My first time watching your videos. Here’s the best way to remove any tape especially double sided: Goo Gone. You soak the tape with it, swab it or try to get the liquid to slip down into it. After a couple minutes the adhesive starts to break down and you are able to pull it off with very little force. Also, if any is still stuck on the car it will come off very easily as well since the adhesive is soaked with Goo Gone. Anytime you force pull adhesive you run the risk of removing paint from your car, the part, or even damaging either as well. I used to pull parts off just like you until I tried an adhesive remover, now my crazy ass loves when I get to use that stuff lol. Btw, Goo Gone does not damage paint just wipe with soap and water after use. There is one that specifically states on the bottle that it damages paint, just get the basic one.
Yeah I would've used goo gone but all i had was goof off which is stronger and I didnt wanna hurt my paint :/ I was also too lazy to go to the store too but thanks for the tip man!
I actually didn't see that inspire concept before this but it looks sick. Basically the exact look I wanted to go for on my car too but too bad the wrap I bought for the taillight looked horrible compared to my paint. If that becomes a real conversion I would forsure go for it but thank you tho man!
That roof spoiler looks dope . I got the same car color, gonna add a lip support too just in case. For my diffuser im going with a carbon fiber cover. Along with a black gloss grill cover and blackening out my emblems. The tint looks great wat percent u got? How much that cost u?
Sick mod man. I just picked up an accord sport as well. I was thinking about wrapping the rear spoiler and chrome on the windows. Have you thought about chrome deleting your rear (small) chrome?
Watchmeshine yeah i was debating on getting some but i wanna see the life on the before i cop. From what I’ve heard, some of them are already starting to bug out on people so I’m gonna wait it out some more. Thanks for the recommendation tho!
How is the spoiler holding up? Also, how did you close up the holes from the original spoiler? I want to be able to put the old spoiler back on, just in case, so I want a temporary cover so water doesnt leak in through the holes.
TragicFR still on strong! I did end up readjusting it cause it wasn’t flush and it was irritating me a couple months ago. Haven’t had any problems with it tho! And i just put duck tape on the inside and it’s held up well. Haven’t seen any leaks or anything after it’s rained
Chanthemaan Thanks for the response. Thats awesome that it still holds up! Im in a similar situation to you. Broke college kid with 10 gen accord in need of some mods, so your videos help me alot! Also if your in need of some taillight mods, I think I found an affordable option for taillight tints without changing the identity of the car. www.ebay.com/itm/2018-2019-Honda-Accord-Sedan-Tail-Light-Smoke-Kit/254429217728?fits=Year%3A2018%7CModel%3AAccord%7CSubmodel%3ASport%7CEngine+-+Liter_Display%3A2.0L%7CMake%3AHonda%7CTrim%3ASport+Sedan+4-Door%7CEngine%3A2.0L+1996CC+122Cu.+In.+l4+GAS+DOHC+Turbocharged&hash=item3b3d29c3c0:g:xwMAAOSwxphcaxM4. These are some taillight tints from a reliable seller. Check em out before you make any commitments to those HiRev mod taillights. Keep me updated :).
Nice video man and nice mods so far. I'm wanting to get the same spoiler as well. Just like you I'm broke but I'm a grown ass man tho, not in college 😂. Do you mind providing the link? Thanks and keep up the good work.
Hang Nguyen thanks man i appreciate your input! 🤘🏼 Here’s the link to the wing www.ebay.com/itm/FOR-2018-2019-HONDA-ACCORD-JDM-V-TYPE-PAINTED-BLACK-PEARL-TRUNK-LID-SPOILER/192657085757?_mwBanner=1&ul_ref=https%3A%2F%2Frover.ebay.com%2Frover%2F0%2F0%2F0%3Fmpre%3Dhttps%253A%252F%252Fwww.ebay.com%252Fulk%252Fitm%252F192657085757%26rvr_id%3D0%26rvr_ts%3Da2df82161680ac1d1ba7c2c7fffd7c59&ul_noapp=true&pageci=96f68bf3-2b9b-403c-b972-20a22ac3c111
@@chanthemaan9411 thanks! I wanted to see how this spoiler look like on a white accord sport and it looks nice. I'm planning to get that front lip too but wanted a specific kind with pre drilled holes on them already. I did red out my taillights but mine has a cut out for the reverse lights tho.
Hang Nguyen yeah the wing is super clean so worth the money. From what I’ve seen on Instagram, klayground might have the lip you’re looking for but they charge hella for it and idk if they’re predrilled. Lmk about your progress tho man love to see other people’s accords!
@@chanthemaan9411 hey I installed the same spoiler and it looks bad ass. I was wonder tho if your had any pre-installed 3M tape on it? Mine didn't so I had to buy a roll. I did contact the vendor and they said that they're not allow to put 3M tape on it bs. I'm thinking of getting the same window spoiler as well. My front lip is on the way to me rn along with the rear sides as well. I have the same yellow fogs you as well and yeah I agree that it makes the car stand out more. I honestly don't like the look of that new diffuser you're bout to put on. I'm actually thinking of just wrapping it in matte or glossy black as I don't like what's out there rn. I saw a carbon fiber one but that wouldn't match up well.
@@volcalstone Yeah mine did come with the 3m tape attached but maybe it came from a different vendor then? The roof spoiler gives the car a nice profile so I say go for it! And yeah I feel you on the diffuser, I ended up getting mine for free but I never wanted to put it on bc it's not the nicest looking thing to me. You should go for just wrapping it, itd probably look a lot better that way. Appreciate the update tho man!
christian munoz i got it part of a package deal but here it is on its own rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F202411288182
christian munoz rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F312614157046 They’re just general ones off of eBay bc i don’t have the exact link anymore lol
My first time watching your videos. Here’s the best way to remove any tape especially double sided: Goo Gone. You soak the tape with it, swab it or try to get the liquid to slip down into it. After a couple minutes the adhesive starts to break down and you are able to pull it off with very little force. Also, if any is still stuck on the car it will come off very easily as well since the adhesive is soaked with Goo Gone. Anytime you force pull adhesive you run the risk of removing paint from your car, the part, or even damaging either as well. I used to pull parts off just like you until I tried an adhesive remover, now my crazy ass loves when I get to use that stuff lol. Btw, Goo Gone does not damage paint just wipe with soap and water after use. There is one that specifically states on the bottle that it damages paint, just get the basic one.
Yeah I would've used goo gone but all i had was goof off which is stronger and I didnt wanna hurt my paint :/ I was also too lazy to go to the store too but thanks for the tip man!
Where did u get the spoiler from bro looks sick thinking about putting one on mine too
Instead of tape Use a water proof sealant next time. It will last longer and give you a peace of mind
Nice man looks great. I wonder if it's possible to convert the rear to the Inspire rear end. To me the tail lights look better dont you think?
I actually didn't see that inspire concept before this but it looks sick. Basically the exact look I wanted to go for on my car too but too bad the wrap I bought for the taillight looked horrible compared to my paint. If that becomes a real conversion I would forsure go for it but thank you tho man!
That roof spoiler looks dope . I got the same car color, gonna add a lip support too just in case.
For my diffuser im going with a carbon fiber cover.
Along with a black gloss grill cover and blackening out my emblems.
The tint looks great wat percent u got? How much that cost u?
Pete Z thanks bro. I have 20% in the rear and 35 in the fronts. I paid like $200 for the tints. The support bars make it look hella nicer too trust.
@@chanthemaan9411 very nice man, what kind of support bars do you have?
Did the 3M tape keep the spoiler secured for a long time? Ever fall off?
Will that new spoiler you installed, actually fit over the original factory ducktail/spoiler on it, without actually having to remove it?
Sick mod man. I just picked up an accord sport as well. I was thinking about wrapping the rear spoiler and chrome on the windows. Have you thought about chrome deleting your rear (small) chrome?
Lawrence Ngo thanks man appreciate it. Blacking the chrome on the window made such a huge difference. Looks 100x better imo. Which small chrome piece?
Dude sweet car, good job on the mods! How did you tint your fog lights yellow? They look cool!
Mario Moreno thanks bro! It’s actually just a sticker that goes over it. I got it off of cruxmoto but they have them on eBay too.
I'd check out hi rev sports taillights if you wanna really add a pop to the back. Get the smoked tint lens with sequential LEDs.
Watchmeshine yeah i was debating on getting some but i wanna see the life on the before i cop. From what I’ve heard, some of them are already starting to bug out on people so I’m gonna wait it out some more. Thanks for the recommendation tho!
Awesome video, how did u make your turn signals red?
Joel Garcia they’re tail light overlays! Got them from Cruz Motorsports. They also have them in black
Chanthemaan like vynil?
Where can I buy that spoiler looks good
Hey Chan the man I have a 2020 Honda Accord sport do you think that spoiler will fit my car 😎
Hey bro I have the 2020 accord sport white , where did you get the tape to black it out ??
Where can you get the black honda badge for the front and the back? I cant find it anywhere
gabe rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F223486815690
These ones?
Car looks good.
Thanks bro
whats the name of the spoiler do you have a link fr them ?
thanks for vid...the old 3m tape might have been easier to remove with some heat first.
Peter Cho yeah i didn’t have a heat gun tho. Would’ve fasho made it quicker. Thanks for the tip!
Can you send me a link for where you got the blacked out trim piece for?
Where did you get you front number bro?link plss
I’ve had mine for two years but haven’t done anything to it. Any tips on what to do to it
Ride with me motors if you don’t want anything too crazy exterior wise rims and lowering always a good go to
so you don't have to drill holes into the trunk? its just 3m tape holding the wing to the trunk?
PersuAsiann_YT naw you don’t have to. Completely held on with 3m tape and hasn’t failed me yet 🤷🏽♀️
Chanthemaan that is a bet man. Your car looks nice. 😏👌
And where did you get the spoiler from and the rear window spoiler
PersuAsiann_YT thanks bro 🤘🏼
I got everything from eBay if you search through the comments i linked everything!
Ik im late but where did you get your lip and the bumper support bars
how do the lip support parts attach to the car?
edit: nice car btw
where did you get the lip support bars and did you have to drill?
Sam Sabin i just got some general ones off eBay and yeah i drilled through my lip and my grill. Kinda sketch to do but turned out really nice
Hey bro so this wing covered the trunk holes ?
TheRealJordi it does! Main reason i bought I bought this one. It also does look a lot cleaner tho lol
Where did u get that wing? I do like it
Diego Cárdenas rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F192657085757
How is it holding up?
that looks really good .. can you provide the link?
www.ebay.com/itm/FOR-2018-2019-HONDA-ACCORD-JDM-V-TYPE-PAINTED-BLACK-PEARL-TRUNK-LID-SPOILER-WING-/192657085757
Where did you get the new spoiler
Roy Cavazos not the exact link i bought from but rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F202436447731
I have the same problem , can you tell what kind of spoiler cover the hole
Joel G. This one covers the holes rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F192657085757
How is the spoiler holding up? Also, how did you close up the holes from the original spoiler? I want to be able to put the old spoiler back on, just in case, so I want a temporary cover so water doesnt leak in through the holes.
TragicFR still on strong! I did end up readjusting it cause it wasn’t flush and it was irritating me a couple months ago. Haven’t had any problems with it tho! And i just put duck tape on the inside and it’s held up well. Haven’t seen any leaks or anything after it’s rained
Chanthemaan Thanks for the response. Thats awesome that it still holds up! Im in a similar situation to you. Broke college kid with 10 gen accord in need of some mods, so your videos help me alot! Also if your in need of some taillight mods, I think I found an affordable option for taillight tints without changing the identity of the car. www.ebay.com/itm/2018-2019-Honda-Accord-Sedan-Tail-Light-Smoke-Kit/254429217728?fits=Year%3A2018%7CModel%3AAccord%7CSubmodel%3ASport%7CEngine+-+Liter_Display%3A2.0L%7CMake%3AHonda%7CTrim%3ASport+Sedan+4-Door%7CEngine%3A2.0L+1996CC+122Cu.+In.+l4+GAS+DOHC+Turbocharged&hash=item3b3d29c3c0:g:xwMAAOSwxphcaxM4. These are some taillight tints from a reliable seller. Check em out before you make any commitments to those HiRev mod taillights. Keep me updated :).
Do they make this same exact wing for 2013-2015 Honda Accord?
1boxerface1 super late reply sorry bro but i don’t think so. Our trunks have different shapes and lines to them :/
Yoo where did u get ur window visors bro ?
Arjun rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F192597848671
That looks really good man.
Thank you bro 🤘🏼
Nice video man and nice mods so far. I'm wanting to get the same spoiler as well. Just like you I'm broke but I'm a grown ass man tho, not in college 😂. Do you mind providing the link? Thanks and keep up the good work.
Hang Nguyen thanks man i appreciate your input! 🤘🏼 Here’s the link to the wing www.ebay.com/itm/FOR-2018-2019-HONDA-ACCORD-JDM-V-TYPE-PAINTED-BLACK-PEARL-TRUNK-LID-SPOILER/192657085757?_mwBanner=1&ul_ref=https%3A%2F%2Frover.ebay.com%2Frover%2F0%2F0%2F0%3Fmpre%3Dhttps%253A%252F%252Fwww.ebay.com%252Fulk%252Fitm%252F192657085757%26rvr_id%3D0%26rvr_ts%3Da2df82161680ac1d1ba7c2c7fffd7c59&ul_noapp=true&pageci=96f68bf3-2b9b-403c-b972-20a22ac3c111
@@chanthemaan9411 thanks! I wanted to see how this spoiler look like on a white accord sport and it looks nice. I'm planning to get that front lip too but wanted a specific kind with pre drilled holes on them already. I did red out my taillights but mine has a cut out for the reverse lights tho.
Hang Nguyen yeah the wing is super clean so worth the money. From what I’ve seen on Instagram, klayground might have the lip you’re looking for but they charge hella for it and idk if they’re predrilled. Lmk about your progress tho man love to see other people’s accords!
@@chanthemaan9411 hey I installed the same spoiler and it looks bad ass. I was wonder tho if your had any pre-installed 3M tape on it? Mine didn't so I had to buy a roll. I did contact the vendor and they said that they're not allow to put 3M tape on it bs.
I'm thinking of getting the same window spoiler as well. My front lip is on the way to me rn along with the rear sides as well. I have the same yellow fogs you as well and yeah I agree that it makes the car stand out more.
I honestly don't like the look of that new diffuser you're bout to put on. I'm actually thinking of just wrapping it in matte or glossy black as I don't like what's out there rn. I saw a carbon fiber one but that wouldn't match up well.
@@volcalstone Yeah mine did come with the 3m tape attached but maybe it came from a different vendor then? The roof spoiler gives the car a nice profile so I say go for it! And yeah I feel you on the diffuser, I ended up getting mine for free but I never wanted to put it on bc it's not the nicest looking thing to me. You should go for just wrapping it, itd probably look a lot better that way. Appreciate the update tho man!
What are those bumper lip guards for?
Where you purchased that spoiler ? Link ???
Hassan 89 rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F192657085757
Check out the LED back lights Version 1
Nice work 👍
michael cordell thanks man! 🤘🏼
Keep up the good job
Calvin Nguyen thanks bro 🤘🏼
Can you provide a link to that new wing?
rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F192657085757
@@chanthemaan9411 thanks man!
Nice work. Would probably do it in the future. btw, how did you get new accord if youre a 'broke college kid' haha
James Howlett saved up a good amount but still making payments on it so this and insurance kill my checks lol
James Howlett but thank you man 🤘🏼
Chanthemaan haha i see. I wish i got a car when i was on college.
Where did u get the spoiler
Nice , got the same car but a 2019
Could you link me to where you got your spoiler from please?
RiderX rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F202436447731
I have a question do you think this will fit to my Honda Accord XL 2016? Thanks
estiben Garcia naw i doubt it bro. The trunks have different shapes
Chanthemaan Thanks bro anyway I will keep watching your videos good job👍
estiben Garcia thank you! I appreciate the support 🤘🏼
do you have any links for any of these
Name of the Previous spoiler my dude?
Angel Cortez I’m actually trying to sell mine if you’re interested in copping. Dm on if IG if you want @accordctm
Where can I get one of those. I have a 2017 sport. Will it fit.
Edgar Meza sorry bro i don’t think it would fit. Our cars trunks are different.
URL link to product? Thx
Can you tell me how can I get the wing ??? Info please thank you
srtjeep25 www.ebay.com/itm/FOR-2018-2019-HONDA-ACCORD-JDM-V-TYPE-PAINTED-BLACK-PEARL-TRUNK-LID-SPOILER/192657085757?fits=Year%3A2018%7CModel%3AAccord&hash=item2cdb41d53d:g:g9gAAOSwgh5bmvqI:sc:USPSPriority!90804!US!-1
Yo bro where did you buy your roof spoiler?
christian munoz i got it part of a package deal but here it is on its own rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F202411288182
Chanthemaan thanks man keep up the good work 💯
Last thing lol can u send the link for the bar support for the front lip.
christian munoz rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F312614157046
They’re just general ones off of eBay bc i don’t have the exact link anymore lol
Chanthemaan thanks man!!! Was it easy to install it
What its call bro? Idk how i can buy it
Gen CFNA rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F192657085757
link for the new wing
thank you
rj mendiola rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F192657085757
Where do you get the spoiler from bro ?
rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F192657085757
I get pretty much all the stuff for my car off eBay
Where u order it from?
How much was the lip in the front?
Michael Morone i got mine for like $60 i think
How many inches are the lip supporters?
They were 8"-11" adjustable ones. Got them off amazon for like $15
you have insta of your car???
tuan nguyen @accordctm
Any leak on since spoiler install?
vidal161 super late reply but naw no leaks. It’s held up really well
@@chanthemaan9411 did u add plugs or anything to the factory holes?
vidal161 i just covered the inside with duct tape. Hasn’t leaked on me yet 🤷🏽♀️
What percent did you tint your windows?
Raphael Gutierrez 18% in the rear 35% in the front!
Wht color is ur tint %?
Jampee Saenthongkham 20 in the rear, 35 in the front
Please sen me the link I need these
Please do a video when you lower your car!
Vincent Do idk how soon that will be but forsure will record it. Might actually do the installation myself too so we’ll see what happens
I heard you lowered it already when is the video =)
how much did you get ur chrome delete window
James Howlett it was like $10 on eBay
Chanthemaan is it glossy or matte
James Howlett matte stickers weren’t cut the best but you just gotta work with it lol
Link on lip and lip support?
Bro Where can I get this wing?
Reggie Anderson www.ebay.com/itm/223240775660 not the exact link that I bought from but same one
Chanthemaan thanks I bought one. Can’t wait until it’s in.
Lock up the holes with silicone.
I thought about it before i got my other wing but i didn’t do it just in case i ever want to put my stock wing back on. Appreciate the tip tho
Right on 🤙🏻
How can I buy ?
Wow amazing 🤩
I'm interested in buying your wheels...let me know.
Showed every angle but the side
u have webside?
Bro put the link on the spoiler
rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F202436447731
Link for spoiler?
www.ebay.com/itm/FOR-2018-2019-HONDA-ACCORD-JDM-V-TYPE-PAINTED-BLACK-PEARL-TRUNK-LID-SPOILER/192657085757?_mwBanner=1&ul_ref=https%3A%2F%2Frover.ebay.com%2Frover%2F0%2F0%2F0%3Fmpre%3Dhttps%253A%252F%252Fwww.ebay.com%252Fulk%252Fitm%252F192657085757%26rvr_id%3D0%26rvr_ts%3Da2df82161680ac1d1ba7c2c7fffd7c59&ul_noapp=true&pageci=96f68bf3-2b9b-403c-b972-20a22ac3c111
And the lip
Waow 😛
Poor Accord.
I should of search how to install the back wing first lol
I installed it on top of the original wing 🥲🥲🥲🥲
Hopefully the 3M tape takes off
😄😄😄