Zero Turn Mower Cranks But Wont Start Toro TimeCutter How To Fix Full Diagnosis & Repair Guide
HTML-код
- Опубликовано: 5 июн 2023
- Thank you for watching!! If we helped you out and you want to show your support - LIKE, SUBSCRIBE or give us a shout out below. If you saw something you didn't like leave your comment below as well, these things help us get better!
To see our recommended tools and products visit our Amazon shop at www.amazon.com/shop/individua...
We tackle this common and frustrating problem of a Toro TimeCutter Zero Turn Mower that refuses to start!
We are seeing this issue more and more on these Toro branded Loncin engine and wanted to share the knowledge.
We'll guide you through the step-by-step process of diagnosing and repairing your stubborn machine, saving you time, money, and headaches.
This is on a Toro Timecutter mower model 75740, which is virtually the same as the 74720 SS4200 and many other models.
Like and subscribe to see more helpful videos like this one! Save some money by doing it yourself!
#loncin #toro #smallenginerepair #individualizedrepair #smallbusiness #diymaintenance
About Us:
My name is Martin. I have been repairing tools and small engines for almost 20 years. We operate a small engine repair shop in Illinois. We service / repair Briggs & Stratton, Kohler, Kawasaki, John Deere, Cub Cadet, Toro Tecumseh, Loncin, Honda, Craftsman, Husqvarna, MTD, Troy Bilt, Simplicity, John Deere, Exmark, LCT, Generac and many more brands. We work on riding mowers, walk behind mowers, snow blowers, zero turns, generators, pressure washers and much more. We normally repair about 3,000 pieces of equipment every year and look at many more that are beyond an affordable repair. Hopefully our videos will save you some money and give you the information you need to work on your own equipment or figure out the issue at hand.
Disclaimer: Links included in the description are affiliate links. As an Amazon associate we earn from qualifying purchases. There will be no additional charge to you for purchasing here. We appreciate your support, which allows us to continue to provide original content!
Please be careful when repairing any piece of equipment and follow all possible safety measures. This video is for entertainment purposes only. 
Хобби
problem solved, the choke was the culprit. Great advice. Thank you so much.
Awesome job!
Great information. Now to remember everything. Lol. I’ve been doing things systematically, helps to remember.
It sure does! Get in the groove and it helps a lot!
Thanks for watching!
Right on! 👍
Thanks for watching!
ohhhh the ol' yard dog ....i sure miss rippin that thing around ......LOL
Been running around for quite a while now!
Thank you as a single woman i struggle keeping my zt running😢
Thanks for watching! Glad to help!
I had a bug and a twig in the elbow out of tank on my big tractor, took months to figure out.
Cannot tell you how many times i bled diesel lines.
So very important to check those elbows to tank
So much accumulates in these areas! Thanks for watching!
Most people can afford a spark tester light which is 15 bucks most eBay prices
You would think but never seem to have one when your mower goes down if your a homeowner
Wish I could figure out how to use mine
Question, my zrtur. n muffler bolts fell out. Put new sst in and tightened. They also came out. Did I do wrong using sst? Any hi temp threa locker?
We normally don't use SST because they are softer and can cause them to seize to the aluminum many times. A coat of oil sometimes helps slightly with this issue if you are going to use them. Are the threads pretty well gone at this point or are they ok?
@@IndRepair threads in good shape. They were tight when done. Normally never used, thought I would try. Will buy reg. Allen heads this time. Any type of third locker suitable with that heat?
@@steveriggenbach90 Vibra Tite 19960 works well just make sure you cure it properly before putting the mower in use. I have only used it a couple times in extreme cases but it sure works well. Doesn't really seem quite as tight as a red Locktite but will work in the high heat
@@IndRepair thank you
@@steveriggenbach90 Yes sir!
your opinion on encore ztr and encore engines ?
I have only ever worked on a few but from every one I have seen they look great but are a very poor quality. They seem to be made cheap as possible and do not stand up over time. Thanks for watching!
@@IndRepair DEALER SAID THEY HAVE THEIR OWN ENGINE FACTORY. i find that hard to believe.
@@bobhaddock957 Ha! Never heard that one before for Encore but some people will say anything to get a sale...I would check further into it before buying, last one I saw had good welding on top of the deck and the underside was just barely tacked and looked like a 5 year old did it
Looks like a design flaw✔️
Yeah sure doesn't seem to secure! With two in as many days I though someone else out there is probably dealing with the same! Thanks for watching!
Where can I find same engine
Looking for a replacement engine for this correct?
Let's say it starts with starter fluid but does not stay running?
See the video at ruclips.net/video/Yb8ec7vI_ZY/видео.html should cover your issue