531 I unfortunately not really as mine is outside in my shed I would only suggest making sure your extractor fan is all plumbed up good with no leaks so all the nasties vent outside, I could not imagine having the machine for that long and not using it lol you would be very keen to get it up and running hope all goes well for you 😊
@@woodendayz ikr. Anxiety took over & lack of help. I mentally shut down. Your videos help me get to the point of buying my machine. Thank You. Now I just have to put it all together. My infinity Air Filtration Kit 6", Inline Fan Carbon Filter and Ducting will be here Thursday.
@themeditationcorner6531 yeh it can be scary starting out that mainly why I started doing the vids I had no idea when I started did a lot of research and just took my time hopefully you can get it ally I and running let me know if you have any questions happy to help where I can
It’s just the power wire have you got the laser switch switched on? On the side of the machine hit the pulse button see what it says is your water pump turned on?
Minimum I usually put about 10 lower than my maximum the minimum is the amount when the machine slows down comming in and out of a corner so it doesn’t burn up the material too much 😊
I don’t have a link sorry as it’s purchased from a local shop but it is just application tape the same stuff they use on vinyl decals to transfer the sticker, It’s a mid tack masking application tape! Thanks for watching 👍🏽 cheers, Matt
Hey mate, this is just light tack masking tape same stuff they use for applying vinyl decals I got mine from a local place to me called discount printing supplies here in Australia 🇦🇺
Hello, i have the same machine and i don t get the pass-through stuff. The entry for pass-through is lower than the bed. doesn t that make your laser head defocused while engraving or cutting? as far as i know, you can t lower the laser and the board will get stuck into the frame if you rise the bed and using pass-through. Do you have any solutions?
Hi mate yes I know what you mean it never made sence to me either as that’s correct you can’t lower or raise the laser head so it would only work with one certain size material so it’s pretty useless I think as far as a pass through
How is the laser holding up after over a year? Really interested in getting one but trying to decide “Chinese” brand vs omtech. They look identical to me so far with my research.
Yeh I’m pretty sure they are the same or if not vevor maybe a cheaper version but this one I have has been great iv not had any major issues with it few things to tweak here and there but for the most part I can’t fault it! 👍🏽
Did the machine come with the water chiller inbuilt, or is the chiller sitting beside hooked up to it?
On my machine the chiller is sitting beside it and hooked up To the machine, but vevor do sell them with the water tank inbuilt I think the 100w And 130w machines have that option
Do you use a compressor?
I was thinking about getting the Fortress
Yeh i definitely do just a small 5hp with I think it’s a 50L tank seems to work really well the compressor kicks on a fair bit but it is not very loud and also in a shed outside so it really doesn’t bother me,
I have the ultimate air assist kit and super happy that I did do the upgrade it’s so much better than the small standard air assist they come with 😊
@@woodendayz mines is indoors
I just got my omtech chiller & infinity kit.
I’ve had my machine since April & haven’t Used It.
My goal is to be up & running in two weeks.
Any tips or advice, for indoors?
@themeditationcorner6531 I unfortunately not really as mine is outside in my shed I would only suggest making sure your extractor fan is all plumbed up good with no leaks so all the nasties vent outside,
I could not imagine having the machine for that long and not using it lol you would be very keen to get it up and running hope all goes well for you 😊
@@woodendayz ikr.
Anxiety took over & lack of help.
I mentally shut down.
Your videos help me get to the point of buying my machine.
Thank You.
Now I just have to put it all together.
My infinity Air Filtration Kit 6", Inline Fan Carbon Filter and Ducting will be here Thursday.
@themeditationcorner6531 yeh it can be scary starting out that mainly why I started doing the vids I had no idea when I started did a lot of research and just took my time hopefully you can get it ally I and running let me know if you have any questions happy to help where I can
What is the red wiring that on the laser tube for?
I have my laser hooked up but it won’t come on.
It’s just the power wire have you got the laser switch switched on? On the side of the machine hit the pulse button see what it says is your water pump turned on?
@@woodendayz I flipped the switches & still no power.
The water was running through the laser tube still no power
@@woodendayz do I have to do anything to that wire?
No you shouldn’t have to it should be connected to the tube on one end and the other should run into the power supply on the side of the machine
@@woodendayz the red wire is taped on top of the tube with electric tap on the end
40% is the maximum power? And the minimum?
Minimum I usually put about 10 lower than my maximum the minimum is the amount when the machine slows down comming in and out of a corner so it doesn’t burn up the material too much 😊
@@woodendayzgreat, thanks
Could you tell exactly or give a link for the masking tape?
I don’t have a link sorry as it’s purchased from a local shop but it is just application tape the same stuff they use on vinyl decals to transfer the sticker,
It’s a mid tack masking application tape! Thanks for watching 👍🏽 cheers, Matt
Hey thanks for a great vid, where do you get the transfer trade from?
Hey mate, this is just light tack masking tape same stuff they use for applying vinyl decals I got mine from a local place to me called discount printing supplies here in Australia 🇦🇺
Hey mate just wondering what you payed for one of these in aus?
Hey mate, I think it was $3800 and free postage 🤟🏽 good machine
80w co2 Laser 12mm acrylic cutting possible??
Yes absolutely it is 😊
Can you cut 10mm acrylic with perfect sides?
Good question iv not yet cut any 10mm acrylic, I’ll do some and post the video up thanks for watching 👍🏽
What font type are you using?
Can you tell me a driver that you work?
Still working ok mate, thinking of grabbing one
Yeh mate 100% it’s going great 👌🏽
Cool video! I sooooo wished you’d peel off the protective film as well!
Thanks, and yeh I should probably do that nearly 3 months in and it’s still on there haha, thanks for watching!
@@woodendayz do worry the app tape works very little burn bloom
Does it have an ammeter?
No not on this model
Nice! But I can do 3mm wood with my little 10W diode laser. Let's see some co2-specific cuts, like clear acrylic. 🙂
Absolutely it’s on the to do list stay tuned!
What are the Chinese charging for that machine and what are the bed dimensions?
I purchased this one from vevor it was $3495 au delivered and the bed or cutting size is 700 x 500 thanks for watching, Matt 👍🏽
i have the same laser . its a good starter one for me .
Yeh it’s a great machine I’m very happy with it so far
What is the model name?
E machine me 8 fit la cutting kar sakta he
No not 8 feet
What is the model name of this machine?
This one is a vevor 80w machine
looks same as Vevor - “VEVOR 100W CO2 Laser Engraving Machine 900x600MM w/USB Port CE & FDA Certificate”
Yeh it is but only 700x500mm
American companies make good lasers.
American companies dont make anything
Greeaat... The "Chinese Laser" brand...
Or... How about mentioning wtf the brand actually is?
🤣😂 the brand is “vevor” hope that helps 👍🏽
More Videos 🥰