Hi Torban! I have 2 Horus X10S Express with Edge TX each but it's impossible to connect between them using bluetooth, any clues of what is going on? I have activated bluetooth, 1 radio is in master/bluetooth and the other in slave/bluetooth but when I hit on "Discover" in the master nothing happens :( :(
Hi, thanks for the tutorial! I added a BT module to my Xlite, and linked it to my X9D+. I noticed that when the slave transmitter has control, the movement of the control surfaces of the plane is a bit rough, not as smooth as when controlled directly by the master transmitter. Have you observed this as well? Thanks!
Hi Jacques, I have also installed the BT-module in an xlite. The range very poor, not much more than a meter and the servo motion when using the slave radio is quite rough as you describe. I think I'll have to buy an X9 Lite and use a cable as the setup with the xlite isn't usable. Perhaps there is something new in the Para system that makes it work better?
Cool. Danke. Würdest du mal die Freelink App testen? mir ist es nicht möglich mich mit meiner X7S (XJT) zu verbinden. Laut Support ist die Freelink Beta nur für X9DP 2019& X9DP SE 2019 "Hi, this beta version currently for X9DP 2019& X9DP SE 2019 users to test only."
Hey man, I have non related question to the video, about the slim plus RX: As we know it's not real dual diversity. I remember I read somewhere it have one antenna connector which is more "prioritised" than the other one. I'm going to use the slim plus for the first time on a 7" build and plan to mount two T antennas. I want to mount one vertically and one horizontally. However I want to connect the vertical one to the "better" connector port. Do you know which port is more/better "prioritised" ?
Good Question, I have heard the same but also don't know if it's true and if there's a way to find out the better one. Maybe try and error works, if you get a bad rssi value than you probably have to replace the vertical one with the horizontal one. Let me know when you have found a solution.
@@TorbanDallas So far this is the only info/test I found about it: ruclips.net/video/VR2hDH7oM48/видео.html Seems that the further connector from the led (the bottom one if you look on the slim plus from the front), is the "better" port.
Hi Torban! I have 2 Horus X10S Express with Edge TX each but it's impossible to connect between them using bluetooth, any clues of what is going on? I have activated bluetooth, 1 radio is in master/bluetooth and the other in slave/bluetooth but when I hit on "Discover" in the master nothing happens :( :(
Hi, thanks for the tutorial! I added a BT module to my Xlite, and linked it to my X9D+. I noticed that when the slave transmitter has control, the movement of the control surfaces of the plane is a bit rough, not as smooth as when controlled directly by the master transmitter. Have you observed this as well? Thanks!
Hi, thanks for your comment, didn't notice that behaviour, but to be honest I didn't use the trainer function in a real flight scenario yet.
Hi Jacques, I have also installed the BT-module in an xlite. The range very poor, not much more than a meter and the servo motion when using the slave radio is quite rough as you describe. I think I'll have to buy an X9 Lite and use a cable as the setup with the xlite isn't usable. Perhaps there is something new in the Para system that makes it work better?
Cool. Danke. Würdest du mal die Freelink App testen? mir ist es nicht möglich mich mit meiner X7S (XJT) zu verbinden. Laut Support ist die Freelink Beta nur für X9DP 2019& X9DP SE 2019
"Hi, this beta version currently for X9DP 2019& X9DP SE 2019 users to test only."
Die App habe ich auch schon am Rande wahrgenommen, mich damit aber noch nicht weiter befasst. Muss ich mir mal bei Gelegenheit anschauen.
Hey man, I have non related question to the video, about the slim plus RX:
As we know it's not real dual diversity. I remember I read somewhere it have one antenna connector which is more "prioritised" than the other one. I'm going to use the slim plus for the first time on a 7" build and plan to mount two T antennas. I want to mount one vertically and one horizontally. However I want to connect the vertical one to the "better" connector port. Do you know which port is more/better "prioritised" ?
Good Question, I have heard the same but also don't know if it's true and if there's a way to find out the better one. Maybe try and error works, if you get a bad rssi value than you probably have to replace the vertical one with the horizontal one. Let me know when you have found a solution.
@@TorbanDallas So far this is the only info/test I found about it:
ruclips.net/video/VR2hDH7oM48/видео.html
Seems that the further connector from the led (the bottom one if you look on the slim plus from the front), is the "better" port.
@@alonhaiut1818 thanks, that's pretty interesting.