I went to college on a level 2 tiling course at construction college I have watched two of your videos and got more knowledge in 10mins than 2yrs at construction college thank you sir you are an amazing man and a fantastic teacher
Wow, that's quite something. Thanks so much for that. It's not always easy churning out these videos but comments like yours are key to me keeping it going 👍🏻👊🏻👏🏻
Man all your trying to do is help people and tremendously helped me. You don’t have to explain yourself to the know it alls. If they know it all why are they watching a video that’s helping us new diyers! They have nothing better to do than sit around and watch videos they don’t need since they know how to do it all. Drives me nuts people doing that. This was a great video so thank you for helping us newbies!!!
TBF if you read a comment and it's pointing out a problem then there's nothing wrong with the comment. Its how you deal with the comment that makes the difference. In my opinion the uploader handles them brilliantly.
The attention to detail in your videos really sets your Channel apart. I can watch one of your vids and know what to do instead of scrolling hours of others and not being sure. THANKYOU:)
Brilliant video. Have to give you credit for humility in accepting criticism. You have responded in an ideal way: no offence, an explanation of reasons without defensiveness and you leave the viewer with the ability still to choose for themselves. Great videos. Love your work!
Aw, thanks Chris. I really appreciate that! It's a learning process for us all. I was reading something last night that was saying that millennials can't do DIY, reeling off a list of DIY gaffs from electrocuting yourself to breaking things, and I had pretty much done all of them at some time or other.
US DIYer here. Really enjoyed the video, plenty of people are scared of working on their homes because of how guarded the knowledge is. I appreciate these videos because directions for these types of simple tasks are assumed, but there is always room for learning new/different techniques and/or tips. I, for one, started caulking without cutting the tube open for the longest time and just cutting the plastic tip and cranking down on the caulking gun until it burst open. I had wondered for a long time if it was supposed to be that difficult to do, but I didn’t realize you needed to do both because most tubes don’t tell you how to access the product properly (on most construction/maintenance products). It was only after watching something on YT that I discovered how foolish I was, and I am less concerned about doing a caulking job around the home. Thanks for all you do!
UK pro here. I chuckled at your comment about guarded knowledge. I have a firm dislike for any tradesman that think they possess some kind of dark knowledge that only they possess. That's BS.
Honestly your videos are amazing and I have succeeded in my first try at siliconing a bathtub for my brother just by watching your videos!! Thank you very much!!
Charlie DIYte For sure! I’m trying to redo my sisters bad silicone job and while working on it I noticed that water has gotten in behind the skirting and tub, is it a bad idea to silicone over it or is there a way to remove the moisture? I would really appreciate some tips! Thanks again for you awesome vids!
I sometimes get capable DIYers asking me to do jobs for them. I've been running a property maintenance company for 15 years. I'm happy to say that the only difference between me and them is I've probably done the job before therefore I probably know a few tips and tricks that they might not. I'm always happy to offer help and advice to DIYers. You've given quality in-depth advice here. Thanks for your video I picked up a few tips here. Caulk shrinks by 1/3 From applied to dry. so leave it a little proud when wet.
I love how you also research and share tool sources from various countries. I'm so used to seeing RUclipsrs from the U.S. and occasionally U.K that I tune out but then I could suddenly relate when you made an Australian reference to Bunnings Hardware stores which are everywhere downunder (and have seen such caulking tools there)
Thanks, I appreciate that. Yes I'm conscious I don't really pay enough attention to my audience outside the UK. It was going through the comments of my last caulking video that I was struck how many people chipped in give buying recommendations around the world so I resolved to thank them by passing on their excellent recommendations. Going forward I'll do this whether I can, but the problem is without local knowledge in each country it's very difficult to know what I should recommend, as generally the products can be very different from one country to another 👍
I enjoyed the detail in this video. I haven’t done a lot of caulking myself, but when I did some on a project I was doing, I experimented with a couple of ways of finishing. One way that gave good results was pushing the caulk along. Took a little practice to keep the pressure on the gun steady so the caulk flowed at a constant rate. I cut the tip at 45°, then squeezed the caulk out a bit to get started, then slowly pushed the tip along keeping just a little of the caulk visible at the tip. The back part of the cut nozzle then basically formed a concave bead automatically. I usually needed to finish it a bit with my finger or a tool, but there was very little waste.
Until this and previous video, I never got good results with silicone but bought the full set of profile tools and the results were awesome. Don't believe other videos that use finger and detergent - this guy knows his stuff and follow his advice, you won't be disappointed.
Using the finger technique I always do my first run with my smallest finger as it's a small radius followed by a second run with my index finger, this just cleans any excess left above and below the joint without touching the joint as it's a larger finger with a bigger radius. Try it , it really does work. Great video by the way.
Thanks so much for the advice. As I didn't have your special tool, I used the slightly wet finger technique. But it was your simple tips that really helped, eg aiming for one neat line of caulk, releasing the tension in the gun - what a revelation - and having a bin to hand. Thanks.
Hi Charlie, I always go 90° and keep all internals true as possible....all properties are subject to seasonal movement and minor touch ups are quick to do if required...Gap filling foam and wood filler are an alternative too......I also find it much easier to cut in, all looks sharp and clean to the eye....for deeper areas you can use backer rod foam (polycord) and then caulk on top which prevents excessive shrinking....👍
@@CharlieDIYte Hi Charlie, I try not to use caulk as much as possible. Check out the 'Painter and Decorator' channel....ruclips.net/channel/UCYcLWMq51P0rTj7eIee5lTQ, where he demonstrates alternative methods. As you state, we all have our preferred methods and aspire to produce the best result/finish. You have done an amazing job transforming your property 👍
I'm a lady new to construction and have been watching some of your videos. Really learning alot and appreciate your energy and passion. Boxing in next for me x
I bought the Cramer tool having viewed your previous video. It's turned into one of those tools I bless each time I use it (like today!). I really appreciate your videos.
Was talking about caulking with my wife and then this video showed up. Thought Google was listening to my conversations. Excellent video as always. Learn so much or shall I say find out all my existing mistakes 😁
Thanks Mehdi. Sometimes I wonder about that! I was chatting to a guy that works with me on the motorway about the time Ian Botham ran out Geoff Boycott and sure enough when I got home, it was a suggested video on my RUclips feed...
Ive never liked using caulk or silicon because of the amount of waste, mess, and poor finish. Charlie is fast becoming the go to place for advise. The profiling tool changed all this and now i get the finish im looking for without the mess. Thanks Charlie....keep up the good work :)
Excellent tutorial Charlie. So, so useful! Just about to tackle some very irregular skirting boards, and been putting it off 😂. Know EXACTLY what I need to do now, you covered every issue and step perfectly👌
Thanks for this video Charlie, I found your channel several years ago as someone recommended your Ultimate Siliconing video in a forum somewhere and I often find myself watching your videos for help on various bits of DIY. I always love your very detailed videos and tutorials, and admire your reception to constructive criticism from viewers. It shows you have a real professional and mature outlook in life, and always trying to improve yourself. Keep up the great work!! 🙂
Aw, thanks Nigel, really appreciate that. Yes it's a funny old game this and increasingly difficult to make money from but comments like that really help 👊
You're very welcome. Really glad you found it useful and thanks for the comment. There's a corners video too, which you might need bit.ly/3c7SKio Great surname, by the way 😉
Thanks for this video Charlie, this has helped me so much. I used the information here to remove the old sealant between our kitchen skirting board and re-applied it with the tools and tips in your video. I could never have done this without your youtube videos. Thanks!
I followed your silicone video with my new Cramer tool and what an amazing finish. I now feel armed and ready to caulk down the stairs. Thank you so much for your no nonsense unbiased videos! 👍
I would also like to add a comment, DONT hurry. Its not going to set for hours. Crank your favourite tunes, have beer or wine before starting, this will help your fear of failure. If it looks like crap, never admit that you are the DIYer. If it looks professional, say you learnt everything from You Tube, then wait for their reaction. Priceless!
Brilliant vid, cheers Charlie, I'm a serious diyer and I'm refurbishing a 1960's council flat, now I know it's going to look great when finished 👍👍👍👍👍🤞🤞🤞🤞🤞🤞
So helpful for a newly single lady who was married 22 years and need to learn on the double how to fix all those outstanding jobs that are bugging me. Thank you!!
Really chuffed you're finding my vids useful and thanks so much for the comment. Sorry to hear about your situation, but sounds like you're doing all the right things and DIY is so good for the soul. Take care 👍
Thank you so much! I am so new to this (and clueless) I didn’t even realise I needed a caulking gun to go with the caulk I bought. I’ve just got one and a profiling tool. Thank you for making the process very clear and straightforward! I’m always amazed and grateful people who know how to do this stuff take the time to make videos and show the rest of us.
I only just discovered today that you can get 'Dripless' caulking guns - which automatically release pressure on the end of the tube as your finger leaves the trigger!!! Looks like a good upgrade... could save a lot of mess and fuss...
Great videos. I've done my fair share of DIY sealing and caulking in my time and all using the finger technique. Your videos on these subjects have shown me how to improve significantly, especially with the use of the scraper tools (which I've now ordered). I particularly like the way you refer to other countries during your video, which I'd imagine is a great help for them. Don't often see that in foreign posts referring to the UK.
Thanks buddy, I really appreciate you taking the time to send that 👍 The tools available in other countries is something I'd like to refer to much more often, but it's not always possible because they can vary wildly from one country to another. Here though by trawling through the comments I was able to find recommendations from people in Australia and the US.
@@CharlieDIYte The downside of course, is that you dont want the video to be long and boring, spending too much time referring to what other countried have or do. I think you have the right mix.
After making an average job of siliconing my kitchen tiles/worktop I had a look at this video. Hindsight says, find a RUclips video to see how it should be done then undertake the task, not the other way around. At least now my new skirtings will look amazing! Off to by the Cramer profiling kit. 👍
I have done my shower and a small room. Not finished yet, intended to use the Cramer, but ended up using a mixture of both particularly in the small room. Great advice, it provided me with the confidence to try, not rush and not worry if I messed up. It’s not everyday you get to thank ‘Colin Firth’ for DIY advice - Thank you 😃
Ha, thanks Robin. I think I prefer the Colin Firth analogies, to the TV chefs (Floyd and Ramsay) who I'm normally compared to 🤣 Really glad to hear you sorted it, and you're absolutely right, a combination of techniques often works best. 👍🏻
@@CharlieDIYte Ah yes, I hear the voice and intonation of Floyd and Ramsey but you do look like Mr Firth, however please please promise us you’ll spare us skimming a wall in a wet silk shirt!
Hi charlie. Very informative video. Thanks. As I have all makita 18v tools i recently bought their caulking gun. Not cheap at 200 pounds but oh so good. Constant pressure via the motorised screw with the trigger. No having to reload the trigger halfway through a run on as per a manual gun. Only drawback is its size. Slightly bulky for small spaces
Thanks Russell - that's really interesting as I was taking to someone on this Comment feed this morning about the Makita gun. I'm going to have to have a play with one of these at some stage.👍
Fantastic advice. Caulking around some patio doors today. I'd prefer a profile tool, but only room for a finger. Thanks for the mention on the correct way to pull the profile tool. I did wonder about this!
Always buy from a builders or decorators merchants it much less expensive than a diy store here in the uk. Also if you come across poorly applied unsightly caulk that has been done by others in the corners, take it out and do again. It can not be sanded down. Get the finish right before going on to the next area.
Very useful information, thank you. One snag I met was after cutting off the top of the calking stuff I found the tube was too long for either of my guns :) Nearest DIY store is 13 miles away so I tried cutting off the other end manually pushing the plunger in. Made rather a mess and have a longer gun on order before I start on the next tube of compound.
Thanks so much. Good luck with the new place. Exciting times - and that's pretty much where and how I started on my DIY journey. Drop me a line if you ever need any tips 👍🏻
i got that forming tool for caulking my bathroom and its really a gamechanger for me who just do this occasionally - thanks for the recommendation and demonstration
Hi Charlie, over the years (now considerable -46 of them!) I've found your tips and hints have saved me so much time and cash where I'd have otherwise had to go through the usual trial and error in numerous projects. Many thanks and keep up the great work - Paul :)
Same age, mate 👊🏻 I really appreciate you taking the time to tell me that. I'm humbled that people find my vids useful. It really makes all the filming and days of editing worthwhile. Thanks 👍🏻
If you really want to save cash than I would not waste money on unnecessary caulking on every little gap and line or whatever. This guy wastes way more than he used and nothing was knifed so nothing was Sealed
Kramer tool was a total game changer. Went from terrible silicone beads to perfect! Top tip on sanding profiles! Mine are def on their way out. This’ll give them a bit of a new lease of life.
We were fitting large large skirting in an old house and because of undulating walls there were some large gaps. We also found caulking cracked when dry. We bought the cheapest adhesive on Amazon and it work a treat. 15 years later, good as new.
I have successfully used an old credit card, either as is, or with the corner trimmed to provide the right size of angled bead. It works well with both silicone and caulk. As you mentioned, the corners on the tools available to buy tend to be too big for most situations. Also, it's a good money saver! JB
Good work, John! I've used a credit card in the past. I guess it just doesn't leave quite such a clean line or clean the residue off the wall as well, but if it works for you, can't argue with that 👍
Literally finished decorating my lounge last week and the skirting is the last to go on. 120 yr old Victorian house with 144mm tall skirting. Found this video absolutely blinding! Charlie, you're a legend mate and I can't thank you enough for the wealth of info you provide. I even bought the profiling kit you did, so I can't wait to us it. Keep up the great work!
Hi mate, I love comments like this, they keep me fired up and remind me why I'm doing this! That's the best news, buddy, and you're very welcome. Thank YOU for taking the time to comment 👍👏 The profiling kit won't disappoint and I'm posting a vid this weekend on siliconing behind taps, so keep an eye out for that! Also, make sure you watch my corners vid if you haven't already, as I didn't cover corners properly in the big silicone vid ruclips.net/video/EErbuodMOAM/видео.html
Hope that you aren’t wet tooling caulking in every unnecessary place in your Victorian home like this flim flam man is. Wet tooling and making videos of it!!!
Thanks Charlie. Found your video on skirting boards, and followed up with this. Scary prospect having never done these before, but your tutorials are really helpful, especially as you discuss the pros & cons of the alternatives and essential requirements. My top tools were the bucket of water, toilet roll and wet finger! Thanks again. R.
I personally think Charlie the profile caulking tools is the best to get that professional finish thanks for sharing this information with us found it very useful.
I rounded off an old bank card and it seemed to work very well. Handy if you don’t have a lot of caulking to do and buying a specialist tool is not really required.
The suggestion of using gap adhesive has been brilliant !! We have a 1905 victorian terrace with the usual wonky walls and floors, it has made the gaps between the wall and skirting invisible and provided that extra needed support/adhesion.
Great video! Thank you. I watched 3 times to ensure I got all the details I needed to proceed firmly in my head and the results are great. My first time caulking skirting boards in the bedroom. By time I get to downstairs in new house will be a dab hand at it. 😁
Great video. Concise and well explained. Better than the US ones I've watched. You've a great voice and no - hard to listen to - accent! I've subscribed and will be watching other vids. Thanks a lot
Great in depth video Charlie on one of the most frustrating jobs for the DIY’er. I came across the Kramer tool a few years back and love it. I know people in the trade frown upon it - but like you say unless you are doing this day in day out, we need the tools to help us. A friend who is a glazier fitted a new front door for me last week. I watched in awe as he siliconed round the frames in minutes, just using the nozzle and a quick finger swipe. I’ll stick to the Kramer! Thanks for comparing all methods in the detail that you did. Cheers.
Thanks Darren. Yes you might struggle with the Kramer on outdoor brickwork. I'll always use the tool where possible though because the joint is so much stronger at the edges than when you use a finger.👍🏻
Another great video, I always screw and plug skirting then ,take them off number each piece on the back with a sharpi , prime with crown acrylic primer/undercoat , then refit use grip adhesive and screws, it will never move and be closer to the wall , minimum caulking which I always touch up with BIN ,so no reaction with emulsion
Watched a few of your videos tonight. Really brilliant. Seems like i'm doing everything right so far, but also picking up some handy tips along the way. Cheers!
Well, I ended up painting offices now hardly used because of Covid. I have never used caulking, but was supplied with all the paint. I decided to just give it ago and of course the bead was uneven and lumpy. Not happy with that I ran my finger along and it looks amazing. I didn’t release the gun though and thanks for that tip and others you have shared.
Cheers Charlie, brilliant video as usual . I'm about to re-decorate a swathe of the house and I've got my Cramer kit on order! Previously I'd used my finger which was ok (ish) on the caulk but I made a right hash of the silicone in the bathroom so I'll be re-doing all that too.
I had the opposite problem to you Charlie where my old cob walls were straight at all. This meant when the skirting was hard up against the wall there were places where there were 10-12mm gaps. I used instant plaster filler from Screwfix and it doesn’t shrink at all. Applied the same way with a tool. You can sand it if need be.
The profiling tool also helps prevent any injuries to your finger tips if there happens to be a stray splinter or any sharper edge along the work line which I found out the hard way lol.
nice video I would also add that the tool used for caulking it save your finger from wear and splinters that is so easy to encounter especially working on timber.
Thanks Martin. I'm pretty thin skinned unfortunately but thanks to people like you, and to the wife, who goes through the really nasty stuff in the folder which Google filters out for review, it doesn't bother me. Some criticisms are pretty valuable as a checks and balances to what I do. The arbitrary thumbs down or the "this video is rubbish" without bothering to say why, just amuse me, and occasionally, when I get gently trolled, like I did after my first silicone video, it makes me think "sod you, I'm going to prove you wrong" and 2.4million views later on the following video, I think I have 😉
At first... People have own opinions and in free country you have right to free speech. Second thing is constructive criticism what motivate RUclipsrs to make better and better videos. At last... How would I know is this content trustworthy if noone would verified? There's to much bullshit on YT and all over Internet, so I don't watch content below 75% positive opinions and I won't buy product below 4/5 stars, but its me...
brilliant, I love your attention to detail...great learning. One thing that stood out is that "its easier to cut in" with a radius profile rather than 90 degrees. I've just been scraping plaster out of internal corners thinking it would be easier to paint up to a defined point (painting a feature wall in dark colour). I'd be glad to have your further thoughts on this
Opinions differ but it is definitely harder to cut in to a 90 degree angle, because the paint wants to leave the brush and deposit itself on the other surface if you so much as touch it. At the end of the day though it comes down to aesthetics. What look do you prefer 🤔
Brilliantly useful and educational video Charlie! Thank you so much for all of the detailed demos. This will really help me to get a more professional finish to my current DIY jobs. Thanks ⭐️🌟⭐️
Thanks for posting. So helpful as always. With regard to your Abigail Ahern pro tip, I’d like to recommend 2 you tube series with tricks & techniques for making your space look bigger & more cohesive without the need for costly extensions/renos. Design rules Lawrence Llewelyn Bowen (yes, him!). The series focuses on the principles of good design (ignore the taste as this series was made in the nineties & just focus on the techniques) & Lisa Holt, an American professional interior designer, who does a range of videos but the ones re making a space look bigger Q&As are pure gold. Lastly, I recommend the actual Farrow & Ball shops (not DIY stockists) because they often employ art students who understand where the light hits the room & how to maximise that. I had an ugly outside wooden wall structure which stuck out like a sore thumb. I was quoted £500 to remove it. They recommended a colour which made the wall completely disappear!
A good instructional video, well done! It is worth priming all woodwork to be painted when it arrives on site and priming all over. Then if there is a bit of dampness in the wall behind the wood has some protection. Regards Keith
Good point Keith. I should have mentioned that in the skirting video that preceded this one. In my case, being upstairs there's no damp to worry about.
Would always foam large gaps first/sand then fill/caulk at end, prevents movement and cracking massively overfilling bit holes with anything else will eventually crack
Great video! Just moved into a new build and now the prospect of filling the impending shrinkage cracks by myself doesn't seem nearly as daunting, maybe even a bit exciting to try!
Thank you very much Charlie for your very good video’s. i would like to mention, That I wouldn’t use gripfil at gap filling a skirting board as i used to it and when you overpaint it the stays tacky and it seems to go a shade of yellow. I tried this a few times when i was younger, But now use either flexi fix or Gripbond pro for sticking skirtings to the wall and use the evo stik caulk your using for along the tops of skirtings.
Great video Charlie. It’s giving me some great pointers. What about caulking between the boards and the flooring? Our 45 year old house has parquet flooring on the ground floor and having renovated it, it has left some gaps. Should I caulk between the floor and the skirting? Thanks?
Hi again Charlie, Thank you for your reply. Unless the makers of gripfil have changed the ingredients these days, But i stuck my skirting on with gripfil in the 1990’s and any that out of large gaps at the top of skirting was left to set for a few days then undercoated and glossed with dulux gloss, But after a few days of drying the gloss still remained tacky and turned yellow.. only where the gripfil was. From now on i will always test a small area first, But these days, manufacturers have had to reduce or remove the solvents ingredient in their products to make them more user friendly. try a test piece and let me know if it has changed..👍🏻
I went to college on a level 2 tiling course at construction college I have watched two of your videos and got more knowledge in 10mins than 2yrs at construction college thank you sir you are an amazing man and a fantastic teacher
Wow, that's quite something. Thanks so much for that. It's not always easy churning out these videos but comments like yours are key to me keeping it going 👍🏻👊🏻👏🏻
Please keep up the videos they are brill
that means colleges are a complete waste of time and money !!
College is meaningless I know guys who never went to high school and they are way smarter than any engineer or architect in this country
You learn more in the real world than polytechnic or college!
Humility is one of those underrated personality traits that is essential for a great teacher
👏👍 I've been through too much in life to pretend to be anything I'm not. Take it or leave it is my mantre.
Humility speaks volumes.
Man all your trying to do is help people and tremendously helped me. You don’t have to explain yourself to the know it alls. If they know it all why are they watching a video that’s helping us new diyers! They have nothing better to do than sit around and watch videos they don’t need since they know how to do it all. Drives me nuts people doing that. This was a great video so thank you for helping us newbies!!!
Thanks so much for this - comments like yours are why I've kept on doing this over the years. Really chuffed you find my vids useful 👊
TBF if you read a comment and it's pointing out a problem then there's nothing wrong with the comment. Its how you deal with the comment that makes the difference. In my opinion the uploader handles them brilliantly.
The attention to detail in your videos really sets your Channel apart. I can watch one of your vids and know what to do instead of scrolling hours of others and not being sure. THANKYOU:)
Thanks, really appreciate that. Thank YOU for taking the time to comment - it means a lot 👊
Such a thorough and clear demonstration of each of the techniques and results you were describing. Thanks so much for offering your experience!
The level of detail, such as 'The dust trap' is excellent and really appreciated 👍
Thanks, I really appreciate the comment👍🏻
What I love about this video is the practical tips on not leaving a mess, which is usually a major issue for me. Thanks for that.
You're welcome buddy. Thanks for the comment!
@@CharlieDIYte No prob, my wife thanks you too :)
"No one is going to scrutinize your caulk..." So true! I have to tell myself over and over that no one will notice these things but me...
Once it's done and painted, that's pretty much the last time it's looked at (particularly if you're skirtings are cleaned as rarely as ours 🤣).
Brilliant video. Have to give you credit for humility in accepting criticism. You have responded in an ideal way: no offence, an explanation of reasons without defensiveness and you leave the viewer with the ability still to choose for themselves. Great videos. Love your work!
Aw, thanks Chris. I really appreciate that! It's a learning process for us all. I was reading something last night that was saying that millennials can't do DIY, reeling off a list of DIY gaffs from electrocuting yourself to breaking things, and I had pretty much done all of them at some time or other.
As a former teacher and instructor I can honestly say that video was EXCEPTIONAL!
Thank you .
Thanks so much 👊
I've only recently discovered this channel but I'm slowly binging the lot. I'm no newbie but still learning so much -- thanks Charlie!
Thanks Nick, can't thank you enough for all the bingeing, and I'm humbled that you've found them useful given what you already know 👍🏻👊🏻
US DIYer here. Really enjoyed the video, plenty of people are scared of working on their homes because of how guarded the knowledge is. I appreciate these videos because directions for these types of simple tasks are assumed, but there is always room for learning new/different techniques and/or tips.
I, for one, started caulking without cutting the tube open for the longest time and just cutting the plastic tip and cranking down on the caulking gun until it burst open. I had wondered for a long time if it was supposed to be that difficult to do, but I didn’t realize you needed to do both because most tubes don’t tell you how to access the product properly (on most construction/maintenance products). It was only after watching something on YT that I discovered how foolish I was, and I am less concerned about doing a caulking job around the home.
Thanks for all you do!
UK pro here. I chuckled at your comment about guarded knowledge. I have a firm dislike for any tradesman that think they possess some kind of dark knowledge that only they possess. That's BS.
Well you are the best!! The tips and tricks are so numerous that the time flys by! Length of the video is a non issue! Thanks!
That Kramer kit has done wonders for my caulking. No fuss, no mess and a great finish. Thanks, Charlie!
Glad to hear it. It's awesome isn't it! 👍🏻
Honestly your videos are amazing and I have succeeded in my first try at siliconing a bathtub for my brother just by watching your videos!! Thank you very much!!
Tessa, that's the best news, thanks so much for letting me know! My next video is how to silicone behind taps, so keep your eye out for that 👍
Charlie DIYte For sure!
I’m trying to redo my sisters bad silicone job and while working on it I noticed that water has gotten in behind the skirting and tub, is it a bad idea to silicone over it or is there a way to remove the moisture? I would really appreciate some tips! Thanks again for you awesome vids!
I sometimes get capable DIYers asking me to do jobs for them. I've been running a property maintenance company for 15 years. I'm happy to say that the only difference between me and them is I've probably done the job before therefore I probably know a few tips and tricks that they might not. I'm always happy to offer help and advice to DIYers.
You've given quality in-depth advice here. Thanks for your video I picked up a few tips here.
Caulk shrinks by 1/3 From applied to dry. so leave it a little proud when wet.
Thanks John, I really appreciate that, plus the point about the caulk. 👍
The Cramer silicone tool is one of the most effective tools I've ever bought, thanks for the recommendation in your silicone video Charlie.
That's great to hear. It's awesome, isn't it! Cheers Stephen 👍
i was using a old credit card :D works brilliant ;) or any other plastic card
Having just moved home and replacing a lot of skirting this has been invaluable (4 years on from this update). Thanks Charkie
I'm so chuffed you found it useful - thanks for letting me know 👊
I love how you also research and share tool sources from various countries. I'm so used to seeing RUclipsrs from the U.S. and occasionally U.K that I tune out but then I could suddenly relate when you made an Australian reference to Bunnings Hardware stores which are everywhere downunder (and have seen such caulking tools there)
Thanks, I appreciate that. Yes I'm conscious I don't really pay enough attention to my audience outside the UK. It was going through the comments of my last caulking video that I was struck how many people chipped in give buying recommendations around the world so I resolved to thank them by passing on their excellent recommendations. Going forward I'll do this whether I can, but the problem is without local knowledge in each country it's very difficult to know what I should recommend, as generally the products can be very different from one country to another 👍
Typos now corrected 🤣
I enjoyed the detail in this video. I haven’t done a lot of caulking myself, but when I did some on a project I was doing, I experimented with a couple of ways of finishing. One way that gave good results was pushing the caulk along. Took a little practice to keep the pressure on the gun steady so the caulk flowed at a constant rate. I cut the tip at 45°, then squeezed the caulk out a bit to get started, then slowly pushed the tip along keeping just a little of the caulk visible at the tip. The back part of the cut nozzle then basically formed a concave bead automatically. I usually needed to finish it a bit with my finger or a tool, but there was very little waste.
Until this and previous video, I never got good results with silicone but bought the full set of profile tools and the results were awesome. Don't believe other videos that use finger and detergent - this guy knows his stuff and follow his advice, you won't be disappointed.
You are indeed the caulking king. I have already done a few home jobs after watching you.
Thanks, chuffed you've found the vid useful
Using the finger technique I always do my first run with my smallest finger as it's a small radius followed by a second run with my index finger, this just cleans any excess left above and below the joint without touching the joint as it's a larger finger with a bigger radius. Try it , it really does work. Great video by the way.
Nice! Using nature's tools. 👍🏻
Thanks so much for the advice. As I didn't have your special tool, I used the slightly wet finger technique. But it was your simple tips that really helped, eg aiming for one neat line of caulk, releasing the tension in the gun - what a revelation - and having a bin to hand. Thanks.
Hi Charlie, I always go 90° and keep all internals true as possible....all properties are subject to seasonal movement and minor touch ups are quick to do if required...Gap filling foam and wood filler are an alternative too......I also find it much easier to cut in, all looks sharp and clean to the eye....for deeper areas you can use backer rod foam (polycord) and then caulk on top which prevents excessive shrinking....👍
Fair point Nicky. That would be my preferred solution if it wasn't for the cutting in. How do you get round that?
@@CharlieDIYte Hi Charlie, I try not to use caulk as much as possible. Check out the 'Painter and Decorator' channel....ruclips.net/channel/UCYcLWMq51P0rTj7eIee5lTQ, where he demonstrates alternative methods. As you state, we all have our preferred methods and aspire to produce the best result/finish. You have done an amazing job transforming your property 👍
I'm a lady new to construction and have been watching some of your videos. Really learning alot and appreciate your energy and passion.
Boxing in next for me x
I bought the Cramer tool having viewed your previous video. It's turned into one of those tools I bless each time I use it (like today!). I really appreciate your videos.
Thanks mate. It's awesome, isn't it! Thanks for the comment 👍
Was talking about caulking with my wife and then this video showed up. Thought Google was listening to my conversations. Excellent video as always. Learn so much or shall I say find out all my existing mistakes 😁
Thanks Mehdi. Sometimes I wonder about that! I was chatting to a guy that works with me on the motorway about the time Ian Botham ran out Geoff Boycott and sure enough when I got home, it was a suggested video on my RUclips feed...
Ive never liked using caulk or silicon because of the amount of waste, mess, and poor finish. Charlie is fast becoming the go to place for advise. The profiling tool changed all this and now i get the finish im looking for without the mess. Thanks Charlie....keep up the good work :)
Thanks Richard. It's a fab tool, isn't it 👍🏻
@@CharlieDIYte its just so nice getting the finish that I expect. Also - getting a better quality caulk gun/applicator is a worthwhile game changer.
Excellent tutorial Charlie. So, so useful! Just about to tackle some very irregular skirting boards, and been putting it off 😂. Know EXACTLY what I need to do now, you covered every issue and step perfectly👌
Glad to hear it David. Thanks so much for getting in touch and good luck with the skirting 👊
Thanks for this video Charlie, I found your channel several years ago as someone recommended your Ultimate Siliconing video in a forum somewhere and I often find myself watching your videos for help on various bits of DIY. I always love your very detailed videos and tutorials, and admire your reception to constructive criticism from viewers. It shows you have a real professional and mature outlook in life, and always trying to improve yourself. Keep up the great work!! 🙂
Aw, thanks Nigel, really appreciate that. Yes it's a funny old game this and increasingly difficult to make money from but comments like that really help 👊
There’s NOTHING PROFESSIONAL ABOUT WET TOOLING AND FINGER TOOLING AND TAPING AND SO MANY OTHER THINGS THAT ALL THESE UTUBE WANKERS ARE DOING
Who knew! Thank you, Charlie for introducing me to the world of caulking. Without doubt you're going to save me time and money.
You're very welcome. Really glad you found it useful and thanks for the comment. There's a corners video too, which you might need bit.ly/3c7SKio Great surname, by the way 😉
This video is brilliant, thanks! First time caulker here feeling a lot more confident about the task at hand
Thanks so much for that. Best of luck and let me know how you got on. 👍🏻
Thanks for this video Charlie, this has helped me so much. I used the information here to remove the old sealant between our kitchen skirting board and re-applied it with the tools and tips in your video. I could never have done this without your youtube videos. Thanks!
That's great news Paul, thanks for letting me know. Really chuffed you found it useful 👊
I followed your silicone video with my new Cramer tool and what an amazing finish. I now feel armed and ready to caulk down the stairs. Thank you so much for your no nonsense unbiased videos! 👍
HOW DID YOUR STAIRS GO Wayney?
I would also like to add a comment, DONT hurry. Its not going to set for hours. Crank your favourite tunes, have beer or wine before starting, this will help your fear of failure. If it looks like crap, never admit that you are the DIYer. If it looks professional, say you learnt everything from You Tube, then wait for their reaction. Priceless!
Brilliant vid, cheers Charlie, I'm a serious diyer and I'm refurbishing a 1960's council flat, now I know it's going to look great when finished 👍👍👍👍👍🤞🤞🤞🤞🤞🤞
Thanks Martin - always humbled by comments like that. Good luck with the rest of the refurb, and keep me updated 👍
So helpful for a newly single lady who was married 22 years and need to learn on the double how to fix all those outstanding jobs that are bugging me.
Thank you!!
Really chuffed you're finding my vids useful and thanks so much for the comment. Sorry to hear about your situation, but sounds like you're doing all the right things and DIY is so good for the soul. Take care 👍
Thank you so much! I am so new to this (and clueless) I didn’t even realise I needed a caulking gun to go with the caulk I bought. I’ve just got one and a profiling tool. Thank you for making the process very clear and straightforward! I’m always amazed and grateful people who know how to do this stuff take the time to make videos and show the rest of us.
You're very welcome Catherine. You're embarking on a wonderful, empowering journey. Good luck and drop me a line if you ever need any help 👍
You're a great teacher, I feel like I can do this :) I have so many upgrades and repairs to do, glad I found your channel :)
Thanks so much. You can - it's all about the research and prep. Let me know how you get on. 👊
I have used acrylic caulk around trims about 2 years ago. Very pleased with the results. Acrylic caulk does not shrink and you can paint over it.
I only just discovered today that you can get 'Dripless' caulking guns - which automatically release pressure on the end of the tube as your finger leaves the trigger!!! Looks like a good upgrade... could save a lot of mess and fuss...
Great videos. I've done my fair share of DIY sealing and caulking in my time and all using the finger technique. Your videos on these subjects have shown me how to improve significantly, especially with the use of the scraper tools (which I've now ordered). I particularly like the way you refer to other countries during your video, which I'd imagine is a great help for them. Don't often see that in foreign posts referring to the UK.
Thanks buddy, I really appreciate you taking the time to send that 👍 The tools available in other countries is something I'd like to refer to much more often, but it's not always possible because they can vary wildly from one country to another. Here though by trawling through the comments I was able to find recommendations from people in Australia and the US.
@@CharlieDIYte The downside of course, is that you dont want the video to be long and boring, spending too much time referring to what other countried have or do. I think you have the right mix.
The finger technique that’s hilarious Just don’t ever do that shit if you are a real caulker or you will be fired
After making an average job of siliconing my kitchen tiles/worktop I had a look at this video. Hindsight says, find a RUclips video to see how it should be done then undertake the task, not the other way around. At least now my new skirtings will look amazing! Off to by the Cramer profiling kit. 👍
Thanks Nigel, I appreciate the comment. Yes, you won't regret that purchase at all. It's a phenomenal bit of kit!
Thanks Charlie, really helpful well explained session, Tried it and it worked a treat. Very satisfying after 50 years of DiY frustration.
I have done my shower and a small room. Not finished yet, intended to use the Cramer, but ended up using a mixture of both particularly in the small room. Great advice, it provided me with the confidence to try, not rush and not worry if I messed up. It’s not everyday you get to thank ‘Colin Firth’ for DIY advice - Thank you 😃
Ha, thanks Robin. I think I prefer the Colin Firth analogies, to the TV chefs (Floyd and Ramsay) who I'm normally compared to 🤣 Really glad to hear you sorted it, and you're absolutely right, a combination of techniques often works best. 👍🏻
@@CharlieDIYte Ah yes, I hear the voice and intonation of Floyd and Ramsey but you do look like Mr Firth, however please please promise us you’ll spare us skimming a wall in a wet silk shirt!
Great video- never expected a full run down if all the techniques and pitfalls! Thanks!
Thanks David. That's how I roll, but I massively appreciate that 😉👍
Hi charlie.
Very informative video. Thanks.
As I have all makita 18v tools i recently bought their caulking gun. Not cheap at 200 pounds but oh so good. Constant pressure via the motorised screw with the trigger. No having to reload the trigger halfway through a run on as per a manual gun.
Only drawback is its size. Slightly bulky for small spaces
Thanks Russell - that's really interesting as I was taking to someone on this Comment feed this morning about the Makita gun. I'm going to have to have a play with one of these at some stage.👍
Fantastic advice. Caulking around some patio doors today. I'd prefer a profile tool, but only room for a finger. Thanks for the mention on the correct way to pull the profile tool. I did wonder about this!
Always buy from a builders or decorators merchants it much less expensive than a diy store here in the uk. Also if you come across poorly applied unsightly caulk that has been done by others in the corners, take it out and do again. It can not be sanded down. Get the finish right before going on to the next area.
Very useful information, thank you. One snag I met was after cutting off the top of the calking stuff I found the tube was too long for either of my guns :) Nearest DIY store is 13 miles away so I tried cutting off the other end manually pushing the plunger in. Made rather a mess and have a longer gun on order before I start on the next tube of compound.
I learn so much from these videos which has helped with my own d.i.y. attempts, thanks!
You're very welcome. So glad you find them useful and thanks for the comment 👍🏻
Your videos are awesome. Moving into our first house on Monday and all of your tips are so useful. Big respect
Thanks so much. Good luck with the new place. Exciting times - and that's pretty much where and how I started on my DIY journey. Drop me a line if you ever need any tips 👍🏻
i got that forming tool for caulking my bathroom and its really a gamechanger for me who just do this occasionally - thanks for the recommendation and demonstration
It's great, isn't it. Thanks for the comment 👍🏻
Thank you Charlie. I'm happy to have a go at caulking now - and have never heard of it before. But need to know as Im tackling a very old house.
Thanks Chris. Good luck and drop me a comment if you have any questions.
Hi Charlie, over the years (now considerable -46 of them!) I've found your tips and hints have saved me so much time and cash where I'd have otherwise had to go through the usual trial and error in numerous projects. Many thanks and keep up the great work - Paul :)
Same age, mate 👊🏻 I really appreciate you taking the time to tell me that. I'm humbled that people find my vids useful. It really makes all the filming and days of editing worthwhile. Thanks 👍🏻
If you really want to save cash than I would not waste money on unnecessary caulking on every little gap and line or whatever. This guy wastes way more than he used and nothing was knifed so nothing was Sealed
Kramer tool was a total game changer. Went from terrible silicone beads to perfect! Top tip on sanding profiles! Mine are def on their way out. This’ll give them a bit of a new lease of life.
We were fitting large large skirting in an old house and because of undulating walls there were some large gaps. We also found caulking cracked when dry. We bought the cheapest adhesive on Amazon and it work a treat. 15 years later, good as new.
Yep good strategy 👌
Great video charlie.
Glad you mentioned to use the smooth side i was confused as to which way it should be used until i saw your silicone video
You're welcome. The Cramer Profiling Kit5 has a little instruction book on the front which I got that visual from, but I agree, it can be confusing.
I have successfully used an old credit card, either as is, or with the corner trimmed to provide the right size of angled bead. It works well with both silicone and caulk. As you mentioned, the corners on the tools available to buy tend to be too big for most situations. Also, it's a good money saver!
JB
Good work, John! I've used a credit card in the past. I guess it just doesn't leave quite such a clean line or clean the residue off the wall as well, but if it works for you, can't argue with that 👍
Literally finished decorating my lounge last week and the skirting is the last to go on. 120 yr old Victorian house with 144mm tall skirting. Found this video absolutely blinding! Charlie, you're a legend mate and I can't thank you enough for the wealth of info you provide. I even bought the profiling kit you did, so I can't wait to us it. Keep up the great work!
Hi mate, I love comments like this, they keep me fired up and remind me why I'm doing this! That's the best news, buddy, and you're very welcome. Thank YOU for taking the time to comment 👍👏 The profiling kit won't disappoint and I'm posting a vid this weekend on siliconing behind taps, so keep an eye out for that! Also, make sure you watch my corners vid if you haven't already, as I didn't cover corners properly in the big silicone vid ruclips.net/video/EErbuodMOAM/видео.html
Hope that you aren’t wet tooling caulking in every unnecessary place in your Victorian home like this flim flam man is. Wet tooling and making videos of it!!!
Thanks Charlie. Found your video on skirting boards, and followed up with this. Scary prospect having never done these before, but your tutorials are really helpful, especially as you discuss the pros & cons of the alternatives and essential requirements. My top tools were the bucket of water, toilet roll and wet finger! Thanks again. R.
You're very welcome, Richard. Really glad you found it useful and many thanks for the comment👍
p.s. The results were great, much better than I could have hoped for. Excellent in fact - Made me feel proud! R.
I personally think Charlie the profile caulking tools is the best to get that professional finish thanks for sharing this information with us found it very useful.
Thanks Ratch - good to hear from you 👍
I rounded off an old bank card and it seemed to work very well. Handy if you don’t have a lot of caulking to do and buying a specialist tool is not really required.
The suggestion of using gap adhesive has been brilliant !! We have a 1905 victorian terrace with the usual wonky walls and floors, it has made the gaps between the wall and skirting invisible and provided that extra needed support/adhesion.
My house is 1909, solid but not a straight line in it.
Great video! Thank you. I watched 3 times to ensure I got all the details I needed to proceed firmly in my head and the results are great. My first time caulking skirting boards in the bedroom. By time I get to downstairs in new house will be a dab hand at it. 😁
Yey, that's great news. Fantastic work, and many thanks for letting me know 👍🏻👊🏻
Great video. Concise and well explained. Better than the US ones I've watched. You've a great voice and no - hard to listen to - accent! I've subscribed and will be watching other vids. Thanks a lot
Thanks Caz. Really appreciate that. Thanks for the sub. Great to have you on board. 👊
Great in depth video Charlie on one of the most frustrating jobs for the DIY’er. I came across the Kramer tool a few years back and love it. I know people in the trade frown upon it - but like you say unless you are doing this day in day out, we need the tools to help us. A friend who is a glazier fitted a new front door for me last week. I watched in awe as he siliconed round the frames in minutes, just using the nozzle and a quick finger swipe. I’ll stick to the Kramer! Thanks for comparing all methods in the detail that you did. Cheers.
Thanks Darren. Yes you might struggle with the Kramer on outdoor brickwork. I'll always use the tool where possible though because the joint is so much stronger at the edges than when you use a finger.👍🏻
Great video and super helpful, just to double check you say it’s best to caulk after priming/undercoating?
Another great video, I always screw and plug skirting then ,take them off number each piece on the back with a sharpi , prime with crown acrylic primer/undercoat , then refit use grip adhesive and screws, it will never move and be closer to the wall , minimum caulking which I always touch up with BIN ,so no reaction with emulsion
Yep, that is the bells and braces approach that I massively approve of 👍
Watched a few of your videos tonight. Really brilliant. Seems like i'm doing everything right so far, but also picking up some handy tips along the way. Cheers!
Thanks Richie, I really appreciate that 👍🏻
Just resealed my en-suite shower tray using a profiling kit......brilliant, thanks Charlie 😊👍
You're very welcome. They're awesome bits of kit aren't they👍🏻
Well, I ended up painting offices now hardly used because of Covid. I have never used caulking, but was supplied with all the paint. I decided to just give it ago and of course the bead was uneven and lumpy. Not happy with that I ran my finger along and it looks amazing. I didn’t release the gun though and thanks for that tip and others you have shared.
Brilliant video again Charlie, going to tackle my skirtings with the same tool over lockdown.
Thanks!
Awesome. Good luck Allan!
This is great Charlie, thanks. I realize I use them same techniques, but a couple of really useful tips here, thanks 🙏
Really appreciate the comment Karl. Glad you found it useful 👍
Cheers Charlie, brilliant video as usual . I'm about to re-decorate a swathe of the house and I've got my Cramer kit on order! Previously I'd used my finger which was ok (ish) on the caulk but I made a right hash of the silicone in the bathroom so I'll be re-doing all that too.
You're very welcome Sharon. You'll love that kit. Good luck with the silicone and caulking. Let me know how you get on. 👊
I had the opposite problem to you Charlie where my old cob walls were straight at all. This meant when the skirting was hard up against the wall there were places where there were 10-12mm gaps. I used instant plaster filler from Screwfix and it doesn’t shrink at all. Applied the same way with a tool. You can sand it if need be.
Good work there. 👌
Thanks for this video. Just moved house and fitting skirting and coving. Learnt lots from this. I'm a plumber but hopeless at decorating etc 😆
Thanks Colin. Really chuffed you found it useful. Get the Cramer kit for the siliconing in the day job. Real game changer 😉
The profiling tool also helps prevent any injuries to your finger tips if there happens to be a stray splinter or any sharper edge along the work line which I found out the hard way lol.
nice video I would also add that the tool used for caulking it save your finger from wear and splinters that is so easy to encounter especially working on timber.
Honestly dont know why people post negative comments on RUclips. Your opinion doesnt matter. Learn to accept that.
Thanks Martin. I'm pretty thin skinned unfortunately but thanks to people like you, and to the wife, who goes through the really nasty stuff in the folder which Google filters out for review, it doesn't bother me. Some criticisms are pretty valuable as a checks and balances to what I do. The arbitrary thumbs down or the "this video is rubbish" without bothering to say why, just amuse me, and occasionally, when I get gently trolled, like I did after my first silicone video, it makes me think "sod you, I'm going to prove you wrong" and 2.4million views later on the following video, I think I have 😉
At first... People have own opinions and in free country you have right to free speech.
Second thing is constructive criticism what motivate RUclipsrs to make better and better videos.
At last... How would I know is this content trustworthy if noone would verified?
There's to much bullshit on YT and all over Internet, so I don't watch content below 75% positive opinions and I won't buy product below 4/5 stars, but its me...
Best video!! Love the passion! I’m completely new to home improvement and this rocked my socks. Greetings from Australia :))
Thanks so much. So chuffed you found it useful and thanks for letting me know 👊
brilliant, I love your attention to detail...great learning. One thing that stood out is that "its easier to cut in" with a radius profile rather than 90 degrees. I've just been scraping plaster out of internal corners thinking it would be easier to paint up to a defined point (painting a feature wall in dark colour). I'd be glad to have your further thoughts on this
Opinions differ but it is definitely harder to cut in to a 90 degree angle, because the paint wants to leave the brush and deposit itself on the other surface if you so much as touch it. At the end of the day though it comes down to aesthetics. What look do you prefer 🤔
Brilliantly useful and educational video Charlie! Thank you so much for all of the detailed demos. This will really help me to get a more professional finish to my current DIY jobs. Thanks ⭐️🌟⭐️
You're very welcome. Thanks for the comment 👍🏻🙏
Thanks for posting. So helpful as always. With regard to your Abigail Ahern pro tip, I’d like to recommend 2 you tube series with tricks & techniques for making your space look bigger & more cohesive without the need for costly extensions/renos. Design rules Lawrence Llewelyn Bowen (yes, him!). The series focuses on the principles of good design (ignore the taste as this series was made in the nineties & just focus on the techniques) & Lisa Holt, an American professional interior designer, who does a range of videos but the ones re making a space look bigger Q&As are pure gold. Lastly, I recommend the actual Farrow & Ball shops (not DIY stockists) because they often employ art students who understand where the light hits the room & how to maximise that. I had an ugly outside wooden wall structure which stuck out like a sore thumb. I was quoted £500 to remove it. They recommended a colour which made the wall completely disappear!
Thanks so much for that. Really valuable comment. I'll check out both of those 👍🏻
A good instructional video, well done! It is worth priming all woodwork to be painted when it arrives on site and priming all over. Then if there is a bit of dampness in the wall behind the wood has some protection. Regards Keith
Good point Keith. I should have mentioned that in the skirting video that preceded this one. In my case, being upstairs there's no damp to worry about.
Really well though through,as ever Charlie. Just done our new porch and did a great job. Thanks for your help. Tinks
Thanks mate. You did the porch!! Serve me some photos on WhatsApp. Would love to see what you did in the end. 👊
Wet tooling is flim flam and dilutes the caulking
The red arrows that you use to illustrate are great. Thanks.
Thanks!
Would always foam large gaps first/sand then fill/caulk at end, prevents movement and cracking massively overfilling bit holes with anything else will eventually crack
I agree - foam works so well in those situations as opposed to grab adhesives like grip fill.
I saw this on another channel where the guy was filling the gaps around a window board, i was amazed at how well it worked!
Great video! Just moved into a new build and now the prospect of filling the impending shrinkage cracks by myself doesn't seem nearly as daunting, maybe even a bit exciting to try!
You wet tool caulking like this flim flam man is doing and those things will just crack again
Very clear and helpful video Charlie - well done and thank you 👍😊👍
Thank you for the great advice once again.
Another brilliant video, Charlie. These videos really are educational and informative
Bout to attempt this soon, ordered the tool of your link too. Thanks again for the useful vids.
Thanks mate, I appreciate that 👍🏻
Thanks Charlie, great video. I really like your presenting style as well!
Excellent video, really comprehensive!
Thanks 👊
Thank you very much Charlie for your very good video’s. i would like to mention, That I wouldn’t use gripfil at gap filling a skirting board as i used to it and when you overpaint it the stays tacky and it seems to go a shade of yellow. I tried this a few times when i was younger, But now use either flexi fix or Gripbond pro for sticking skirtings to the wall and use the evo stik caulk your using for along the tops of skirtings.
Thanks, that's good to know. It's surprising, that, because it's meant to be over-paintable.
Great video Charlie. It’s giving me some great pointers. What about caulking between the boards and the flooring? Our 45 year old house has parquet flooring on the ground floor and having renovated it, it has left some gaps. Should I caulk between the floor and the skirting? Thanks?
Hi again Charlie, Thank you for your reply. Unless the makers of gripfil have changed the ingredients these days, But i stuck my skirting on with gripfil in the 1990’s and any that out of large gaps at the top of skirting was left to set for a few days then undercoated and glossed with dulux gloss, But after a few days of drying the gloss still remained tacky and turned yellow.. only where the gripfil was. From now on i will always test a small area first, But these days, manufacturers have had to reduce or remove the solvents ingredient in their products to make them more user friendly. try a test piece and let me know if it has changed..👍🏻
Thanks for taking the time to make this! Much appreciated
You're welcome, Garviel. Good to hear from you again!
Great info and love how much care you take to cover all the possible queries a DIY'er would have! Nice work!