i never comment on videos but this one deserves one! spent 2 hours trying to figure out how to connect my my printer to my macbook. this worked seemless! Thanks!
Thanks, i was struggeling for 2 hours and have a zd230 wifi. I am very unhappy that Zebras Manual is soo soooo bad. Thanks a lot for your work. Many your title is added with "and other zd models" . Best wishes
Fantastic Video! You saved me from sending back my new ZD420 wireless printer. With the instructions that came with the product , it was confusing and not helpful at all. After reading pages and pages of their pdf instructions , I was still no better off. I am not new to computing , the way they put things together was just not helpful at all. But with just one view of your STEP-BY-STEP video , I was able to set up wireless printing from my iMac with no sweat! Thanks!
*It’s perfect for the amount of labels I print. New **Bestt.Digital** Label Printer, Only had it for a day so far. Works great and was a super easy setup! Would recommend buying.*
@@jessepatch9076 please check the bottom of the printer , you have wifi module is optional , if it is missing you need buy and add to that, hope so it helps
Very good instructions video! When I tried to use it for Windows, I did not manage to change the printer port after wifi was configured. Windows could not connect to the printer. However, I added a new printer (skipped the one setup for USB) and connected via IP and then it worked.
Hello! I've run into an issue with adding the new port as in 18:55. My IP adress has a section with three 000. For example: 192.168.000.011 I try without the zeroes but it doesnt work, it says it cant find the device at all on the network. The same message when i enter the complete IP adress. Any suggestions? Thank you
Thanks for providing the best video about this printer, however you do not show how to actually print a label from android? I followed your instructions, got the green light, then my phone cant find the printer to print. also can you suggest how to troubleshoot? You should seriously repeat this video for the ZD421 wifi, with more detail, thsnks
hi, great job with the video. I am currently trying to use the ZD420 on Mac Os, but I cannot print a .txt with ZPL commands. Do you have a video where you explain that? Thanks and regards!
any idea if a BT dongle can be added to it aside from the OEM BT radio card/module? I've been trying to get one to accept BT file requests as the app I'm using is proprietary and BT coded only...
Hi Eric, thanks so much for the video this really helped me set up with mac os. It works fine but when we finish for the day we shut everything down, then the next day printer is not working and i have to re configure. in printer settings it shows as "in use' so deleted any print jobs pending and still dosnt work If you could help suggest what I can do it would be appreciated.
I want to use the zd621 in a mobile setup, how would i make this printer available to multiple ipads? the idea is for our team to register incoming guests rapidly with an iPad then print a label with the guest's name, is this possible?
Hi so I just got one of these is there a wifi module that it needs to print via nfc/wifi I can pair via Bluetooth but I get a communication error every time
Would it be possible to do a video on setting up a gk420d via wireless network on a mac? i am completely lost and slightly losing it trying to figure this out
I'm wirelessly connected on my samsung s20 but the print service plugin won't actually show up when i go to print. Is there an app that will let me print through the zebra?
Thank you so much I'm just about to purchase my first macbook and wasn't sure if it would work. I have 1 question would the printer still work on mac with my current saved barcodes on the zebra design 3 software? I am a retailer that uses barcodes and I have them all saved in the design 3 software to be printed on a 4cm x 3cm label. Cheers.
Thank you for making this video, I can’t tell you how many times it’s helped me out. These things are def not plug and play. For some reason mine defaults to back feed on. It’s printing across two labels. I can navigate my way to turn it off on my Windows based computer but can’t figure out how to get to that setting on a newly acquired Mac. I even checked the CUPS settings. Do you have any advice? Also wondering if you have a patreon page.
thank you for such a helpful video! I hope you dont mind me asking.. my paper size doesnt show the same options as your... it defaulted to oe w588h360 & my labels are not printing correctly to the size of my labels which are 102mm x 150mm & there is no 102mm x 150mm or 400 x 600' in my list of paper size options.. I would so appreciate your help! :)
Hello. I have a problem whereby my calibation label image is incorrectly aligned so I can't read the IP on the calibration report, thus I can't connect it to the Wifi. How can I adjust the printers default settings so it recognises the media size? I am using 4 x 6" labels
@@thecollegepicker just got this printer from Ebay and while following your setup I've gotten blinking warning lights for the data (blinking green) and the media roll (blinking red). Obviously, I have paper loaded. Any thoughts? I am looking around online and I see something about a ribbon cartridge. What's that all about in a thermal printer? Any guidance would be greatly appreciated.
Hi I don't have the Graphics tab in the preferences on windows, instead I have dithering tab, but setting it to none still leaves me with a bit glitchy quality, it's not as bad as your before but also not as good as your after. Or it's because I print from .png? Though that .png seems to be good quality and resolution and if no processing is applied it should print sharp. Also to rule out hardware issues, anything else like setup label or windows test labels print sharp.
@@Arek_R. What driver did you choose? The Zebra driver or the Seagull driver? Are you using the ZD420? When you print a label, do you open it in a PDF reader (ex Adobe acrobat reader DC), that sometimes helps
We have a surf shop in Honolulu and we need help in setting up our Zebra ZD421 to use with our Lightspeed POS. Maybe you'd be willing to help us out. we'd be happy to pay for your time.
Will this printer connect to the network if the router uses WPA2 password technology? The options in the app only say WPA PSK. Is this the same as I have not been successful in connecting the printer to the network and I have been very careful to make sure the SSID and password is entered correctly. Help please..?
I may be being thick and apologies if I am but imagine I know very little about computers/printers. I hae and Asus Google Chromebook with a standard USB port - will this label printer work on my computer? I see the Dymo doesn't and I'm unsure as to whether this will or not.
I am trying to connect it wirelessly to a Mac and when I print the configuration its not giving me an ip address its just all 000. What am I doing wrong? HELP PLEASE!!
Eric, my ZD420 won't connect to the wifi with my Windows, the WIFI light never on, is that normal? Another thing is the Dithering setup, I changed to none, but still has the poor quality of the bar code. Thank you so much if you can help me find out what's going on. Many Thanks!
How far did you get with iOS? I've been able to get the printer on the Wifi and the network light turns green but then won't print, says the printer is busy. Created the printer on the CUPS server site.
@@thecollegepicker got it working using another app, for those struggling with iOS: 1) Download Printer Setup app from Zebra, use to enter your Wifi settings in Connectivity and get the printer on wifi (bluetooth is slow, can't upload large files) be sure to give a hostname for the printer(leaving it at the default # did not allow me to see it in OS X). 2) Download latest firmware and LinkOS files from Zebra's support/downloads for ZD420 3) I loaded the LinkOS update first and reset printer. Then loaded the firmware and the printer began the firmware update on its own and will restart on its own. 4) You should be able to see the updated firmware # using info button in the app, upper right corner. 5) Follow OS X wireless instructions in this video to add the printer, share the printer on your network. 6) I used Printer Pro app ($6) to discover the Zebra printer and print from my iPhone. Seem like iOS should still recognize this printer via the sharing feature, this was on Catalina, so maybe it has been fixed in BigSur. *whenever I try to change "Type of transfer" option from thermal transfer to direct thermal it breaks the printer and it stops responding until you set the option back to thermal transfer. Next I'll try printing directly from eBay. The year is 2020 and we still have to deal with printer drivers.
@@wyattpatry Awesome! Thanks. I’ve had Printer Pro for a while, best investment for printing on ios. Did you ever figure out a solution for the thermal vs direct problem?
HELP! I got this Thermal printer from Alibaba, you might the seen it on RUclips. It prints out dark but not clear. I tried lowering the darkness, speed, and tried cleaning it but it still comes out spotty.
Is it possible to print over BT with an Android phone? I tried numerous apps, but non of them are able to print a label over BT. They all won't connect to or detect the printer. It's connected to a network via a cable, and I have the IP adress. I am not able to install drivers though since I don't have admin access on that computer. However, we use a third party programm to create steering samples and that prints labels with the sample info on it, so I'm not sure how they do that. When I try to add the printer via the config screen I can't find it either, that's why I tried to print via my phone so I also can print custom labels, but so far without succes. Does anyone have a solution for this? Thanks. :D
Hey Sagar Im having the same issue, did you ever figure this out? It shows as connected to my network but in the settings on the printer its stuck to wired and I can't change it.
I’ve been wanting to get a label printer for my small business for the longest time and finally pulled the trigger. I’m glad I did ! This machine is great ruclips.net/user/postUgkxw55tQTywUAAOsbrlwxONZULry77sFF1Q and the blue/green color matches the rest of the accents in my office. My favorite part is how small the footprint is. It’s less than 1/4 the size of my regular printer.Set up was fairly easy. Seller will email you a link with video instructions Which I found to be more helpful than the written instructions. I use a Mac and had no issues. They even included an adaptor for USB to USB-c which is great because I’m always losing mine! I had a few issues getting the labels to print properly and wasted quite a few sheets. You need to play around with the settings to get everything adjusted just right. If you have the wrong settings, it’ll crop off the edges or feed through blank labels. These aren’t issues with the machine though, just user error.
I am trying to install the printer on my Mac with little success. For me the printer does not show up when I click the + in "Printers & Scanners". I have tried powering the printer on/off, unplugged the USB etc but it stil doesn't show. Anyone else had this issue or have any idea why that is? Can't believe Zebra has made it so difficult for Mac users..
I ditched the "print preview" for Chrome/MBP via terminal. You can't trust the print preview and it just slows things down anyway. It's amazing how many hoops you have to jump through just to use an f'ing Zebra. But once you get it right it's awesome. Time to recycle a bunch of misprinted paper...
Printing with this app on android does not work. App and printer freezes. No response from customer service. Apps are not updated like the older ones. Adding the printer without the app on android does not work. So pc is the only option. If I knew about all this hazzle I would have bought a Brother printer or some other brand.
i never comment on videos but this one deserves one! spent 2 hours trying to figure out how to connect my my printer to my macbook. this worked seemless! Thanks!
Happy to hear that 🤝
Spent hrssss trying to connect it and couldn't as well as watching other videos that got me no where . Thank you . Life saver
Thanks, i was struggeling for 2 hours and have a zd230 wifi. I am very unhappy that Zebras Manual is soo soooo bad.
Thanks a lot for your work. Many your title is added with "and other zd models" .
Best wishes
Thank you! Direct to the point, informative and very helpful.
Fantastic Video! You saved me from sending back my new ZD420 wireless printer. With the instructions that came with the product , it was confusing and not helpful at all. After reading pages and pages of their pdf instructions , I was still no better off. I am not new to computing , the way they put things together was just not helpful at all. But with just one view of your STEP-BY-STEP video , I was able to set up wireless printing from my iMac with no sweat! Thanks!
Ayyy! That's awesome. This one was a bear to set-up. I'm glad you got it up and running 🐱
*It’s perfect for the amount of labels I print. New **Bestt.Digital** Label Printer, Only had it for a day so far. Works great and was a super easy setup! Would recommend buying.*
I have exact same model ZD420, but 8 don't get the option of wireless, option I get is Bluetooth and Ethernet
Same here did you ever find a answer?
@@jessepatch9076 please check the bottom of the printer , you have wifi module is optional , if it is missing you need buy and add to that, hope so it helps
Very good instructions video! When I tried to use it for Windows, I did not manage to change the printer port after wifi was configured. Windows could not connect to the printer. However, I added a new printer (skipped the one setup for USB) and connected via IP and then it worked.
Great to hear you got it going, these are a headache to setup 😭
23:02 maybe its fuzzy because in the print dialogue its scaled fit to printable area or its a pixel image in the pdf not vectors?
Hello! I've run into an issue with adding the new port as in 18:55.
My IP adress has a section with three 000. For example: 192.168.000.011
I try without the zeroes but it doesnt work, it says it cant find the device at all on the network. The same message when i enter the complete IP adress. Any suggestions? Thank you
Very well explained. Thanks buddy.
You are the best. Always giving us the best instructional how to information. Thanks.
You are welcome 🙂. 🙏🙏
Nice instruction, easy and good to follow.. keep on going!
Appreciate it 🙏
Thank you for the great info. After I got my ZD420 printing I am getting blurry labels. Do you have any idea why this is or how it can be fixed?
Appreciate your help
so helpfulllll thank you!!!
Great video, saved my bacon ! Thanks
Excellent Tutorial, it really helps. Thank you for this video!
You are welcome =)
Thanks for providing the best video about this printer, however you do not show how to actually print a label from android? I followed your instructions, got the green light, then my phone cant find the printer to print. also can you suggest how to troubleshoot? You should seriously repeat this video for the ZD421 wifi, with more detail, thsnks
Thank you so much, 👍👍👍
Very thorough and helpful. Thanks!
You are welcome, happy to help
hi, great job with the video. I am currently trying to use the ZD420 on Mac Os, but I cannot print a .txt with ZPL commands. Do you have a video where you explain that? Thanks and regards!
Great video! Thank you for the simple and great tutorial. Do you happen to know why my labels won't tear when i try pulling them from the printer
great video! Can you talk about bluetooth is standar on zd420 ? Thank you
any idea if a BT dongle can be added to it aside from the OEM BT radio card/module? I've been trying to get one to accept BT file requests as the app I'm using is proprietary and BT coded only...
Hi Eric, thanks so much for the video this really helped me set up with mac os. It works fine but when we finish for the day we shut everything down, then the next day printer is not working and i have to re configure. in printer settings it shows as "in use' so deleted any print jobs pending and still dosnt work If you could help suggest what I can do it would be appreciated.
I want to use the zd621 in a mobile setup, how would i make this printer available to multiple ipads? the idea is for our team to register incoming guests rapidly with an iPad then print a label with the guest's name, is this possible?
Thanks for the help!
Perfect thank you very much .
Hi so I just got one of these is there a wifi module that it needs to print via nfc/wifi I can pair via Bluetooth but I get a communication error every time
Yo, thanks for the info. That last part of using the ip address for setting up on a mac. Could not find that nugget anywhere. Cheers
⛏️⛏️⛏️ dig dug dig for info. Happy to help 🫡
Would it be possible to do a video on setting up a gk420d via wireless network on a mac? i am completely lost and slightly losing it trying to figure this out
Wont work if the GK420D doesnt have a Ethernet port on the back.
I'm wirelessly connected on my samsung s20 but the print service plugin won't actually show up when i go to print. Is there an app that will let me print through the zebra?
Did you find an answer?
great video, thanks!
Thank you so much I'm just about to purchase my first macbook and wasn't sure if it would work. I have 1 question would the printer still work on mac with my current saved barcodes on the zebra design 3 software? I am a retailer that uses barcodes and I have them all saved in the design 3 software to be printed on a 4cm x 3cm label. Cheers.
Should work. Same brand. I would think they make all their printers work in their program.
I've done all the instructions, I can find the printer on zebra utilities but not on any apps, any ideas?
Thank you for making this video, I can’t tell you how many times it’s helped me out. These things are def not plug and play. For some reason mine defaults to back feed on. It’s printing across two labels. I can navigate my way to turn it off on my Windows based computer but can’t figure out how to get to that setting on a newly acquired Mac. I even checked the CUPS settings. Do you have any advice? Also wondering if you have a patreon page.
thank you for such a helpful video! I hope you dont mind me asking.. my paper size doesnt show the same options as your... it defaulted to oe w588h360 & my labels are not printing correctly to the size of my labels which are 102mm x 150mm & there is no 102mm x 150mm or 400 x 600' in my list of paper size options..
I would so appreciate your help! :)
Hello. I have a problem whereby my calibation label image is incorrectly aligned so I can't read the IP on the calibration report, thus I can't connect it to the Wifi. How can I adjust the printers default settings so it recognises the media size? I am using 4 x 6" labels
appreciate the work you do...Very helpful
Thank you and you are very welcome 😊
@@thecollegepicker just got this printer from Ebay and while following your setup I've gotten blinking warning lights for the data (blinking green) and the media roll (blinking red). Obviously, I have paper loaded. Any thoughts? I am looking around online and I see something about a ribbon cartridge. What's that all about in a thermal printer? Any guidance would be greatly appreciated.
Is there a possibility to print on Android without cables and not through Zebra app? Only using printing service
Hi I don't have the Graphics tab in the preferences on windows, instead I have dithering tab, but setting it to none still leaves me with a bit glitchy quality, it's not as bad as your before but also not as good as your after.
Or it's because I print from .png?
Though that .png seems to be good quality and resolution and if no processing is applied it should print sharp.
Also to rule out hardware issues, anything else like setup label or windows test labels print sharp.
Any photo format isnt good for barcodes or so. Try to change it to .PDF
@@shittychannel4860 Used his sample label in PDF and it also printed poorly.
@@Arek_R. Are you on mac? or Win?
@@shittychannel4860 windows, the preferences settings don't look same at all and there's like 2x more tabs in it.
@@Arek_R. What driver did you choose? The Zebra driver or the Seagull driver? Are you using the ZD420? When you print a label, do you open it in a PDF reader (ex Adobe acrobat reader DC), that sometimes helps
Amazing video! Thanks so much for your help!
You are welcome 🙂
Hello there
Could you make the video for zebra zt220 printer (installation and configuration)
We have a surf shop in Honolulu and we need help in setting up our Zebra ZD421 to use with our Lightspeed POS. Maybe you'd be willing to help us out. we'd be happy to pay for your time.
Will this printer connect to the network if the router uses WPA2 password technology? The options in the app only say WPA PSK. Is this the same as I have not been successful in connecting the printer to the network and I have been very careful to make sure the SSID and password is entered correctly. Help please..?
Hi! Do Zebra printers support supermarket label formats? Thank you for the video!!
Hi I think a lot of supermarkets use zebra printer.
I have installed this printer ZD420 on windows. When I change the port to TCP and apply it just reads error in 'Printers and scanners' PLEASE HELP
جيد جدا اشكرك على توضيح و ترجمة
شكرا لك 😊
I may be being thick and apologies if I am but imagine I know very little about computers/printers. I hae and Asus Google Chromebook with a standard USB port - will this label printer work on my computer? I see the Dymo doesn't and I'm unsure as to whether this will or not.
i think it will. Should do.
I am trying to connect it wirelessly to a Mac and when I print the configuration its not giving me an ip address its just all 000. What am I doing wrong? HELP PLEASE!!
great video, my ZP 505 does not have a reset button, how do I get the report to print with my IP address?
Hi, unfortunately I dont have much experience with the zp505 =(
@@thecollegepicker We have solved our issues, thanks so much for getting back to me.
@@danablack3363 Oh good! How did you end up fixing it?
Eric, my ZD420 won't connect to the wifi with my Windows, the WIFI light never on, is that normal? Another thing is the Dithering setup, I changed to none, but still has the poor quality of the bar code. Thank you so much if you can help me find out what's going on. Many Thanks!
Hey, i'm having the same problem. Network light never lights on . Did you find a solution?
The zd420 is a pain to setup, if you make any mistakes on the ssid/password it will not work. Have you had any progress on it?
If the printer has been added to your WiFi network via an android device would my iPad Pro have access to the printer as well?
Unfortunately no ,😭 it isn't an airprint compatible printer.
@@thecollegepicker Thanks for the swift reply, much appreciated 🙂
@@leejones7139 you are welcome 🙂
How far did you get with iOS? I've been able to get the printer on the Wifi and the network light turns green but then won't print, says the printer is busy. Created the printer on the CUPS server site.
ios wont work with this printer unless its hooked up to some sort of print server that supports ios.
@@thecollegepicker got it working using another app, for those struggling with iOS:
1) Download Printer Setup app from Zebra, use to enter your Wifi settings in Connectivity and get the printer on wifi (bluetooth is slow, can't upload large files) be sure to give a hostname for the printer(leaving it at the default # did not allow me to see it in OS X).
2) Download latest firmware and LinkOS files from Zebra's support/downloads for ZD420
3) I loaded the LinkOS update first and reset printer. Then loaded the firmware and the printer began the firmware update on its own and will restart on its own.
4) You should be able to see the updated firmware # using info button in the app, upper right corner.
5) Follow OS X wireless instructions in this video to add the printer, share the printer on your network.
6) I used Printer Pro app ($6) to discover the Zebra printer and print from my iPhone. Seem like iOS should still recognize this printer via the sharing feature, this was on Catalina, so maybe it has been fixed in BigSur.
*whenever I try to change "Type of transfer" option from thermal transfer to direct thermal it breaks the printer and it stops responding until you set the option back to thermal transfer.
Next I'll try printing directly from eBay.
The year is 2020 and we still have to deal with printer drivers.
@@wyattpatry Awesome! Thanks. I’ve had Printer Pro for a while, best investment for printing on ios.
Did you ever figure out a solution for the thermal vs direct problem?
It's 2024 and it's still the same headache.... here i am trying to figure this out @@wyattpatry
HELP! I got this Thermal printer from Alibaba, you might the seen it on RUclips. It prints out dark but not clear. I tried lowering the darkness, speed, and tried cleaning it but it still comes out spotty.
how many tables can you print -do they run on ink?
Thermal printers do not use ink. It can print over a million labels.
Hey I got this printer on eBay because of your video. It didn't come with a power supply, can you find a link for me for a third party power supply.
I dont have a link but if you reach out to the seller he should be able to send you a power supply.
Is it possible to print over BT with an Android phone?
I tried numerous apps, but non of them are able to print a label over BT.
They all won't connect to or detect the printer.
It's connected to a network via a cable, and I have the IP adress.
I am not able to install drivers though since I don't have admin access on that computer. However, we use a third party programm to create steering samples and that prints labels with the sample info on it, so I'm not sure how they do that.
When I try to add the printer via the config screen I can't find it either, that's why I tried to print via my phone so I also can print custom labels, but so far without succes.
Does anyone have a solution for this? Thanks. :D
Can we change ip address in this printer ???
Wired Ethernet option is visible instead of Wireless in Connectivity settings of Zebra Printer Utility.Pls help me here
Hey Sagar Im having the same issue, did you ever figure this out? It shows as connected to my network but in the settings on the printer its stuck to wired and I can't change it.
@@lonesn1per I'm also having the same issue. Only see Wired Ethernet and Bluetooth as options. I have no idea what to do.
Same here.. Any solution?
@@rubenelkj This printer got diffrent models, even they got same name ZD420 some have WI-FI, some dosnt.
excellent, but my IP appear with three 0 (192.168.000.149) i dont connect wireles, please help me. thank!! fron Argentina hugs
Looks better than the Zebra GK420D
Hey I’m having trouble connecting this to my Mac wirelessly, it’s saying unable to verify the printer in your network
Did you setup the printer on the network? Its a pain to setup =(
I’ve been wanting to get a label printer for my small business for the longest time and finally pulled the trigger. I’m glad I did ! This machine is great ruclips.net/user/postUgkxw55tQTywUAAOsbrlwxONZULry77sFF1Q and the blue/green color matches the rest of the accents in my office. My favorite part is how small the footprint is. It’s less than 1/4 the size of my regular printer.Set up was fairly easy. Seller will email you a link with video instructions Which I found to be more helpful than the written instructions. I use a Mac and had no issues. They even included an adaptor for USB to USB-c which is great because I’m always losing mine! I had a few issues getting the labels to print properly and wasted quite a few sheets. You need to play around with the settings to get everything adjusted just right. If you have the wrong settings, it’ll crop off the edges or feed through blank labels. These aren’t issues with the machine though, just user error.
Timestamps in the description #thepeopleshero #printerpeople
Mega tut with timestamps. This printer was a pain the arse to figure out 😭
How to switch from direct mode and transfer mode?
In the driver.
How come I use my Android phone to print the label it stopped at uploaded to 52% and stop can’t print
What model printer are you printing from and what driver did you use to install it?
@@thecollegepicker ZD420 I USING I TRY DIFFRENT APP CALL PRINTCONNECOTOR WORKS FOR ME BUT NOT ZEBRA PRINTER SETUP APP.
my ZD420 have no NFC tag on it
Does the printer have an automatic guillotine?
You can buy it as a extra i think.
I am trying to install the printer on my Mac with little success. For me the printer does not show up when I click the + in "Printers & Scanners". I have tried powering the printer on/off, unplugged the USB etc but it stil doesn't show. Anyone else had this issue or have any idea why that is?
Can't believe Zebra has made it so difficult for Mac users..
I ditched the "print preview" for Chrome/MBP via terminal. You can't trust the print preview and it just slows things down anyway. It's amazing how many hoops you have to jump through just to use an f'ing Zebra. But once you get it right it's awesome. Time to recycle a bunch of misprinted paper...
This one is a nightmare to setup 😬💀 I remember the pain and suffering trying to figure it out without a tutorial 😭
Hi, Can you do one for setting up the printer via Bluetooth on windows 10 ?
I will have to test again on that. I cant remember off the top of my head but I think so.
How loud is it supposed to be? Mine is extremely loud and probably waking up the neighbours :/
Printing with this app on android does not work. App and printer freezes. No response from customer service. Apps are not updated like the older ones. Adding the printer without the app on android does not work. So pc is the only option. If I knew about all this hazzle I would have bought a Brother printer or some other brand.
Someone have a problem to connect via Bluetooth with iPhone 15 like me ?
👀👀👀
🖨️🖨️🖨️🤑
Attention! This is not a good option for Mac OSX. You can't have a good quality printer.
way over priced. and the newer model have cheaper component to pad the manufacturer's profit margin
Why you got your hat on? It isn't raining indoors is it?
Just got done playing tennis and probably forgot to take it off. It happens 👍
when i do wireless configuration the network led is red is doesn't turn green