Это видео недоступно.
Сожалеем об этом.
Dodge Charger RT Has over $15K invested under the hood! **CAN IT TAKE MY SRT!?**
HTML-код
- Опубликовано: 25 май 2024
- #dodge #charger #rt #hemi #srt #srt8
Mike owns an awesome Dodge Charger RT!! One day I’ll be half a swoll as him 🥲🤣
You mean the guy with the “ eat ass gain mass “ shirt has a slow 5.7L charger? Ya don’t say.
Lets be real his car only making about 375hp😂
Just wondering if you had any over heating problems with your srt8 charger
Always. That's why I did my engine swap to the hellcat
@@markschucht yep
@@flatbedjay7672 where did you do your swap and if possible how much did it cost
😂😂😂
Thats crazy!!! i put about $3600 in my 18 kia stinger gt2 and im pushing like 467 to the wheels with 488 ft
Damnnn bro that’s crazy even a rust bucket 🪣 Kia pushing more. 😳😳
That is what I am talking about
You’re making about 25-30whp more. He has a nice ride & build going. Hope he keeps building it up 👍👍👍
You’re probably right not to mention the 6th gens are 400lbs lighter but my sun roof does add 600lbs if I’m not mistaken 😅 I love the 8th gen RT’s!!! 💪🏼
Dude paid $15k for a $1000 rear end, $300 CAI, $800 catback? Shit I need to open a tuning shop
Pretty sure he said it’s cammed too
Got to pay to play man 🤷🏻♂️
Cam is another $5-700. Forgot he said headers too, $2-3k.
It’s clean, I’m not hating on the man’s car. Just seeing an opportunity
LSD, hellcat injectors, 6.4 intake off a jeep, hellcat fuel pump/s, decent tires, scat crankshaft. $5-6k and you’re putting whatever horsepower to the ground better
FYI you seem happier in this video. I hope everything is going well. We appreciate the hell out of you.
I did FB0, Cams/Heads/Valves; Torque converter,+ E85 on my R/T 10’ and it made 526RWHP/542WTQ.
No fkn way bro unless you added a stroker
🧢
@@MALR7 stroker 💯
You have an ecoboost 🤡
Lol 😂 and still slower then FBO E tuned 10 speed mustang
Did he forge the internals , and upgrade his stall converter?
My 2023 Charger RT Daytona has a personalized ( vanietry tag) license plate that reads RED HULK, because my car is Octane Red.
My MAGNUM supercharged makes 498hp. I consider that a fail until I'm at 500hp. Built from 370hp stock wheel! Cam kit/trans/full forge up next to run more boost. Tuned several times by pros. Not sure why any of that matters.
Nice video the 57hemi was hulk was pretty cool awesome owner I've got both at home my partner drives the 5.7L Hemi about to run some new headers on it
Very cool!
I spent $10k for 900hp, and that’s OK.
After spending 90k 😅😅
Hate to break it to u but a cam,headers,intake,tune,rear end and exhaust doesn’t add up to 15k
Lmao the click bait or dude got ripped off by whatever shop he went to 💀
15 grand...u can do a blower for that and make 600+
$15k? Custom stage II cam? ……..where do I start.
Dude got ripped off. That amount of power he is making should have been less than $5k. Given the did rape him with labor prices. Brand new car and did that!? Hulk patches in his car lol fml.
How is someone supposed to pay less than 5K for a stage 2 cam, exhaust, unlocked pcm, dyno tune, upgrade the whole rear end for less than 5k parts alone are over 5k it’s 2024 not 2001 anymore, could have he maybe payed less than 15k possibly but have a lot of shops out here messing dudes cars up too then you have to pay twice, unless you can do it yourself, best to take the safe route in my opinion
@@srtdad Brother… I have an identical model 2017’.
Ported 6.4 manifold w/ short runners and wired switch module , CAI Airraid, 3.09 LSD, full exhaust (with electronic exhaust valve delete, free flow through mufflers, all resonators gutted, X pipe) 180 degree thermostat, high volume hellcat oil pump, PCM unlocked, LTH w/ high flow cats, stage 2.5 cam, MDS delete, valve train w/hellcat lifters (OEM), phaser pin, tuned, entire suspension upgraded w/ new brake pads and rotors.
I’m at $6700 because of the suspension. Only thing I didn’t wrench or do myself was the exhaust and the PCM tuning. So, I’m telling you it’s doable.
$15k should have been for a complete forced induction build or turbo. Mind you I also live in the PHX area. Just saying 🤷🏻♂️
@@AgentBravoM well done my man, but as I stated unless your doing it yourself, (which you masterfully did) it’s going to cost a good penny 🙏🏼
@@srtdad Touché… cost of labor is what kills majority of enthusiasts with sticking to the their builds. It adds up for sure. That’s why I’m a big advocate of getting in there, reading, and learning as much as you can with cars and mechanics. I’ll just be damned if another man is touching my car if I have two hands lol. What’s your IG?
@@AgentBravoM your a better man than me brother 💪🏼🙌🏼🫡 my IG is srtdad_10 🔥🔥
So he did everything for boosting, but it isn't boosted? Did i get that right 😂
Not bad.. but if he added bigger injectors, dual fuel pump and E85 he'd be around 500 wheel Maybe more.
Then with the super charger on 16 pounds would be around 700-750wheel.
15k for like 100 hp is bad. Not tryna hate but man just buy a scat or cat 😂
Nice RT needs 315/35 Big Meats Winning
At 448 whp my scat will eat it for breakfast. Notice I said MINE before ppl in the comments start telling me the hp of a scat
SRTDad uploaded I can finally have breakfast🙏🏼
Hope you enjoy!
I gap my friends srt8 magnum all the time with my AWD 5.7 Charger. I used to struggle to keep up with my RT magnum, I beat him once because he wasn’t good with the auto stick
What's done to your charger?
@@redpilllife4life198 6.4 intake manifold off a jeep
4000 rpm torque converter
Hellcat injectors/fuel pump w/ booster
6.4 headers
90mm bbk throttle body
Hellcat cat back
6.4 crank from a srt392 challenger
Interior weight reduction (-250lbs)
AWD
But I was still beating him stock before I got addicted to modifying my cars
@DodgeChargerPursuit he must REALLY not know how to drive 🤣. If you were beating him in a stock rt. The chrysler/dodge AWD models are actually slower than the standard rear wheel drive models in the 1/4 and 1/8. It's only .1 faster to 60 than the rwd rt. Obviously, talking stock vs. stock, and they're actually about 250 pounds lighter. I'm comparing 14's. Being there was no LX platform V8 AWD car made after 2014. 8 speed came and bye bye awd. Would have loved if they kept making them. Had a 06 magnum rt awd myself. Man, could those things go through snow like a champ. It's awesome how far you have come along with your build. What's it making power wise?
There’s an 8 speed with the column shifter in AWD on the Durango pursuits. Don’t tag me before you research
He looked so salty...LOL. ahahahahahaahah
this whole time I thought it was a scat… pack….. RT…….?
😞😞
He prob coulda bought a new or used 392 Hemi for that price to swap in
Damn bro $15k for that . I had to come back and say that . I still can’t believe it. damn! 😞😞😞
So what exhaust does he have? I have a 2014 charger rt and im catless and muff/ res delete. Got a mopar intake. I hate the drone i get at 2k rpm on accel and decel
lol these are the kinda guys that make the Mopar community look bad
Is it 610 HP with a Lambo exhaust and a supercharger in the intake?
What is that badge he has? I can’t make it out
😂😂 it dnt even matter after that performance
Who tuned it Ray Charles?
He gotta cool car but no way people thought the rt was going to win roll or dig and no way he makes that much whp
Who knows man but either way both builds are 🔥💪🏼
why he got an rt in the first place
getting any older srt8 and a few thousand under the hood he gonna make at least 600 compared to 448
The difference in torque off the line sheesh
I think he needs a driver mod for the rt
Is it me or is that a viper steering wheel? 9:25?
RT's need a cam and headers. That would have been a better use of 15k....
Bro i did my own cam and shorty headers i spent 4000$ for everything and i tuned it on hptuners
He did cam it and add headers
@@srtdad you completely walked him im proud of you 😘
Hurt his feelings
His mods and #s dont make sense sorry.
Ole boy over payed
Got to pay to play man
From a roll you would get walked, clearly digs are your thing at 399 wheel all you gotta do is punch it. The dude had oversized tires (his sidewall extends over the rim) which is horrible for traction, then you got a roid head who cant time his gas pedal and voila. We want to see a roll race with a scat 60-130 then the 399 wheell case will be dismissed.
I plan to take it to the drag strip already have a Scatpack owner willing to dig race/ roll race will be a great video but I need to purchase a 360 camera first
the srt8 is 400lbs lighter
goofy built RT fr dude has no idea what hes doing
Bro . I still can’t stop thinking about it … $15k to be clapped but a 03 charger 🔌. I need to open up a shop asap .
Why you do the HULKHEMI like that! 🫢 Should’ve gave him a head start. Lol