Installing RER in a rotax 700, Episode # 6 700 Skidoo Rev Mod Sled. PowerModz!!
HTML-код
- Опубликовано: 7 сен 2024
- I took the 800 out of the rev, removed the stator and pickups, did the same for the non rer 700, and then installed the 800 stator and pickups in the 700, now i just have to plug the 700 in the rev wiring harness and all set with RER!
Love rewatching these videos. I am a transplant to the great white north and before I bought my sled I watched all these videos trying to pick up some info on sleds. Glad to see how far you guys have came!
great vid as real world as it gets,,even the stator mistake,,,we have all been there,,thanks
I know this video is old but I am considering buying a 06 rev and these videos have been very helpful on what to look for and what to expect so for that I thank you brother
Glad I could help
louie your videos are really helpin me right now I have a skidoo that just blew the piston
i like the matte black rev in background more
The new 700 are going to be awesome!!
Awesome video
Thanks for the visit
don;t feel bad about the stator. I did the exact same thing on my friends MXZ 600.
Nice calendar!! LOL!!
i cleaned carbs, put new cdi box, cleand fuel pump, checked all oil lines to make sure they are not pluged checked fuel line in gas tank to make sure the the lines is still on bottomdone losts of stuff and im stumped
I was wondering if you were going to damage your stator during removal like I did when I pulled mine off on my 2004 800 HO a few years back. My engine blew up back then. $350.00 U.S. dollars for that part! I'll remember to be more careful next time for sure! Keep the videos coming! I really enjoy watching them.
You are my favorite skidoo video guy to watch when I'm trying to learn. I need to replace the trigger coils on my 800r xp renegade 2008. What was the blue stuff you used between the coils and case? Is it like a silicone or what? I need to know because I only want to do this one time lol. Thanks for the educational videos 👍
Yes just silicone and thanks for watching!
hmm, not sure, but a carb issues can - have you cleaned them?
The worse thing and more dangerous to self is using chrome sockets w an impact.
This episode sponsored by Coors Light!!
OK..... I have a question regarding using the Electronic Reverse (of which I have on several machines)!
I realize that RER is used for a short duration only!
While the Engine is producing power in the opposite direction, what are the negative affects of both the coolant circulating pump and the oil injection pump operating in the reverse direction?
I would think that the coolant circulating pump would not undergo any issues.
However, I am curious as to whether or not there is a risk of the oil pump pulling air/fuel back into itself?
what was the stuff you used on your pickups, is it just blue silicone
I have a leak out of the crank i believe. ordered full seal kit for my 500...do you need to take out the whole engine or can you replace the o ring and seal behind the stator from that way?
Just a few comments, always oil the puller threads, also an impact on the puller usually damages the threads. Thanks for the vids. When tapping in aluminum you should use some tap magic (brand) or kerosene to aid in threading. What was the blue goo?
2017 Summit 600 carb, new stator & pick ups all put back together, pull pull pull pull-no spark, pull-get spark pull-get spark, pull pull no spark so on. sled fires up when it does get spark. What could be going on???
a bad ground or chaffed wire
Will it work with the 700 flywheel or do you have change that also?
I enjoy your video I lost my stater and flywheel on my sportsman 500 my new flywheel cost me 350.00 $ is there any way to buy just the magnet for the flywheel . I sure would like to know thank George
it should
nice I have a 2003 mxz renegade that I'm trying to put a 700 summit engine in and the 600 stator will not bolt in cuz were the center hole is too big and the bolt holes don't line up it used to have a 600 ho any ideas wat would work so I can just plug it in my existing wireing harness any help would be grate full thanks love your videos keep up the good work
Great video, as always. I jus picked up a 2006 mxz 600 rev. The price was right @$2000, but i never even heard it run, because the key was missing. Im a pretty handy guy. Ive rebuilt plenty of 2 strokes in my day, but were mainly old 90's era dirtbikes. My question is can i bypass the key switch on this sled? Im not even sure yet if its gt electric start...i havent even cracked the hood yet to visually look at the engine..jus to verify it had one. It was missing one button above the big blue one on left handle.(button is there but no cap) is this a RER button? Also why would it have a old school bomb tether cord? Dont they all use dess? Thanks a million for your videos and keep em coming. Guys like me are depending on ya.
I believe if you pull the points off the key switch it should start without the key, but not sure with a newer sled if it will work
Hey! My skidoo rev 600 h.o -03 wont give any spark, i have replaced the stator! It did just die when i was driving, it did backfire and loose all power just before! Do you think its the pickup? Thx for help man!:)
The blue goo was silicone.
I have a 2001 mxz 700 with electric start battery went dead so I had to pull start sled got sled running and while going down the trail I heard my recoil burst apart I hit a few bumps and heard a bunch of grinding and so forth I then take recoil off and all peices of the recoil were lodged in area of stator including medal peices of recoil I removed what I could now I have a power loss big time could I have screwed up the stator blowing that recoil apart and or damaged the stator and could that cause my power loss of motor none of this happened until that recoil burst apart inside there please help its not power loss all the time either and its more towards half throttle
what about the oil pump? i know on the older poos when you put electronic reverse you need to swap pumps that are bi-directional. not sure on the doos tho
love your vids Louis just a question,how come you never use any kind of penetrating oil??
have some issues with my polaris iqr 600 when i start it it goes for about 10-15 sec and then dies. have cleaned the carbs and everything but its still the same:(. someone known what may be the problem? great REV buildt!
+Tim segerljung change your plugs i had the same issue. put new plugs in and ran awesome
Hello, is it possible to put reverse on a non rer 800 rev ? If so would you know what wiring/electronics I would need ? Thanks for your time !
I have a 2007 Renegade 800 powertek, whats the difference between the 800 in my sled and the 800r? Could I put the 800r in my sled, or would it be worth it?
rotax electronic reverse
HELP
hey
i had to remove the stator and the pickups due to a dealer fuck up where a screw fell out and ripped apart the pickup coil
I put it all back together and then the flywheel cut my wires on my stator
so how the heck do you place those wires ?
is the rubber gromet have to be installed from outside in ? of so how do you do that with the motor in the sled
thanks guys >.<
hi, do you think the same "mod" would work on a 98 rave 670? great vids have helped me alot
Did you ever find out if it would work on a 670?
would this work with a 583 and put in rev chassis?
Yes you probably could I have seen S chassis skidoo’s with ReR I shit my pants when I saw it
No offense to this man....... after having see the issues during flywheel removal, I would strongly suggest:
a...... key removal followed by lapping the flywheel taper to the crankshaft taper. (clean well afterwards)
b...... using an Anti-Seize/Never-Seez compound on tapered shaft fitment.
This will make for a better fit and an easy removal next time.
I'm guessing that blue stuff was injector oil.
theres an oil delete on it no oil pump
Is there any way to put reverse on a 2014 ski doo rs?
how often do you post a video off when you are screwing on the rev 800? are it like you publish a video every day or when you got time?
Hi. I have a 07 summit X-RS 800, is their som way to stop the engine truble?
I need to reuid the engine every 1000 to 2500 km...
If I got lots of fuel in where the stator is will it not start ?
Luis can you put a 01 mxz 700 RER system on a 01 mxz 500? if so what do you need to do?
I cant say for sure - id have to see it.
What is the name of that blue goop that seals around the pickups ? Can someone please tell me.....thx !!
Did you have to reprogram the mpem?
hmm, I honestly cant remember - I may have mentioned it in a vid.
what editing software do you use
hey louis do you think this would work on a ski doo 500?
How does this tie in with the ecu/mpem?
I used an 800 reverse mpem but had it flashed for the 700 iirc
@@PowerModzOfficial Thanks for the info! Awesome sled.
could a bad stator make your sled backfire?
hey are you actually going to take apart your polaris XLT mod
can you believe i went to look at a snowmobile with a friends girlfriend. just to be the one to look it over,make sure no damage,twists,bends in frame, u know all the things ya wanna look for when paying $2500 for a 2003 mxz 800 sport. after spending a bit looking everything over we started it up and drove it around front to the trailer i brought ... it wasn't until the next day we went to unload the sled from trailer.. and whoa . how did i not notice this??? no electric start? ok well lets see if she can pull it over.. nope shes got bad shoulders. can not pull the motor over to start it..so i jump up and start it first pull.. ok not so bad. push button for reverse ... whoa??? no reverse .. uh ohh. this not good.i told her to re port the sled and once she sells it . just buy another and make sure its got both, but she really wants to add electric start and reverse to it rather then sell it.. how much cost and time on avg would be involved in this. primary clutch doesn't even have the flywheel. thinking maybe the last owner used this sled for racing. or just wanted to drop weight .. it sounds like its going to cost . and take some decent time to complete the project .
next time use never seize on the tip of your puller
What size tap?
What lock tight did you use
Like the color and number because I had to replace my stator and flywheel and not sure what to put on
Hey Louie, how tf do you wear gloves doing this lol
Easy!
what is RER ?
FCP
who can i get to tune my mpem
the different audio levels are terrible.. your voice is low and music is high.. so sick of turning the volume up and down.. other than that a great video series.. seriously can you fix this audio issue. Thanks!
+Brandon Haggard A little too hard to fix now, I'm not editing expert - especially not back then so we just have to live with it. I do try hard though! Cheers.
I enjoy his RUclips videos...... but I sure wish that he'd call an Engine an Engine...... and not a Motor!