I tried to load my surron by wheelieing on my carrier and I missed and slammed the skid plate on my hitch by accident. I haven't had throttle response since. Removed all my sensors (kickstand sensor, lean sensor, break sensor) but none of them worked. I think this might be my issue. Thank you for the video!
Interesting. I imagine a machine key could help keep them from misaligning again. Finding a non-ferrous one that wouldn't affect the magnet might prove difficult though. Though titanium keys arent too hard to find
Thats a good idea. It really looks like its meant to have a key. Even a piece of plastic would probably work. I don't think this magnet ring experiences much force. It just needs to spin with the shaft
it should be noted that loctite doesn’t cure unless there is an absence of oxygen. a super glue or epoxy would be a better solution in this instance. thank for all the information though, this was helpful!
my sur Ron works sometimes, then will shut off, if I'm doing a wheelie or twisting, then I'll have to restart, hopefully it starts again, but it's happening more and more, taking longer and longer, more trys to reboot
My Surron light comes on, digital display works, horn works but no throttle, replaced the throttle, removed all sensors, replaced display unit, replaced ac dc converter still no joy, looked at the hall sensor and it’s as it should be so totally stumped
I'm having the same issues. It randomly started working for 2minutes then it just gave up again. I think it may be a connector issue with the plug and play parts. Or maybe even a faulty connection to the throttle or to the controller.
Mine is doing these same issues, all works fine but the throttle, I sometimes get it to move an inch or two before throttle cuts out. Mine is a brand new 24’ Light Bee X with 14 miles on it. 😢 hopefully this is my issue.
@@Lwc4ddy they ended up swapping everything out but the frame, all new everything and it worked great for a week - now it’s broken again… no power anywhere at all. Bone stock 24’ LBX with just over 200miles on it now and my second major issue
I tried to load my surron by wheelieing on my carrier and I missed and slammed the skid plate on my hitch by accident. I haven't had throttle response since. Removed all my sensors (kickstand sensor, lean sensor, break sensor) but none of them worked. I think this might be my issue.
Thank you for the video!
Mine was a bad voltage rectifier 🤦♂️
Super helpful video! Thanks!
Interesting. I imagine a machine key could help keep them from misaligning again. Finding a non-ferrous one that wouldn't affect the magnet might prove difficult though. Though titanium keys arent too hard to find
Thats a good idea. It really looks like its meant to have a key. Even a piece of plastic would probably work. I don't think this magnet ring experiences much force. It just needs to spin with the shaft
I think I have the same problem. I wish you had a clip of you riding . To show what it was doing
Why did you use a flat head? When I spin my chain the inside spins is that not how it should be? Should I just line it up and glue it in the notch?
it should be noted that loctite doesn’t cure unless there is an absence of oxygen. a super glue or epoxy would be a better solution in this instance.
thank for all the information though, this was helpful!
Fixed my issue. Don't switch to chain if you guys dont have to XD I used super glue hope it holds.
Fixed my issue by upgrading to KO motor and controller, think the stock one was dead.
Great video
Did the loc tight work??
Thanks
Yeah it worked great. I haven't had a single issue since I used locktite
@@mbzoomer3799
Thx, I got lucky and only a bunch of dirt in throttle.
✌️🍀
my sur Ron works sometimes, then will shut off, if I'm doing a wheelie or twisting, then I'll have to restart, hopefully it starts again, but it's happening more and more, taking longer and longer, more trys to reboot
Not sure what it is but its probably not a hall sensor problem
Hey Rob mine is doing the same thing, did you ever figure out what was the matter with yours?
@@joshmcguire2815 same with me have you figure a way to fix
I have the same problem, have you found out what the problem was?
My Surron light comes on, digital display works, horn works but no throttle, replaced the throttle, removed all sensors, replaced display unit, replaced ac dc converter still no joy, looked at the hall sensor and it’s as it should be so totally stumped
Did you figure it out yet mines doing samething.
I'm having the same issues. It randomly started working for 2minutes then it just gave up again. I think it may be a connector issue with the plug and play parts. Or maybe even a faulty connection to the throttle or to the controller.
Disconnect and reconnect all the wire harnesses and check for loose grommets. Mine was cutting out anytime I hit a bump and that fixed it
It was the throttle that was broken on mine. One of the tiny weak connector pieces on inside of the throttle cable close to the throttle itself.
ur controller is fried
Mine is doing these same issues, all works fine but the throttle, I sometimes get it to move an inch or two before throttle cuts out. Mine is a brand new 24’ Light Bee X with 14 miles on it. 😢 hopefully this is my issue.
Please let me know if you figure it out, i have a 24 light bee with 100 miles, doing the exact same thing
@@Lwc4ddy waiting at the dealer, not sure yet. I’ll update
@@TheClutchCaleb what was the problem
I am getting the same issue on my 2023 with 1000 miles and a bac 4000
@@Lwc4ddy they ended up swapping everything out but the frame, all new everything and it worked great for a week - now it’s broken again… no power anywhere at all. Bone stock 24’ LBX with just over 200miles on it now and my second major issue