I like Nate helping you, he could care less about You Tube. His ass is business, he cares about the Dairy. If he talks it is about working and getting the job done. Good man!
Nates a good man , he keeps his nose to the grindstone and locks it in and all the other stuff is just chatter , Andy you are a blessed man to have him on your team
We used to chew up so much fire hose as chief and gear, but in the long run, it save the hoses. We had a lot less blowouts in the field. Worked well got them from the local department decommissioned they couldn't use them.
I like the idea that if the head breaks, you can swap it out quick and keep on trucking! Then fix the broken one in your own time and have it back in service again. Kind of like the old question "why do airplanes have two engines?" lol Thanks, Andy
Glad to see the old cuttin head back up to snuff and upgraded to pert-near brand new status.👌 The grease zirk and them fancy new bolt guards should make that head outlast the chopper.😉 Seems to me that bad money is going to work out just fine.🤙
Antichaffing around the hyd hoses is smart protection, we do that same thing on aircraft hydraulics lines and hoses in chaffing areas with rubber inner tube material and pull ties to hold them in place just like you did it and those large aircraft hydraulics can run at up to 3,000 to 4,000 PSI ! Your rebuilding the choppers feeder head and new spring teeth looks great, hope it lasts you for some years ! On your greaseable bearing you mentioned if they installed a sealed bearing you can blow the bearing seals by greasing too often (pops the seals out).
Preventive maintenance is never a waste of money! Downtime is the waste. Blowing a hose 20 plus miles from home, now you have 40 miles to get a replacement and any fluids that are needed. I made my living doing field repairs.
Maintenance & repair costs are an important part of any well run business to get the best return on the capital investment of equipment. The fact that your dairy operation has skilled employees that are able to work on various pieces of equipment within the workshop as well as in the fields greatly improves the efficiency and saves considerable costs on the projects that you are able to accomplish in house. Your excellent management skills to determine when some repair projects are best suited to be done offsite by specifically trained individuals helps with getting the best value on the endless variety of repair projects. Your videos are an excellent learning tool on what it takes to keep all your various pcs of equipment up and running & minimizing downtime.
A true Preventative Maintenance program is worth its weight in Gold, the internal workings that are not accessible is usually where problems arise , a good mechanics stethoscope can detect bearings before they fail but this is only one aspect of a good PM program that is scheduled and followed but never the less problems can still easy arise, stress cracks that are not visible to the eye is another thing as well as new faulty materials. Its tuff on a farm, scheduling is difficult when your running your equipment is working 12- 24 hrs consecutively. Your doing a great job Andy as well as your team 🇺🇲🚜
My opinion is you are smart to get some use out of those parts before you trade the head with the chopper when you buy a new chopper then you will already have a new head waiting for you n the shed
When you replaced the center bearing the last time did they give you a grease able bearing for a non grease able housing? Could maybe explain the short life of it. For the value of a hay crop or what it ends up costing if you put up poor quality feed a back up plan is always wise
I cannot believe how some portions of the head seem so light-duty considering the punishment they take. I grew up on a farm and I was always amazed that so much of the ag equipment was not up to the duty requirements and was always broke down and/or worn out! But, the equipment was always expensive.
Dry fitting the shaft of the chopper is fine but I have found over the years that with conditions like that tine bar in the moisture and the dirt it is beneficial to apply a ample amount of grease to the bar couplings. just saying !
I endorse your strategy to put the old head back in service. Makes good sense to me to get some pay back from those parts rather than wearing out the new head.
@@Failure_Is_An_Option You change a lot of designs? Are you an engineer? If you are, maybe you should learn how to service and wrench on the stuff you designed! I'm tired of busted knuckles because someone sitting at a laptop decided that 2" is enough space to change a filter that is 3" tall!
You can sell that rebuilt head. Since you have a new head. You shouldn’t need to do anything major to it for a couple of years. But they don’t make things like they used to!
That's an old trick from the manufacturer - the original bearing can't be lubricated because there's no zerk fitting. Driveline bearings were notorious for being like that. Then when you go purchase a new bearing guess what?? You can lubricate the new one because they remembered to add a lube point that you can actually lube!! Of course that bearing is 40 to 50% higher in price then the last time you bought one but at least this time they remembered to add a zerk fitting...
Need more trucks more truck drivers and another 4wd with a degelman blade pushing and packing, one push tractor and one packing tractor can't keep up to two choppers if each chopper worked at about 75% capacity it would work.
@@Otherrandomguy42 We ran two choppers Daria outfit up the road. Actually I think we had one push Tractor I’m not mistaken. 20+ years ago. There was several other tractors there as well
@@MorganOtt-ne1qj more than that 3 cuts minimum a year so it's cutting at least 3000 acres a year Milking 2100 he's definitely doing close 1000 acres per cutting and they cut some fourth cut sometimes I'd guess 3500 or roughly around that acres a year so closer to 22-26000 total acres.
@@Otherrandomguy42 I bow to you doing much better math than me! 🙄I haven't followed but maybe 3 years, and I noodled the best guess in my head. Thanks for giving me more accurate #! 👍👍
I committed about the grease fitting we took the stripper bar off today and greased it and tonight you talked about it and we talked about putting a hole there where you did to get to it
He's likely received comments on the last video of working on this head, that likely say he/ the farm is throwing good money after bad, by fixing it. Mind you I don't agree with that idea.
@@FarmingFixingFabricating I read the guys comment on the last video about you wasted $24k on your combine when could have bought a good used one for less so I know you did here. 😂😂 Not sure how he thought you'd buy a better combine than you have for $24k but I guess he finds good combines for cheap.
Andy you are not throwing money at bad!!!!! The stuff you have last as long as it does Is wonderful!!! That's OLD SCHOOL!!! And in my 45 years old school is the ONLY THING STILL GOING!!!
Might be a direct dig at the clown that commented on the last video that it was a bad decision to put $24,000 into the combine and that he coulda bought a good used one for less. Which was hilarious $124,000 would be bare minimum to buy good used combine these days I guess he thought it's still 1992.
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
Andy
Thank you for sharing the repair with us. I have learned so much
from your videos as they are priceless learning tools.
I like Nate helping you, he could care less about You Tube. His ass is business, he cares about the Dairy. If he talks it is about working and getting the job done. Good man!
he would make an excellent son inlaw
@@mitsnevetsI think they are related in some fashion.
Nates a good man , he keeps his nose to the grindstone and locks it in and all the other stuff is just chatter , Andy you are a blessed man to have him on your team
Self taught heavy duty mechanic/millwright
Don’t mess with Nate, you might miss him!!!
Hello from northern Wyoming, I'm no mechanic. I know just enough to be dangerous. I really appreciate you and one lonely farmer shop videos.
We used to chew up so much fire hose as chief and gear, but in the long run, it save the hoses. We had a lot less blowouts in the field. Worked well got them from the local department decommissioned they couldn't use them.
Hello from Moosomin, Saskatchewan, Canada great videos thanks for sharing with all of us 😊
Enjoyed your video Andy now i understand makes sence to repair old one. Thanks have a good day.
Great video. That combine looks amazing to be 20 years old. She will make it another 20 the way you take care of your equipment.
Great job Andy, always enjoy the shop vids as well as the field footage👍🏻
I like the idea that if the head breaks, you can swap it out quick and keep on trucking! Then fix the broken one in your own time and have it back in service again. Kind of like the old question "why do airplanes have two engines?" lol Thanks, Andy
Glad to see the old cuttin head back up to snuff and upgraded to pert-near brand new status.👌
The grease zirk and them fancy new bolt guards should make that head outlast the chopper.😉
Seems to me that bad money is going to work out just fine.🤙
Antichaffing around the hyd hoses is smart protection, we do that same thing on aircraft hydraulics lines and hoses in chaffing areas with rubber inner tube material and pull ties to hold them in place just like you did it and those large aircraft hydraulics can run at up to 3,000 to 4,000 PSI ! Your rebuilding the choppers feeder head and new spring teeth looks great, hope it lasts you for some years ! On your greaseable bearing you mentioned if they installed a sealed bearing you can blow the bearing seals by greasing too often (pops the seals out).
Preventive maintenance is never a waste of money! Downtime is the waste. Blowing a hose 20 plus miles from home, now you have 40 miles to get a replacement and any fluids that are needed. I made my living doing field repairs.
I like the idea of a 2nd FF&F chapper to add to the operations. This may require more in the way of trucking..
Maintenance & repair costs are an important part of any well run business to get the best return on the capital investment of equipment.
The fact that your dairy operation has skilled employees that are able to work on various pieces of equipment within the workshop as well as in the fields greatly improves the efficiency and saves considerable costs on the projects that you are able to accomplish in house.
Your excellent management skills to determine when some repair projects are best suited to be done offsite by specifically trained individuals helps with getting the best value on the endless variety of repair projects.
Your videos are an excellent learning tool on what it takes to keep all your various pcs of equipment up and running & minimizing downtime.
As always, thank you for sharing. Cheers :)
A true Preventative Maintenance program is worth its weight in Gold, the internal workings that are not accessible is usually where problems arise , a good mechanics stethoscope can detect bearings before they fail but this is only one aspect of a good PM program that is scheduled and followed but never the less problems can still easy arise, stress cracks that are not visible to the eye is another thing as well as new faulty materials. Its tuff on a farm, scheduling is difficult when your running your equipment is working 12- 24 hrs consecutively. Your doing a great job Andy as well as your team 🇺🇲🚜
Hi Andy
Good job everybody at the farm !
Thanks Andy for your time and everybody have a good day at the farm ! 🙋♂️
Another good one Andy 🚜🌽🇺🇸👍
Awesome video thanks for your time and consideration Andy 😎🤠🚛🚜🚛🚜🚜🔧🛠️
My opinion is you are smart to get some use out of those parts before you trade the head with the chopper when you buy a new chopper then you will already have a new head waiting for you n the shed
Andy, you are right "2 heads are better than one"!
Another very interesting video Thank you Andy 😊😊😊😊😊
When you replaced the center bearing the last time did they give you a grease able bearing for a non grease able housing? Could maybe explain the short life of it. For the value of a hay crop or what it ends up costing if you put up poor quality feed a back up plan is always wise
It was a non grease able bearing
Wow. Yes Andy I'm jumping around get caught up on video watching.. I am usually a day late and a Dollar short anyway... lol
Always interesting repairs great video
Good to see that project wrapped up! some projects take a while to finish.
Thanks, Andy, for another great video.
Great Video Andy. Is your Family the biggest Dairy around your parts? Keep up the great work Hello from Central California
No it isn’t
Twenty years is a long time for a hose to.last ❤ 😊
Not on a combine that gets maybe 100 or 150 hours year on it.
Thank you for another Great video. Cheers
The small amount to repair that header is well worth it!
Considering how much a new head costs yep. But that parts bill wasn't small either parts prices are gone crazy.
They say two heads are better than one!
Lots of good work!!!! Enjoy the channel!
I cannot believe how some portions of the head seem so light-duty considering the punishment they take. I grew up on a farm and I was always amazed that so much of the ag equipment was not up to the duty requirements and was always broke down and/or worn out! But, the equipment was always expensive.
Dry fitting the shaft of the chopper is fine but I have found over the years that with conditions like that tine bar in the moisture and the dirt it is beneficial to apply a ample amount of grease to the bar couplings. just saying !
Get a large bottle of Loctite 608 retaining compound for bearing and shafts works great
You have other problems if that is your crutch.
Loctite is used in industrial applications for many years even for parts with proper fitment
Andy, About how wide is that hayhead? Thanks!
I endorse your strategy to put the old head back in service. Makes good sense to me to get some pay back from those parts rather than wearing out the new head.
When I worked on Cat equipment, their saying was " Were not not having problems with it but we changed the design ".
🤣🤣👍
I change a lot of designs. Manufacturing is not static. You see less than 1% of the business. Remember that.
@@Failure_Is_An_Option You change a lot of designs? Are you an engineer? If you are, maybe you should learn how to service and wrench on the stuff you designed! I'm tired of busted knuckles because someone sitting at a laptop decided that 2" is enough space to change a filter that is 3" tall!
Great Vidget 👍👍👍👍🍺🍺
Enjoy your videos Andy!!
Well Andy ya got a new hay head just sitting there does that mean there’s a new chopper coming lol
That equipment it's all good stuff I would fix it too
Always managing the risk.
Are you hinting that a new chopper maybe showing up Andy?
I like the video of that bigtractorpower did put on you chopping alfalfa
That was my uncles chopper
Good thinking Andy no to you if you need if it’s not use ability I see Jared Macks in the other bay 👍🚜
You can sell that rebuilt head. Since you have a new head. You shouldn’t need to do anything major to it for a couple of years. But they don’t make things like they used to!
That's an old trick from the manufacturer - the original bearing can't be lubricated because there's no zerk fitting. Driveline bearings were notorious for being like that. Then when you go purchase a new bearing guess what?? You can lubricate the new one because they remembered to add a lube point that you can actually lube!! Of course that bearing is 40 to 50% higher in price then the last time you bought one but at least this time they remembered to add a zerk fitting...
Its always something
😀🚜👍
Dam good job Andy
They'll pay for there self in the long run 😁
Hmm could we see 2 choppers in corn silage? But that would mean double the trucks so probably not
They are eventually doubling the heard so you need double the feed.
Need more trucks more truck drivers and another 4wd with a degelman blade pushing and packing, one push tractor and one packing tractor can't keep up to two choppers if each chopper worked at about 75% capacity it would work.
@@Otherrandomguy42 We ran two choppers Daria outfit up the road. Actually I think we had one push Tractor I’m not mistaken. 20+ years ago. There was several other tractors there as well
@@Otherrandomguy42 Andy has 3 big tractors with blades and a straight frame that can have a blade on it if he needed
Maybe a cover over the grease nipple would be handy to stop dirt getting in Andy,if not they be a right bxxxxxxd to get grease into.
The entire thing has slots for openings where the tines come through.
Don’t worry to much you can pay in paseos soon
Are you sure
You may have said it previously but about how many acres on the old head?
They are on their 7th yr as with the whole machine
So figure around 8000 acres, my best guess.
@@MorganOtt-ne1qj more than that 3 cuts minimum a year so it's cutting at least 3000 acres a year Milking 2100 he's definitely doing close 1000 acres per cutting and they cut some fourth cut sometimes I'd guess 3500 or roughly around that acres a year so closer to 22-26000 total acres.
@@MorganOtt-ne1qj you have to remember 3 cuttings per year
@@Otherrandomguy42 I bow to you doing much better math than me! 🙄I haven't followed but maybe 3 years, and I noodled the best guess in my head. Thanks for giving me more accurate #! 👍👍
Good idea you have, save the new one
looks the part now that it is rebuilt
Where is Andrew?
You’ll see him
I committed about the grease fitting we took the stripper bar off today and greased it and tonight you talked about it and we talked about putting a hole there where you did to get to it
🇨🇦
How in the world can you throw all the bolts in a bucket and put the right ones back in to the place they came out of??
👍
Your not throwing good money after bad, you're preventive maintenance
I do not get the title on this one. Looks good if it works.
It was meant to be confusing
He's likely received comments on the last video of working on this head, that likely say he/ the farm is throwing good money after bad, by fixing it.
Mind you I don't agree with that idea.
You get to the point where repairs don't add value to the unit. The head isn't there, yet. But some people think it is.
@@FarmingFixingFabricating I read the guys comment on the last video about you wasted $24k on your combine when could have bought a good used one for less so I know you did here. 😂😂 Not sure how he thought you'd buy a better combine than you have for $24k but I guess he finds good combines for cheap.
Yeah they forgot a zero after 24k and it should have been 240k
You pay all these people to work you should keep one of them with you to help with another set of hands
Where would he be without you telling him how to run the operation...
Never ending
Rick MantmTurd here. Complete expert.
Andy you are not throwing money at bad!!!!! The stuff you have last as long as it does Is wonderful!!! That's OLD SCHOOL!!! And in my 45 years old school is the ONLY THING STILL GOING!!!
Might be a direct dig at the clown that commented on the last video that it was a bad decision to put $24,000 into the combine and that he coulda bought a good used one for less. Which was hilarious $124,000 would be bare minimum to buy good used combine these days I guess he thought it's still 1992.
👍
👍