Hi ! First of All...Thanks very much for your good work ! 1 - I did install (LEXUS IS 350 EXECUTIVE 2020) HC MOTIONZ (Wenzhou Yecheng Auto Parts Co., Ltd) RGB Tail lights end of september 2022. Very satisfied until now.. No glitch no nothing. Quality fabrication speaking...similar to OEM as far as I'm concerned. Quality of Internal electronic components ? Dont know yet.. Made in China not always means bad quality. Iphones are made in ? So, to follow. 2 - Then I bought RGB Daytime running lights in february. Total failure. Unable to "connect" the device at all. I am an IT guy so ...tried eveything I know in order to make it work. No chance. LED controller box DEFECTIVE. The fact that we cannot "deactivate" startup animation and some interesting colors are ILLEGAL at least here in Canada has changed my mind to install this product. Quality of fabrication ? So..So... LOW. Lots of gaps and slots.... Not sure it would have really been IP67....standards. 3 - Bought NORMAL item (Animation White-then Blue-Then finally White) Drl in february. Startup animation was Ok. BUT the sequential ORANGE turn signal feature didn't work correctly. Lights stayed FIX SOLID ORANGE. No movement at all. Wenzhous Yechen Auto Parts engineers said was first time this type of problem... ;) Ask for a REFUND...last week.
I really appreciate the detailed explanation of your experiences. I’m sorry you weren’t satisfied with the DRLs. Mine have been perfect for me, but being an electronic device, they can malfunction. It sounds like you know that already 😅. I hope it works out for you in the end!
I wasn't able to get mine to work either -- the control unit/box is definitely defective on these. It seems like the earlier units (which the uploader received) worked, and then anything after a certain date was defective.
@@MrAlexDelarge I’ve heard of some of the modules being defective. But thankfully, I’ve also heard of the manufacturer or seller replacing the module with a new one. So I’d start there and see if that’ll fix your issue.
@@Grey3IS Agreed. I went through two separate units and gave up when the second one failed too. Refused to connect my phone and the lights didn't turn on at all, so a pretty serious fault/failure on the module level. I'm looking into the non-RGB version from HCMotionz or a Chinese retailer instead of Tanso.
@@MrAlexDelarge Ahh, I understand. HCmotionz is the manufacturer for the Tansowerkz DRLs (and for everyone else). The main difference of Tansowerkz and HC is that Tanso is really good at warranting/ replacing products fast and easily. Like you mentioned, it might be worth trying a different set of DRLs all together. Tanso offers the non-RGB too if you’re interested. I get if you’re wanting to go with another seller, but it’s all the same product.
Awesome! You’re going to love them. Yeah, it’s kinda annoying there is a wait time. But like you said, it’ll be worth the wait. I appreciate your support!
Yes, but just a slightly different set will fit your model year! I sell them now too. Shoot me a DM on Instagram, and I’ll make sure you get the correct set. 🙂
Great Video, I was on the fence about ordering these but you definitely answered my questions. I just installed last night and the app is not locating a device to change colors, any pointers on how to get it going?
Hello! Thank you for your kind words. Make sure the vehicle is running and the light stock is turned to low beam (headlights are on), then try to connect to the app. 🙂
@@Grey3IS ok will do. also on the diff patterns im not able to change it to a certain color like you show the light blue when you have it on pattern 70 for some reason.. any tips?
@@Grey3IS so around 13:50 it looks like a turquoise color then around 13:59 it looks like another color? how are you able to change animation color to a different one like you did? on my 70 animation it’s a diff color and can’t set it to like a red
Thanks for this amazing video 👍 I've bought the same DRLs, and after installation , the app is not showing the white color in the options .. Do you know how to fix this please ?
You’re welcome! Thank you for watching. I’ve heard from a couple individuals that the white color option isn’t available on the android version of the app. I’m not sure why this is happening. Do you happen to have the android version of the app?
@@Rseye Yessir. I’m sorry, it is a software issue. They haven’t updated the android software recently for some reason. If you find someone with an iPhone, you can actually change them to white from the app on their phone 😄.
What percent tint is on your rear windshield? I've been debating between 5-20% tint on the rear but was concerned I won't be able to see people behind me at night. Great video!
Hey my man! I have 5% on my rear windshield. The higher quality tint you get, the easier it’ll be to see out of it. Regardless you’ll be able to see their headlights behind you, but some nice ceramic tint will allow you to see pretty clearly out of it at nighttime. It’s worth the investment in my opinion. 🙂 Ceramic is also great for keeping heat out, v.s. normal dyed film which is purely for darkness.
@@Grey3IS I have a red is350 and have ceramic all the way around. 20% back and sides and 40% on the whole front windshield and I LOVE it. I always promote the ceramic tint. Also about to install the running lights and pre ordering the rear v2 sequentials. I can't wait. Keep it up.
@@matthewmoore5808 That’s amazing! Ceramic is the s***! Please reach out if you have any questions regarding the install. 🙂 Thank you for your support.
I got them from eBay! They come unpainted and I paint matched them. Here’s the link: www.ebay.com/itm/292835134029?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=9nN8UE_5Qb2&sssrc=2349624&ssuid=InDjhPXKRly&var=&widget_ver=artemis&media=COPY
What I like you to show us how to install led strips underneath of the car and light up simultaneous with puddles light from mirrors. Basically I like to see these lights on when I approach the car. Thank you
@@Grey3IS I don't know the color of the wires to power up the puddle lights if I know I would route those wires from hardness on the floor to body plug.
Make sure your low beams (head lights) are on, or have your headlights are all the way off! To bypass this, for auto during the day, turn off daytime running lights in your infotainment light settings. 🙂
Thanks for the video install bro help me alot. But can you help me with something? when i start my car, i can't change to solid colors or different modes. But when the car is shut off and i turn on the DRL manually that's when the car is off then theyll change the modes and colors. I don't know is it like that because driving Purpose. Thanks in advance
Awesome! To change colors when the engine is on, you have to have your headlights on or have them all the way off. To bypass that, to have them running on DRL mode, you can go into your lighting settings and turn off “DRL”. They will now be able to change colors whenever during driving.
Do you know if you can keep the colors changed while in drive? I just installed these drls but once you’re in drive it keeps going back to the color white.
Hello! If you turn your lights all the way off, or turn on your low beams while driving it’ll show the colors. If your lights are in DRL mode, it’ll be white. If you want it to show colors even when in DRL mode, go to your light settings (in your infotainment) and turn off the daytime running light function. They’ll not show white anymore until you manually set them to white in the app. 🙂
Do you know how much horse your making? Just curious to see what these guys can get up to with the proper treatment, and with your tunes do you notice anything different in lag
Hey there! I’m making approx. 306hp and 374tq to the wheels. I felt a significant different in the turbo lag and power produced by the tune. The Downpipe was another mod that I felt a decent change from. Someone just recently put the Muchboost upgraded turbo in their 200t and it should be making 300++hp now!
Hi, is it possible that this is some universal RGB driver, and could be controlled with a dedicated device instead of an App? would be nice to have something on-board. Second question: you normally drive with them set to white and change colors on parkings etc? I presume it is not possible to customize welcome animation, when you first start?
I’m not sure if there is a way to use a universal remote or some kind to control them. There has to be a way to match the frequency that the app provides, I just don’t know how. And yes, I usually keep mine white while driving. And unfortunately no, you cannot customize or turn off the start up animation (to my knowledge).
@@Grey3IS thanks for the fast reply, i checked your description after i commented lol. anyways is it easy to connect the bluetooth and use all the colours? i haven’t seen a single video talking about the app and how to connect it to your lights
I have the NON RGB version. ive noticed when i set my headlight knob to AUTO setting and the headlights switch when it get dark or driving under a tunnel on the DRL animation happens. Does this happen with yours? I now drive with headlights in manual mode to stop the animation occurring multiple times
Yes, it would happen because the DRLs are getting “power” to them at that point. To stop that from happening, you can turn off daytime runnings lights in your infotainment to fix this.
I just got these. Installed , but they don’t change color on the app, can you help me see if I did anything wrong or do I have to have my lights on a certain way?
Hello! The customization ability happens when your headlights get power to them or when the headlights and DRLs are off (when the car is on). When the car is off, you can switch the light stock to DRL mode to enable customization.
Unfortunately, the 3IS’ bumper tabs get worn out the more you take off & on the bumper. It’s knows as “bumper sag”. There’s not too much you can do about it unfortunately. This is a common issue amongst all IS’.
Hi mate, is there a startup animation? Can you customise it? Also, does it work like OEM where it is bright during the day and dims down automatically at night? Also, how do you get the turn signal to be at the same speed as these sequential ones? Thanks in advance
Hello! Yes, there is a start up animation. It is a rainbow dancing animation for like 1 second. No, you cannot change it or turn it off (to my knowledge). And the lights stay the same brightness unless you change the brightness via the app. The DRLs match the speed of your OEM turn signals automatically 🙂.
Does the changing animation speed in app affect the startup animation? Such that you can make startup faster and less noticeable? Do the drls stay on after unlocking the car?
@@brian3787 No, the animation speed in the app doesn’t affect the start-up animation. And for unlocking the car, the DRLs function like OEM. They turn on when applicable (like if it’s nighttime and your lights are on auto).
The box comes with instructions that have the QR to download the app. But here’s a link! apps.apple.com/us/app/%E5%85%89%E5%A5%94%E8%B7%91%E5%90%A7/id983155504
Just installed mine, mine only change colors when I turn my headlights on, when it’s on auto they are just oem color. Do you possibly know why that can be?
Not sure why but mine do the same. The headlights have to be on. So either turn them on with the light stock or put them on auto at night time. But a follower of mine just told be that you can turn your light stock to the OFF position and still change the colors of the DRLs. I have yet to try this though.
@@martinthomas5282 Yes! Mine does. One of my followers DM’d me and showed me that their app didn’t have white as an option. I thought that was funky. If you pause the video where I show the app, you can see where my white option is. Btw! If you have your headlights switched to DRL (or auto during the day) they will show white (while the car is running).
Since the DRL is in the headlight, it would have to be a whole headlight replacement. There are people that do custom additions of RGB DRLs for the “4IS”, including wisedetailz on Instagram. Here are some he did: instagram.com/p/Cp8HK5ApICc/?igshid=MzRlODBiNWFlZA==
I don’t believe so. But you can only change the colors of it if your light stock is switched to off or if your headlights are on. If the stock is switched to DRL, then they will display white.
The LED shift lights are an option when customizing a carbon fiber steering wheel! I’ll drop the link below. You can mess around with the wheel customization and kinda see what I mean. Also, you can use code GREY3IS at checkout to save 10%! tansowerkz.com/product/carbon-steering-wheel/#material
I totally get that! If you have the ability to see what it’s doing “internally” I’d love to know! It has a Chinese name, but you scan a QR code to download it. If you DM me on insta, I can send you the QR!
@@jakemoy993 order them from ebay, hcmotionz is the distributer. Youll just be paying tansowerkz as the middle man, same lights but youll spend 100$ less
It’s the OEM emblem with vinyl tint over it! Here is the tint that I used 🙂 www.ebay.com/itm/302570215663?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=LfNlqsXiRpS&sssrc=2349624&ssuid=InDjhPXKRly&var=&widget_ver=artemis&media=COPY
@@johnathannyumah8823 Hmm. Make sure the engine is on, the headlight stick is manually switched all the way to low beam, then check the app. Lmk if it still isn’t working.
Yeah so apparently the lights use a different app called happylighting for the 2018 model at least instead of the one you used. Just a little head up for anyone else who comes across this
@@johnathannyumah8823 That’s funky.. it’s not light runner? Where did you purchase them from? Maybe they changed something. Because the 2017-2020 should all be the same.
@@Grey3IS so I just got mine and got them installed. They were working fine but now when I set them to a certain color it won’t show the color when I’m driving but when I turn the car off the color that I put will shine until they time out
@@tlvckey1103 Ahh, gotcha! So, for them to show color (and not just white DRL mode) while driving, you have to have your headlights manually turned completely off or have your low beams on (either manually turn them on or leave it on auto at night time). If you have it on auto during the day or on DRL mode while the car is running, it will default to white DRL color. You can also turn on just the accessory mode (pressing the start/stop button twice), then turn your light stock to DRL. You’ll then be able to change the colors (during a show or whatever). 🙂
Are the different colors kind of dim in direct sunlight? I just got mine installed and was kind of expecting them to be a bit brighter with the different colors. At night time obviously this isn’t the case, but specifically at like midday in direct sunlight it’s kind of hard to see the colors Fantastic video by the way! Your commentating is very nicely done and your videos are just really easy to watch. Good stuff man!
Hello! I appreciate your kind words and support 🙂. And I agree. They aren’t the brightest in direct light/ during the day. That might be partially due to the “frosted” lens.
@@Grey3IS yeah I think you hit it on the nose, gotta be the frosted lens. That’s ok though, the white is still so bright even during the day it’s still an improvement Side question: is your roof wrapped black? Or is it just the normal nebula pearl?
Hello! No. Since the “4IS” has the DRL build into the headlight, it’s not going to be as cheap and easy to make it RGB. You’ll need to have a custom light builder/ modifier custom add RGB lighting to your DRLs within your headlight.
DRLs or headlights need to be on in order for the lights to connect to the app to make changes. If not connected then no changes can be made. Hope that helps
Yes! You can change them while your light stock is in the off position. Or, while the car is off, you can put your light stock to the DRL position, then you can change the colors.
@@supr3me47 You can also change them while your light stock is switched to off (with the car on), or while the light stock is switched to DRL (with the car off).
When my car is on and I turn the light stock down to the off position I still cannot change the color, only when I have the lights in the full on position, any tips on this ?
Oh man! I’m sorry. No, it has been pretty solid for me. Just have to make sure your headlights are on for the app to connect. That’s about the only thing!
Oh man! I’m sorry. There was a QR code for it on the instructions. Anyway, here’s the link to it: apps.apple.com/us/app/%E5%85%89%E5%A5%94%E8%B7%91%E5%90%A7/id983155504
Yes, you can make them white. It’s even brighter than OEM too! You can also adjust the brightness to your liking. And yes, you can turn on and off the DRL’s with the light stalk like OEM.
Yeah.. that’s weird. I would just put N/A (not applicable). And see if they email you regarding your order. I think it is a mistake on their part. Don’t forget to use code GREY3IS to sage 10% 🙂
@@CaseCloud97 Hmm, not sure what’s up with them. I don’t think they officially stated that they’re shut down yet. Anyway, feel free to reach out to me for anything. I sell mostly everything that they sold too. 🙂
Apparently Tanso was sold and the new owner is incompetent at best, fraudulent at worst. Not fulfilling orders after payment, abandoned their website/domain, etc. Steer clear from them at this stage.
The cables black, green and yellow from the OEM DRL lights. Do you know if green and yellow are power? Is the black ground?
I’m not too sure what each wire represents, I’m sorry.
That nighttider animation looks sick
Hi !
First of All...Thanks very much for your good work !
1 - I did install (LEXUS IS 350 EXECUTIVE 2020) HC MOTIONZ (Wenzhou Yecheng Auto Parts Co., Ltd) RGB Tail lights end of september 2022. Very satisfied until now.. No glitch no nothing. Quality fabrication speaking...similar to OEM as far as I'm concerned. Quality of Internal electronic components ? Dont know yet.. Made in China not always means bad quality. Iphones are made in ? So, to follow.
2 - Then I bought RGB Daytime running lights in february. Total failure. Unable to "connect" the device at all. I am an IT guy so ...tried eveything I know in order to make it work. No chance. LED controller box DEFECTIVE. The fact that we cannot "deactivate" startup animation and some interesting colors are ILLEGAL at least here in Canada has changed my mind to install this product. Quality of fabrication ? So..So... LOW. Lots of gaps and slots.... Not sure it would have really been IP67....standards.
3 - Bought NORMAL item (Animation White-then Blue-Then finally White) Drl in february. Startup animation was Ok. BUT the sequential ORANGE turn signal feature didn't work correctly. Lights stayed FIX SOLID ORANGE. No movement at all. Wenzhous Yechen Auto Parts engineers said was first time this type of problem... ;) Ask for a REFUND...last week.
I really appreciate the detailed explanation of your experiences. I’m sorry you weren’t satisfied with the DRLs. Mine have been perfect for me, but being an electronic device, they can malfunction. It sounds like you know that already 😅. I hope it works out for you in the end!
I wasn't able to get mine to work either -- the control unit/box is definitely defective on these. It seems like the earlier units (which the uploader received) worked, and then anything after a certain date was defective.
@@MrAlexDelarge I’ve heard of some of the modules being defective. But thankfully, I’ve also heard of the manufacturer or seller replacing the module with a new one. So I’d start there and see if that’ll fix your issue.
@@Grey3IS Agreed. I went through two separate units and gave up when the second one failed too. Refused to connect my phone and the lights didn't turn on at all, so a pretty serious fault/failure on the module level. I'm looking into the non-RGB version from HCMotionz or a Chinese retailer instead of Tanso.
@@MrAlexDelarge Ahh, I understand. HCmotionz is the manufacturer for the Tansowerkz DRLs (and for everyone else). The main difference of Tansowerkz and HC is that Tanso is really good at warranting/ replacing products fast and easily. Like you
mentioned, it might be worth trying a different set of DRLs all together. Tanso offers the non-RGB too if you’re interested. I get if you’re wanting to go with another seller, but it’s all the same product.
You inspired me to get this same vehicle. Now let's see if I can mimic your mods 😁😁😁
Wow! That’s awesome man. I appreciate you and your support. If you ever have any questions, please let me know! 😁🫶
Is there a way to have the turn signal only on the drl instead of having it on both the drl and headlight?
You could just unplug the bulb from your headlight housings. However, you’ll get an error. So, maybe just paint your bulb black? 😅
@@Grey3IS I might just have to do that 😂 thanks for the speedy reply. Just got a 14 is350 2 days ago and been binging your videos
@@reliqinc4879 I love that! Congratulations 🙂.
I just ordered mine last week Thursday, can’t wait to install them just bummed by the amount of wait time but they’re definitely worth the wait
Awesome! You’re going to love them. Yeah, it’s kinda annoying there is a wait time. But like you said, it’ll be worth the wait. I appreciate your support!
How long is the wait time?
@@User_fr3256 They arrive to your door within 40 days of ordering!
@@Grey3IS okay thanks💪🏾
Will these work on a base model 3is? I have a 2014 is250 that im trying to get these on and just want to know if they will fit on it?
Yes, but just a slightly different set will fit your model year! I sell them now too. Shoot me a DM on Instagram, and I’ll make sure you get the correct set. 🙂
@@Grey3IS Sounds good, i sent out a DM on Instagram
Great Video, I was on the fence about ordering these but you definitely answered my questions. I just installed last night and the app is not locating a device to change colors, any pointers on how to get it going?
Hello! Thank you for your kind words. Make sure the vehicle is running and the light stock is turned to low beam (headlights are on), then try to connect to the app. 🙂
If I just keep them white and never use Bluetooth will they still work just fine
@@imglitched4960 Yup! I mostly do the same 🙌.
Mate I love the look of that bonnet scoop.
What brand is it?
It is absolutely awesome.
Just subscribed mate.
I have is 250 f 2013 and is 350 f 2022.
Thank you! It’s from tansowerkz.com . Use code GREY3IS at checkout to save 10% 🙂. It’s the same website that the DRLs and all of my carbon is from.
Ordered mine tonight. Can't wait to get them in.
Awesome! You’re going to love them 🙌
after you installed them did a headlight malfunction system pop up on dashboard? for some reason it shows that on mine
Hmm, no. I’d double check that you plugged all head light plugs back together/ plugged them into the right spots.
@@Grey3IS ok will do. also on the diff patterns im not able to change it to a certain color like you show the light blue when you have it on pattern 70 for some reason.. any tips?
@@benzo7743 Wait, sorry, can you elaborate?
@@Grey3IS so around 13:50 it looks like a turquoise color then around 13:59 it looks like another color? how are you able to change animation color to a different one like you did? on my 70 animation it’s a diff color and can’t set it to like a red
looks dope with the red light
Thank you! I agree 😁
Can’t wait for 14-16 to come out I’m gonna preorder the first day it’s open too😂
Oh yeah! I’ll mention it on my Instagram story as soon as I have any info on it.
Looks amazing!! Thanks for the installation video !
Can’t wait for mine 😎
Thank you! I’m excited for you. They’re going to look great on your IS.
What is the shade of the DRLs? Do they seem to be smoked or are the lenses clear? Thanks!
The lens are clear! The internals are frosted/ white-ish colored.
Does this have a start up animation? I just bought mine, but I kinda just want it for the brighter DRLs and occasional gimmick!
Yes! They do a dancing rainbow animation. And what you explained is exactly how I use them 😄.
Thanks for this amazing video 👍
I've bought the same DRLs, and after installation , the app is not showing the white color in the options .. Do you know how to fix this please ?
You’re welcome! Thank you for watching. I’ve heard from a couple individuals that the white color option isn’t available on the android version of the app. I’m not sure why this is happening. Do you happen to have the android version of the app?
@@Grey3IS Unfortunately, Yes .. thank god it's a software issue 😅🙏
@@Rseye Yessir. I’m sorry, it is a software issue. They haven’t updated the android software recently for some reason. If you find someone with an iPhone, you can actually change them to white from the app on their phone 😄.
Great video! I was wonder if we could use these DRLs as Sequential Turn Signals during the daytime
Thank you! Yes, these DRLs function as full-time sequential turn signals day or night 🙂.
@@Grey3IS Is there additional wiring to headlight Turn Signals for that to be possible
@@xndyh Nothing “extra” needs to happen. It utilized the plug and play plug that goes to the headlights (the grey-ish plug in the video) 🙂.
Can you do that same to the rear lights as well?
@@TheDarkKnight2064 You can get RGB rear lights too now, yes!
Do you have any audio advice or videos . Great content!
Advice for tuning your audio? Or audio systems? All I have at the moment is a Skar Audio ported 10” sub. It’s great! No upgrades for my speakers.
Amazing video as always my man. Greatest 3is ever
Thank you Eric. I truly appreciate that🫶🥺
Dang that’s tight work. Can I change my whole bumper and put it on the 2007 I S250.
Thank you! And I bet you can.
How do I get that tint that you have on your front window? That thing looks amazing. Is there a website where I can buy it?
@@juniorthegreat7564 Thank you! I got it applied with my local tint guy.
What percent tint is on your rear windshield? I've been debating between 5-20% tint on the rear but was concerned I won't be able to see people behind me at night. Great video!
Hey my man! I have 5% on my rear windshield. The higher quality tint you get, the easier it’ll be to see out of it. Regardless you’ll be able to see their headlights behind you, but some nice ceramic tint will allow you to see pretty clearly out of it at nighttime. It’s worth the investment in my opinion. 🙂 Ceramic is also great for keeping heat out, v.s. normal dyed film which is purely for darkness.
@@Grey3IS I have a red is350 and have ceramic all the way around. 20% back and sides and 40% on the whole front windshield and I LOVE it. I always promote the ceramic tint. Also about to install the running lights and pre ordering the rear v2 sequentials. I can't wait. Keep it up.
@@matthewmoore5808 That’s amazing! Ceramic is the s***! Please reach out if you have any questions regarding the install. 🙂 Thank you for your support.
such a clean car btw
Wow where did you get those rear bumber canards!! Looks great
I got them from eBay! They come unpainted and I paint matched them.
Here’s the link:
www.ebay.com/itm/292835134029?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=9nN8UE_5Qb2&sssrc=2349624&ssuid=InDjhPXKRly&var=&widget_ver=artemis&media=COPY
Fit 2022 IS 500 FSP? Driving, I'll checkout the website when I get to my destination...
Unfortunately no. The DRLs for the 2020+ are integrated into the headlight. They aren’t a separate housing, like these.
What I like you to show us how to install led strips underneath of the car and light up simultaneous with puddles light from mirrors. Basically I like to see these lights on when I approach the car. Thank you
Oooo that would be cool! I don’t have LED strips under my car, so maybe if I end up installing them in the future I’ll make a video about that. 🙂
@@Grey3IS I don't know the color of the wires to power up the puddle lights if I know I would route those wires from hardness on the floor to body plug.
@@northstar5405 Yeah, I’m not sure either.
This is a fantastic video. I bought the drl from Tansowerkz but don’t know the application…Can you please tell me the name of the app?
Thank you! Here’s the link for the app:
apps.apple.com/us/app/%E5%85%89%E5%A5%94%E8%B7%91%E5%90%A7/id983155504
Could you change the colors for the start up animation. Does it always have to be RGB?
That’s just the animation it’s stuck with 🫤
@@Grey3ISgreat video man, so just to be clear..you can’t change the start up animation to just solid white like OEM?
@@adriansimpson8079 Correct. These are stuck with this start-up animation.
Definitely need the DRLs for the 2015 Model
They’ll be available in the near future 🥳🙌
i assume you saw they released them, but my 2014 ones just came in and Im going to try and install them tomorrow and Monday. 🙏🏾
@@CammyWammy1227 hell yea I installed mine yesterday
Hey do you know how to disable the rainbow animation that pops up when you unlock the car?
To my knowledge, you cannot turn it off. Please let me know if you find out how to though 😅.
They look gorgeous
Thank you! 🫶
Those fog lights look cool, where did you get them from?
Thank you! I manufacture and sell them 🙂. Please DM me on Instagram (grey_3is) for inquiries.
Anyway to change the animation when you lock and unlock the car? I hadn’t seen anything.
Unfortunately no. I believe it can only be the chasing rainbow animation.
bro thats the turn off for me😂 i dont want my car looking like mario kart every time i wanna go inside of it
Have you had issues with the app not letting you change the lights when the car started and it just stays in the default white
Make sure your low beams (head lights) are on, or have your headlights are all the way off! To bypass this, for auto during the day, turn off daytime running lights in your infotainment light settings. 🙂
Thanks for the video install bro help me alot. But can you help me with something?
when i start my car, i can't change to solid colors or different modes. But when the car is shut off and i turn on the DRL manually that's when the car is off then theyll
change the modes and colors. I don't know is it like that because driving Purpose. Thanks in advance
Awesome!
To change colors when the engine is on, you have to have your headlights on or have them all the way off. To bypass that, to have them running on DRL mode, you can go into your lighting settings and turn off “DRL”. They will now be able to change colors whenever during driving.
@@Grey3IS thannnkssss brooo. Didn't expect it to be that simple. Worked just like you said. Thanks for the fast reply.
@@mikeyang5635 Awesome! And you’re welcome 🙂.
Do you know if you can keep the colors changed while in drive? I just installed these drls but once you’re in drive it keeps going back to the color white.
Hello! If you turn your lights all the way off, or turn on your low beams while driving it’ll show the colors. If your lights are in DRL mode, it’ll be white. If you want it to show colors even when in DRL mode, go to your light settings (in your infotainment) and turn off the daytime running light function. They’ll not show white anymore until you manually set them to white in the app. 🙂
Have u had any issues with connecting the app
It’s been pretty dang good for me! Make sure your headlights are turned on when you’re trying to connect. (Also make sure you have the RGB ones)
Hi ! Can I ask you where did you get this front lip from?
Hello! It’s linked in the description. It comes black, but I paint matched it 🙂.
So cool!!! I wished they make them for the 2015 model 😍 I want them 😑
Thank you! Luckily they are in the works. There should be a 2014-2016 set coming out in the near future.
@@Grey3IS awesome, can’t wait I really like these. Also thanks for taking the time to make these kind of videos. Your car is super nice 🙌😍
@@Yana8811 You’re welcome! I appreciate your kind words and support. 👊
I just installed but only my turn signals work my app loses connection and won’t change the color of them any tips ?
Hmm.. I’d make sure that the connection to the module box is fully connected/ secured.
Do you know how much horse your making? Just curious to see what these guys can get up to with the proper treatment, and with your tunes do you notice anything different in lag
Hey there! I’m making approx. 306hp and 374tq to the wheels. I felt a significant different in the turbo lag and power produced by the tune. The Downpipe was another mod that I felt a decent change from. Someone just recently put the Muchboost upgraded turbo in their 200t and it should be making 300++hp now!
@@Grey3IS preciate you bro, wish I had a Lexus community near me ain’t got no one to learn shit with 🤣
@@GoyardGlo For sure! And I’m sorry man.
@@Grey3IS which mid pipe did you get ? I’m running a remark axle back for the exhaust
@@Marcusfigs I have the midpipe that comes as part of the Armytrix valvetronic catback system 🙂.
Super helpful. thanks for posting!
For sure! Looking forward to seeing them on IG 🥰.
Hi, is it possible that this is some universal RGB driver, and could be controlled with a dedicated device instead of an App? would be nice to have something on-board. Second question: you normally drive with them set to white and change colors on parkings etc? I presume it is not possible to customize welcome animation, when you first start?
I’m not sure if there is a way to use a universal remote or some kind to control them. There has to be a way to match the frequency that the app provides, I just don’t know how. And yes, I usually keep mine white while driving. And unfortunately no, you cannot customize or turn off the start up animation (to my knowledge).
is there any codes on the dash because of the one connector on the right side not being used?
Nope! I believe the connector you’re referring to is one that wasn’t being used in the first place.
what is the app called? how do you connect the lights to your phone??
It’s through Bluetooth! Here’s the link to the app:
apps.apple.com/us/app/%E5%85%89%E5%A5%94%E8%B7%91%E5%90%A7/id983155504
@@Grey3IS thanks for the fast reply, i checked your description after i commented lol. anyways is it easy to connect the bluetooth and use all the colours? i haven’t seen a single video talking about the app and how to connect it to your lights
@@WHATIFBIRDSCOULDFLY Of course! And oh yeah. Super easy.
I have the NON RGB version. ive noticed when i set my headlight knob to AUTO setting and the headlights switch when it get dark or driving under a tunnel on the DRL animation happens. Does this happen with yours? I now drive with headlights in manual mode to stop the animation occurring multiple times
Yes, it would happen because the DRLs are getting “power” to them at that point. To stop that from happening, you can turn off daytime runnings lights in your infotainment to fix this.
I watched this video yesterday... Tanso released the part for the 14-16 model today.... I got them and I am blaming you for it
😄😄 You’re going to love them. 🥰
Mine just came in today. Can't wait to install them
@@70malcolm Awesome! Let me know how you like them 🙂
I just installed mine today and i cant stop playing around with all of the modes lmao 😂
@@idarxko I love that 😁
I just got these. Installed , but they don’t change color on the app, can you help me see if I did anything wrong or do I have to have my lights on a certain way?
Hmm, try manually turning your low beams on. Or turn your headlight stalk all the way off.
@@Grey3IS okay yes that worked , how do I get it to stay on one color ? 😔
@@raphaelmendiola4245 You should be able to tap one of the solid color options, then it’ll stay that color.
@@Grey3IS okay that’s the only thing not working im gonna have to look into it 😔😔
@@raphaelmendiola4245 you need to turn off DRL lights in the OEM settings in your screen
Any idea why mine only turn white when I turn off headlights but with my cars lights switched to auto they are fully customizable?? ☹️
Hello! The customization ability happens when your headlights get power to them or when the headlights and DRLs are off (when the car is on). When the car is off, you can switch the light stock to DRL mode to enable customization.
ordered mine on 11th hope they come soon!
Awesome!! I hope they do too 😁
I recently installed these myself. I have ended up with a little gap where the bumper meets the fender. Any tips on avoiding that?
Unfortunately, the 3IS’ bumper tabs get worn out the more you take off & on the bumper. It’s knows as “bumper sag”. There’s not too much you can do about it unfortunately. This is a common issue amongst all IS’.
@@Grey3IS Thanks for the info!
Do they make is for 2022 IS350 f sport?
@@jamengo494 Unfortunately no. But I highly recommend checking out WiseDetailz on Instagram. He’s done it many times before.
Nice vid I'm new to the channel thanks for the content and help on the upgrade
Thank you! I appreciate your support. 🙂
Hi mate, is there a startup animation? Can you customise it?
Also, does it work like OEM where it is bright during the day and dims down automatically at night?
Also, how do you get the turn signal to be at the same speed as these sequential ones? Thanks in advance
Hello! Yes, there is a start up animation. It is a rainbow dancing animation for like 1 second. No, you cannot change it or turn it off (to my knowledge). And the lights stay the same brightness unless you change the brightness via the app. The DRLs match the speed of your OEM turn signals automatically 🙂.
Does the changing animation speed in app affect the startup animation? Such that you can make startup faster and less noticeable?
Do the drls stay on after unlocking the car?
@@brian3787 No, the animation speed in the app doesn’t affect the start-up animation. And for unlocking the car, the DRLs function like OEM. They turn on when applicable (like if it’s nighttime and your lights are on auto).
@@Grey3IS awesome, these look great. Will definitely try them out soon.
Wjy dont they have this for the same gen older years?
These are still very new, so they’re only out for 17-20 right now. But in the near future they will be available for 14-16!
What's the app required to change the lights? The box didn't come with it
The box comes with instructions that have the QR to download the app. But here’s a link!
apps.apple.com/us/app/%E5%85%89%E5%A5%94%E8%B7%91%E5%90%A7/id983155504
Just installed mine, mine only change colors when I turn my headlights on, when it’s on auto they are just oem color. Do you possibly know why that can be?
Not sure why but mine do the same. The headlights have to be on. So either turn them on with the light stock or put them on auto at night time. But a follower of mine just told be that you can turn your light stock to the OFF position and still change the colors of the DRLs. I have yet to try this though.
Jordan does your app have white color option on there?
@@martinthomas5282 yes it does
Darn mine doesn't and I reached out to them and no luck. I wonder am I the only one with out white light option.
@@martinthomas5282 Yes! Mine does. One of my followers DM’d me and showed me that their app didn’t have white as an option. I thought that was funky. If you pause the video where I show the app, you can see where my white option is.
Btw! If you have your headlights switched to DRL (or auto during the day) they will show white (while the car is running).
Make one for 4IS Please!
Since the DRL is in the headlight, it would have to be a whole headlight replacement. There are people that do custom additions of RGB DRLs for the “4IS”, including wisedetailz on Instagram. Here are some he did:
instagram.com/p/Cp8HK5ApICc/?igshid=MzRlODBiNWFlZA==
there a vid to figure out the app? it’s always white. modes worked, and then now it goes to white when i changed the number
I don’t believe so. But you can only change the colors of it if your light stock is switched to off or if your headlights are on. If the stock is switched to DRL, then they will display white.
@@Grey3IS ahhh 😂 yk i feel dumb now. such a simple fix. thanks for the response
Does your car have to be on to have the rgb lights on?
Nope! Just turn your light stalk to DRL mode with the car off.
Sweet! That doesn’t drain you battery?
@@eliassanchez5152 It does just use your battery yes, but it’s all LED so it doesn’t take much.
where did you get the lights for your steering wheel?
The LED shift lights are an option when customizing a carbon fiber steering wheel! I’ll drop the link below. You can mess around with the wheel customization and kinda see what I mean. Also, you can use code GREY3IS at checkout to save 10%!
tansowerkz.com/product/carbon-steering-wheel/#material
What's the name of the app? These look amazing but I want to make sure the app isn't doing some shady stuff on the side.
I totally get that! If you have the ability to see what it’s doing “internally” I’d love to know! It has a Chinese name, but you scan a QR code to download it. If you DM me on insta, I can send you the QR!
How do I connect it to the app tho it won’t let me
@@sivx8836 Make sure your headlights are tuned on!
(Also make sure you purchased the RGB ones 😅)
Is it possible to turn off the opening function?
To my knowledge, no.
Beautiful 3is!
Thank you so much.🫶
How long did it take for these to arrive for you? I ordered them about 2 weeks ago still no ship notification
Interesting, it should take about 2 weeks or so depending on the amount of orders that they get. Maybe DM them on instagram 🤷♂️
Have they arrived yet or are you still waiting? I ordered mine about a week ago and hoping they come soon…
@@jakemoy993 I recommend contacting Tansowerkz via email or Instagram DM to ask for more info about your order.
@@jakemoy993 order them from ebay, hcmotionz is the distributer. Youll just be paying tansowerkz as the middle man, same lights but youll spend 100$ less
@@Grey3IS Will do, thanks!
Where you get the front logo ?
It’s the OEM emblem with vinyl tint over it! Here is the tint that I used 🙂
www.ebay.com/itm/302570215663?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=LfNlqsXiRpS&sssrc=2349624&ssuid=InDjhPXKRly&var=&widget_ver=artemis&media=COPY
How did you connect the light to the app Bluetooth wise ?
Make sure your headlights are on, hop in the app, select the code that pops up (that will be your DRL’s specific code). Then you should be all set.
What it no DRL specific code appears it does go through the whole color start up sequence but it isn’t being picked up Bluetooth wise
@@johnathannyumah8823 Hmm. Make sure the engine is on, the headlight stick is manually switched all the way to low beam, then check the app. Lmk if it still isn’t working.
Yeah so apparently the lights use a different app called happylighting for the 2018 model at least instead of the one you used. Just a little head up for anyone else who comes across this
@@johnathannyumah8823 That’s funky.. it’s not light runner? Where did you purchase them from? Maybe they changed something. Because the 2017-2020 should all be the same.
Is this all plug and play? i didnt want to splice any wires ahahahah
Yes! Thankfully it is 😁. I didn’t want to either
Do the RGB colors work on auto during daytime?
Yes! You just have to switch off “daytime running lights” in your infotainment. 🙂
@@Grey3IS I have to adjust the settings in my head unit? Lol lemme go see
@@xav264 Yes
@@Grey3IS didn't work bro. Just cut power from the lights lol. Can't even connect Bluetooth
@@xav264 The lights don’t power on at all? It should make them not white anymore, then allow you to change the colors. Make sure the car is running.
I ordered these and used your code and it’s going on 2 weeks and they still haven’t shipped yet
That’s awesome! Thank you. I recommend reaching out to tansowerkz and asking for an ETA. They’re pretty quick at responding to Instagram DM’s.
@@Grey3IS so I just got mine and got them installed. They were working fine but now when I set them to a certain color it won’t show the color when I’m driving but when I turn the car off the color that I put will shine until they time out
@@tlvckey1103 Ahh, gotcha! So, for them to show color (and not just white DRL mode) while driving, you have to have your headlights manually turned completely off or have your low beams on (either manually turn them on or leave it on auto at night time). If you have it on auto during the day or on DRL mode while the car is running, it will default to white DRL color. You can also turn on just the accessory mode (pressing the start/stop button twice), then turn your light stock to DRL. You’ll then be able to change the colors (during a show or whatever). 🙂
@@Grey3IS thanks man appreciate it
Are the different colors kind of dim in direct sunlight? I just got mine installed and was kind of expecting them to be a bit brighter with the different colors. At night time obviously this isn’t the case, but specifically at like midday in direct sunlight it’s kind of hard to see the colors
Fantastic video by the way! Your commentating is very nicely done and your videos are just really easy to watch. Good stuff man!
Hello! I appreciate your kind words and support 🙂. And I agree. They aren’t the brightest in direct light/ during the day. That might be partially due to the “frosted” lens.
@@Grey3IS yeah I think you hit it on the nose, gotta be the frosted lens. That’s ok though, the white is still so bright even during the day it’s still an improvement
Side question: is your roof wrapped black? Or is it just the normal nebula pearl?
@@wesleycarter3690 Yes, my roof is wrapped in gloss black! 🙂
@@Grey3IS it’s sick man, my car looks very similar to yours so I know you got good taste. Subscribed for sure!
@@wesleycarter3690 I appreciate you!
Are these compatible with the '15 RCF?
Unfortunately no. Just the IS.
Loved this vid style,
Thank you!
do yours switch back after turn signaling
They do the sequential signal, then go back to whatever you had them at before signaling.
Are these lights illegal at all? I don’t wanna buy them and get pulled over 😭
Just run white while driving!
i wish thee was more lighting mods for the GS like on the IS lol
I totally get that.
@@Grey3IS ya IS is SICK tho bro!!!
@@woBsquared Thank you!!
hello Gr3y, is there one for 4IS?
Hello! No. Since the “4IS” has the DRL build into the headlight, it’s not going to be as cheap and easy to make it RGB. You’ll need to have a custom light builder/ modifier custom add RGB lighting to your DRLs within your headlight.
@@Grey3IS oh icic, i guess i will stick to the OEM!
ty!
Damn bro that goes hard asf
Thank you man!! 🫶
What’s the app called brother?
It’s called Light Runner. Your lights should come with a QR code to download it. If you can’t find it, shoot me a DM on Instagram.
Did you get both for $390? Or each one separately come for that price?
Hello! They come as a set for $390. You get everything you need to install them and be ready to go 🙂.
@@Grey3IS really appreciate it man
What is the name to the app for the drls my wife deleted the app on accident on android
Here’s the link:
apps.apple.com/us/app/%E5%85%89%E5%A5%94%E8%B7%91%E5%90%A7/id983155504
Any idea what it is for android
@@sjgomez79 If you DM me on Instagram (grey_3is), I can send you a pic of the QR code.
can you change the drl light when your headlights arent on ?
DRLs or headlights need to be on in order for the lights to connect to the app to make changes. If not connected then no changes can be made. Hope that helps
Yes! You can change them while your light stock is in the off position. Or, while the car is off, you can put your light stock to the DRL position, then you can change the colors.
@@supr3me47 You can also change them while your light stock is switched to off (with the car on), or while the light stock is switched to DRL (with the car off).
When my car is on and I turn the light stock down to the off position I still cannot change the color, only when I have the lights in the full on position, any tips on this ?
How long did they take to come in the mail?
About a week 🙂
These look sick
Thank you! 🧡
Do you ever have problems with the app? I just installed mine and it seems like the app is always have problems for me 🙃
Oh man! I’m sorry. No, it has been pretty solid for me. Just have to make sure your headlights are on for the app to connect. That’s about the only thing!
@@Grey3IS yeah I have them on but the app disconnects or won’t change the colors sometimes. I’ll figure it out lol
What's the app called? You didn't say and I've lost the instructions. Ahhhhhh!!!
Oh man! I’m sorry. There was a QR code for it on the instructions. Anyway, here’s the link to it:
apps.apple.com/us/app/%E5%85%89%E5%A5%94%E8%B7%91%E5%90%A7/id983155504
Need these for the 2014 3is 😭
They should be out in the near future 😓
where can i get fog lights for 2018 gs 350
Not too sure my man. I recommend checking eBay. 🙂
Sweet ride!
Thank you! 🫶
Hey can turn the DRLS to the orignal stock white color as well??
AND
Can you still use the stalk to turn on/off the DRLS??
Yes, you can make them white. It’s even brighter than OEM too! You can also adjust the brightness to your liking. And yes, you can turn on and off the DRL’s with the light stalk like OEM.
@Grey 3IS appreciate it..thinkin of doin this to my
18 GS F-SPORT
@@showstoppa01 You’re welcome! I hope they come out for your model soon 🙌
Hi, what App do you used ?
@@mannymorales1843 apps.apple.com/us/app/%E5%85%89%E5%A5%94%E8%B7%91%E5%90%A7/id983155504
Need these for 2014 3IS
They should be available in the near future!
Whats the @ for the mini vinyl company?
@@MOREBEATSTV @minivinylco 🙂
I got mine last week but have you got pulled over or anything like that cause the cops be bugging where I’m from 😏
I haven’t. But I also hardly drive around with them changing colors or especially not red/ blue.
Love your videos tho bro ❤️
When I go to order it says custom color and I have to write something, what is that for ?
Interesting. That doesn’t sound right. Let me try it
Yeah.. that’s weird. I would just put N/A (not applicable). And see if they email you regarding your order. I think it is a mistake on their part. Don’t forget to use code GREY3IS to sage 10% 🙂
@@Grey3IS thank you!!
are you gonna start selling the triple beam fog lights
I sure am! I am planning on announcing how to place orders pretty soon on my Instagram story 🙂
The fog lights are now for sale! Please DM me on Instagram (grey_3is) for inquiries 🙂.
Do they indicate
Yes! Sequential signals.
It’s really to bad tanso werkz got shut down 😢
@@CaseCloud97 Hmm, not sure what’s up with them. I don’t think they officially stated that they’re shut down yet.
Anyway, feel free to reach out to me for anything. I sell mostly everything that they sold too. 🙂
Apparently Tanso was sold and the new owner is incompetent at best, fraudulent at worst. Not fulfilling orders after payment, abandoned their website/domain, etc. Steer clear from them at this stage.