AE86 - Change Front Brake Rotors and Wheel Bearings
HTML-код
- Опубликовано: 3 окт 2024
- Join this channel to get access to perks:
/ @doctoredgarage
Help support my channel and AE86 drift efforts by buying some merch!
www.doctoredga...
Check out my sponsors:
JUST ENGINEERING - Angle Kits and Suspension Bits - www.justengine...
ANNEX SUSPENSION - the best dang coilovers out there!
www.annexsuspe...
PANIC MADE - ITBS, Wiring Harnesses, Link ECUs, and more!! #MakeItGo !
www.panicmade.com
If you want to come drift Rockingham Speedway with MB Drift, make sure to checkout:
/ mbdriftseries
/ mbdrift
www.mbdrift.com
Here's my stuff -
www.doctoredga...
/ doctoredgarage
My DRIFT Team - Unsung Legends
/ unsunglegends
The Torque spec for seating the bearings is 22ft/lbs but do not leave it at torque. Tighten to 22ft/lbs, back off, tighten again to 22ft/back off, and I then tighten the nut with just my fingers and do 1/8-1/4 turn. That seems to get the hub seated but still loose enough that it won’t burn up the bearing. 👍🏼
I remember doing something similar the first time I did a set of bearings on my ae86. There is also usually a breakaway and rotational torque spec for these type of hub/bearings, but it is super awkward to measure.
I use my "by feel" method on probably 100+ cars in the last decade, but it was only after doing probably 50+ using the factory torque settings to where I had a more "calibrated hand" haha. I learned it from the lead tech at one of the shops I worked at years back.
ae86 life is best!
Haha yes!!!
That's a neat bearing packing tool! I've never seen it before! I just recently did this job on my Corolla. Well done my friend!
Thanks! It's super handy. I bought it when I bought my first 86 over a decade ago.
Cranking out that content Devin! Great informative vid!
Nice as always
nice video, I really want to taste that wheel bearing grease, it looks very appetizing for some reason. lol
😆😆😆