Thanks, I got it working but with some details: *the repeater router must be pluged to the network with a wire, in order to have internet :) *the WAN slot on the repeater must not be used! *DHCP must be off *the repeater can be in the same network ip group: i.e. the main router 192.168.0.1, the repeater 192.168.0.2 and in the main router I configured DHCP settings to assing ip range from 192.168.0.3 and to 100 in order to reserve the first two ip addresses *And most important the SSID must be the same in both routers, its in the video but I just want to emphasize it.
Bhi g agr hum tp link router ko ptcl roter see bridge karte hin to ptcl wifi se connect kar k be net chale ge or tplink se be connect kar be net chale ge?
Yeah the TP-LINK MR3420 - has issues using WDS... I installed the gargoyle_1.10.0-ar71xx-generic-tl-mr3420 it did the job easily - to install gargoyle firmware first install goldenorb firmware then upgrade to gargoyle...
Hello , I tried same model 3G/4G Wireless N Router Model No. TL-MR3420 , Firmware V2, same steps but not working , when connecting a device "mobile / laptop" is has error : can't obtain IP address, , the root device is TPlink TL-MR6400 v5. , any suggestions
Thanks, I got it working but with some details:
*the repeater router must be pluged to the network with a wire, in order to have internet :)
*the WAN slot on the repeater must not be used!
*DHCP must be off
*the repeater can be in the same network ip group: i.e. the main router 192.168.0.1, the repeater 192.168.0.2 and in the main router I configured DHCP settings to assing ip range from 192.168.0.3 and to 100 in order to reserve the first two ip addresses
*And most important the SSID must be the same in both routers, its in the video but I just want to emphasize it.
this is not necesary, the repeater router not mus be pluged to the network with a wire in order to have internet
SSID shouldn't be same
Please can't it be done wirelessly without RJ45 cable? I want you to do a video on how to activate the TP -Link router to work wirelessly
how do we test if the bridge is working when it might be still the root router that is sending wireless signal in the first place.
Exactly. Like shown in video at 2:28. Root Hotspot is active and sending WiFi to PC still
How to setup a guest wireless network using the router??
And after disabling dhcp not workable router
Clear and concise. Thanks man
Can I connect a device with a lan wire while using the access point as a repeater?
@@aliraza83 thank you
Can i extend my wifi signal from another router through this router?
Thank from Portugal. Regards
Hello i wanted to know tp link mr 3420 router supports huawei dongle modem e 8372? Please guide ....
Is there any way to set up this router as a wireless repeater ?
nope
Please, name of the song?
Bhi g agr hum tp link router ko ptcl roter see bridge karte hin to ptcl wifi se connect kar k be net chale ge or tplink se be connect kar be net chale ge?
THANK YOU! Worked perfectly.
Awesome thanks. Worked with first try.
Hat super funktioniert, perfekt danke
Kya ye settings Android phone se internet share karne par kaam karti hai, maine try kiya par kaam nahi kiya jaisa aapne video me dikhaya hai
This is repeater and not bridge mode. And unfortunately doesn't work for router with newer firmware model. But thanks for the tutorial anyway
How many mbps do u have?
Hello , I tried same model 3G/4G Wireless N Router obtain
After I disable DHCP, I can't connect to the WiFi on my Android device. Why is it?
gracias por tu ayuda me sirvio de mucho EXITOS
Yeah the TP-LINK MR3420 - has issues using WDS... I installed the gargoyle_1.10.0-ar71xx-generic-tl-mr3420 it did the job easily - to install gargoyle firmware first install goldenorb firmware then upgrade to gargoyle...
Can you please tell me whi h goldenorb firmware to download for mr3420 v2..
how to find gargoyle for mr3420 v5 ?
Hello , I tried same model 3G/4G Wireless N Router Model No. TL-MR3420 , Firmware V2, same steps but not working , when connecting a device "mobile / laptop" is has error : can't obtain IP address, , the root device is TPlink TL-MR6400 v5. , any suggestions
now, how I connect to this router web page???
probe muchos metodos este funciono pero se le olvido cambar la puerta de enlace despues funca bien
Not happening bro.... After reboot ... It shows WIRELESS ASSOCIATE AND THEN RUN... BUT internet is not activated
It work will yes or no
exelente ayuda te lo agradezco mucho EXITOS
thank u so much!
Grazie!!!
worked! thank you ♡
it works.... thank you
Thank you dude
Thanks
GRAZIE
Thanks.....:)
thanks!!!
Thanks