Information-wise, it's a very good video; well explained and easy to follow. There's just one thing wrong with it. The turbine is rotating in the wrong direction. If flow seems to be from left to right. If so, your turbine should spin in the other direction from that shown.
Sir your videos are very helpful to us and i request u pls make video for - Mass flow meter , MOV valve , Three way MOV valve , SOV valve and what is the difference between normal MOV & MOV inching type valve pls give those details in depth , thanks
Hi, Thanks for your informative video! Please explain, what are the 3 cables used for. What kind of logger matches this type of flow meter with 3 wires? Oscilloscope logger?
Hello HabibNO, Thank you for your question. I am assuming the 3 cables you are referring to are the 3 wires coming from the sensor. These wires bring the voltage to the sensor for it to work. One wire is positive. Normally, the brown wire depends on the manufacturer and where it is made. The common wire can be a blue or pink color, again depending on the standards used to manufacture the sensor, and the signal wire that comes out of the sensor can be the black wire, which is the output signal voltage to your measuring device. As we mentioned in our video, you can use a measuring device that meets your electrical and Engineering requirements. We showed you a Hertz meter and a Siemens PLC. Whatever meets your requirements. Here is a link to an international company you might want to learn more about flow meters in your part of the world for more technical information. Happy learning! www.us.endress.com/en/field-instruments-overview
Laminar flow? The purpose of straight pipe and, often, the tubes or vanes used to suspend the rotor is to avoid swirl. K factor does change with flow rate but it has been common for decades to use curve fitting to compensate for this non linearity as much as possible. Yes viscosity is a factor with straight blade rotors but higher tolerance with helical blades ( faure Herman) Then too calibration can be compensated for using inline viscometers (Smith Meters). One key factor is the response to a step change in flow rate can be measured in milliseconds. This fast response is key in some applications such as 'snap testing" jet engines.
Super! This is so good. I do not really know, but I guess turbine flow metters are often used in some filling machines. One interesting aplication I've heard of is using the measere of flow in order to determine the weight of the liquid with wich bottles are filled, ¿how accurate and reliable is that speaking in terms of the different viscosity and temperature of fluids?
Hi Erick. Turbine flowmeters are used in many applications, and perhaps filling machines as you suggest. I’m not familiar with flow measurement to determine weight. As we mention in the video, viscosity is certainly an issue with turbine flowmeters. On another note, the Coriolis mass flowmeter can be used to determine density as well as flow rate.
Hi. Thanks for your question. The K Factor is unique to the flowmeter and is determined at the time of production by the manufacturer. The meter K Factor will be included with your documentation when the meter is purchased.
Hi there. Having a different K factor will certainly change flowmeter characteristics. Unfortunately, the K factor is an inherent characteristic of each individual turbine flowmeter and cannot be adjusted.
Hi @Kazim Abdul Hafeez. Thanks for your kudos and question. Turbine flowmeters are unidirectional. Some flowmeters have a flow direction arrow printed on their side.
Hi there. Thanks for the question. Finding the k-factor of an existing turbine flowmeter is possible, but not easy. As we discussed in the video, k-factor is pulses per gallon. If you are able to move a known volume of liquid through the turbine meter, it's possible to determine the k-factor. You need a device that can measure the pulse generated from the turbine meter. You need to pump the known volume, (let's say in gallons), through the meter and record the number of pulses. The k-factor can be calculated using the pulses per gallon relationship. Testing to verify would be required afterwards of course.
Hello. Thank you for your question. You should always reference the user manual and spec sheets. All the user information and calculation formulas or tables should be included, or a reference should be made to the manufacturer's website. These devices follow the standard calculations based on the application engineering formulas. Happy learning from RealPars!
Great video...but i want to know, do they also have transmitters just like Temperature transmitters, which would input 4-20mA into the the PLC analog input?
Information-wise, it's a very good video; well explained and easy to follow. There's just one thing wrong with it. The turbine is rotating in the wrong direction. If flow seems to be from left to right. If so, your turbine should spin in the other direction from that shown.
Hi Eric, Thanks for your message and eagle eye!
The best RUclips channel ever!!
Thanks a million!
شو عم تعمل هون 😂
@@3makelmadridy اكثر قناة متابعها بحياتي انت شو بتمل هون😂
For more videos related to DeltaV, Honeywell, Yokogawa or ABB DCS, Visit our Channel and Subscribe.
The best of the best videos. Perfect explanation 👍👏👏👏👌
Thank you!
Dear sir u r doing great job thank you sir Love from India
Thanks for the support!
Vocês da Real Pars são demais. Obrigado. Muito bom mesmo todos os vossos vídeos.
Thank you!
Awesome,i really injoy watch your post,in linkedin and youtube and instageram❤👌🏻
Happy to hear that!
very good. My work in automation. i am really happy to meet you all. thank you
For more videos related to DeltaV, Honeywell, Yokogawa or ABB DCS, Visit our Channel and Subscribe.
Sir your videos are very helpful to us and i request u pls make video for - Mass flow meter , MOV valve , Three way MOV valve , SOV valve and what is the difference between normal MOV & MOV inching type valve pls give those details in depth , thanks
Hey!
Thanks for your comment and your suggestion. I will pass this on to our course developers!
Thanks for sharing and happy learning!
Superb Explanation Sir.
Thank you!
Excellent vedio👍👌
Thank you!
Excellent explanation
Thank you, Jalal!
Hi,
Thanks for your informative video!
Please explain, what are the 3 cables used for.
What kind of logger matches this type of flow meter with 3 wires? Oscilloscope logger?
Hello HabibNO,
Thank you for your question.
I am assuming the 3 cables you are referring to are the 3 wires coming from the sensor. These wires bring the voltage to the sensor for it to work. One wire is positive. Normally, the brown wire depends on the manufacturer and where it is made. The common wire can be a blue or pink color, again depending on the standards used to manufacture the sensor, and the signal wire that comes out of the sensor can be the black wire, which is the output signal voltage to your measuring device. As we mentioned in our video, you can use a measuring device that meets your electrical and Engineering requirements. We showed you a Hertz meter and a Siemens PLC. Whatever meets your requirements. Here is a link to an international company you might want to learn more about flow meters in your part of the world for more technical information.
Happy learning!
www.us.endress.com/en/field-instruments-overview
very informative lecture
Glad to hear that!
Great Video
Thank you very match continue your imformative work.... Thank you very match godbless
You're very welcome, Richmond! Thanks for your support.
Laminar flow?
The purpose of straight pipe and, often, the tubes or vanes used to suspend the rotor is to avoid swirl.
K factor does change with flow rate but it has been common for decades to use curve fitting to compensate for this non linearity as much as possible.
Yes viscosity is a factor with straight blade rotors but higher tolerance with helical blades ( faure Herman)
Then too calibration can be compensated for using inline viscometers (Smith Meters).
One key factor is the response to a step change in flow rate can be measured in milliseconds.
This fast response is key in some applications such as 'snap testing" jet engines.
Hi Jon, Good stuff. Thanks for the input!
exccccccellent and usefullllllll😊😊😊😊
Great to hear that, happy learning!
Very good 👌 team real pearl,, can you make same type video on Pressure transducer
Hi Kiran,
Thanks for your kind comment and your suggestion. I will pass this on to our course developers!
Thanks for sharing and happy learning!
Super! This is so good. I do not really know, but I guess turbine flow metters are often used in some filling machines. One interesting aplication I've heard of is using the measere of flow in order to determine the weight of the liquid with wich bottles are filled, ¿how accurate and reliable is that speaking in terms of the different viscosity and temperature of fluids?
Hi Erick. Turbine flowmeters are used in many applications, and perhaps filling machines as you suggest. I’m not familiar with flow measurement to determine weight. As we mention in the video, viscosity is certainly an issue with turbine flowmeters. On another note, the Coriolis mass flowmeter can be used to determine density as well as flow rate.
Or you can use the turbine meter with s density meter.
Awesome video sir.. more instrumentation topic videos to come sir..
Thanks a lot!
For more videos related to DeltaV, Honeywell, Yokogawa or ABB DCS, Visit our Channel and Subscribe.
thank you for this video!
You're very welcome!
it is good and I need next part
❤👍very very helpful..
Glad to hear that!
Great video!!!
Glad you liked it!
So when calibrating flowmeters,shall I change the K factor? and how to calculate the new K factor?
Hi. Thanks for your question. The K Factor is unique to the flowmeter and is determined at the time of production by the manufacturer. The meter K Factor will be included with your documentation when the meter is purchased.
@@realpars I do have the K factor but when testing the meter I got higher error ,so should I correct the factor?
Sir, very nice video & supportive. Please explain can we measure weight in kilograms or litter through turbine flow meter of flow of material.
Thanks for your topic suggestion, Rakesh! We appreciate you sharing that
Its nice explanation
Glad to hear that!
Can the flowmeter be adjusted by changing K factor ?
Hi there. Having a different K factor will certainly change flowmeter characteristics. Unfortunately, the K factor is an inherent characteristic of each individual turbine flowmeter and cannot be adjusted.
@@realpars That's good to know..Thanks
Fantastic. Thanks.
You're very welcome!
good work
Thank you!
Best animation
Thank you!
Great video. Are turbine flowmeters unidirectional or bidirectional?
Hi @Kazim Abdul Hafeez. Thanks for your kudos and question. Turbine flowmeters are unidirectional. Some flowmeters have a flow direction arrow printed on their side.
Muy bueno excelente, muchas gracias :)
For more videos related to DeltaV, Honeywell, Yokogawa or ABB DCS, Visit our Channel and Subscribe.
Nice video
Thank you!
Excellent
Thank you!
Thank you so much
You're very welcome!
thank you
Our pleasure!
Maybe pneumatic valve systems could be the next topic?
Thanks for sharing your suggestion with us! I have sent this over to our course developers.
Happy learning!
I have 2" turbine meter, but I did not have it's k-factor! how I can find it's k-factor
Hi there. Thanks for the question. Finding the k-factor of an existing turbine flowmeter is possible, but not easy. As we discussed in the video, k-factor is pulses per gallon. If you are able to move a known volume of liquid through the turbine meter, it's possible to determine the k-factor. You need a device that can measure the pulse generated from the turbine meter. You need to pump the known volume, (let's say in gallons), through the meter and record the number of pulses. The k-factor can be calculated using the pulses per gallon relationship.
Testing to verify would be required afterwards of course.
Very good
Thank you, Biruk!
can i get K factor calculation?
Hello. Thank you for your question. You should always reference the user manual and spec sheets. All the user information and calculation formulas or tables should be included, or a reference should be made to the manufacturer's website. These devices follow the standard calculations based on the application engineering formulas. Happy learning from RealPars!
Great video...but i want to know, do they also have transmitters just like Temperature transmitters, which would input 4-20mA into the the PLC analog input?
Hello James. Yes, there are vendors that offer transmitters with a 4-20mA output. Omega is one of these vendors for example.
@@realpars ok ...but in this video, there's no need for a transmitter
that was great
Thank you very much!
Perfect
We reached 600k wow
Nice
Good
Cool
very informative lecture