Power Steering Kit for Nissan Skyline R32 & R33 Install Guide

Chase Bays Power Steering Kit - Nissan Skyline R32 / R33 with RB20DET | RB25DET | RB26DETT
The all new Chase Bays Power Steering Kit for Nissan R32 R33 Skyline is designed to eliminate the common factory power steering leaks, fluid spillover, and overheating issues with improved aesthetics, durability, and stealthy design. It is a full 100% upgraded A.N. Hose and Fitting replacement of the stock reservoir and hoses. From the reservoir to pump to rack (and cooler if upgraded). ALL Hose and Hose Ends are BMRS aka Brown and Miller Racing. This is the best Hose/Hose Ends in the world, the same components seen on NASCAR and Indy Car. All the Fitting Adapters are designed and manufactured by Chase Bays to be chassis specific for perfect leak free installs.
Our over-engineered Triple-Baffled Power Steering Reservoir (aeration and spillover proof) is at the core of this kit. It optionally comes with an upgraded Setrab Oil Cooler that can mount under the driver side headlight (or in the center) for additional airflow. Chase Bays only uses the highest quality components available. Our reservoir is constructed of 6061 aluminum and is anodized black with a laser etched cap. The reservoir itself uses our own aluminum bracket and can be mounted in the stock location.
DOESN'T WORK WITH HICAS PUMPS WITHOUT MODS. Our kit works on the "front portion" of the power steering pump but the rear/HICAS portion will need the veins removed and the ports blocked off. Most customers switch to KA pumps or non-Hicas RB pumps. Keep in mind just because you're car has HICAS doesn't mean it has a hydraulic HICAS system that runs off the power steering pump; most are electric and won't effect how this kit installs.
Chase Bays Power Steering Kit - Nissan Skyline R32 / R33
www.chasebays....
Chase Bays Nissan R32 Parts
www.chasebays....

[@ZaneForbes]

Just made a video install for R34 Skylines if anyone needed help on my channel! You will need to change 2 of the fittings provided and the whole kit should work :)

[@TheGreener121]

How much torque for the adapters into the steering rack? Will the adapters hold the specs suggested in the service manual?

[@Sommyie]

5:57 is the money shot

[@KerKoy]

Any different mounting option? Maybe a bit closer to rad?

[@EMDSD14R]

Will this also work for the RB20E engines as well?

[@FunWithSmexy]

will it fit R34?

[@kiweeltyler3586]

Are there any products for the Evo 8/9?