Hi Andy ! Good job cleaning your 2 planters. that 8110 looking very good like a new one . Good job Jerret ! Thanks Andy for your time and everybody have a good day at the farm !
Our Deere mechanic recommended taking the seed tube brushes out and storing them where mice can’t to them. They had a customer left seed in them and the mice destroyed them over winter.
Always something to tinker on. I used to put a liberal amount of windex liquid then put decal or placard on and line it up. Then use a credit card to sllide liquid out from behind and let it dry.Easy way to line up and remove any air bubbles.
Your Son's and Daughter's sure do excellent work in everything they do. . . I do think it time. . . Time for Alex to Shitcan the automatic transmissions and step up to the big leagues and start floating gears on the 18 speed Eaton Fuller RoadRangers. . . .
Andy, with the bolts you put in the Piviot wings, when the hitch pin broke too, just amazing to see that, you put in bolts that weren't long enough / pulling on the thread, which is the weaks part of the inch & a 1/4 bolts. So get longer boths / grade 8's. Sonny Farms had the same problem, they put in hitch pin.
That bolt was a grade 8….. what was in there was a draw pin that broke…. Look at the other side to see what we have in there. We have broke the factory pins on both sides and replaced them with draw pins.
My tractor had a small leak in the hydraulic pipe that ran from one side to the other and back up to a metering valve. So went to a dealer that could find the right piece, well eventually. In order to buy the pipe I had to buy 3 other pipes that I didn't want because they said they couldn't break up the set. A few hundred bucks but it doesn't leak anymore.
Tks for sharing. You keep your leftover seed corn until the next year? You have any problems with it coming up the next year? How about your liquid fertilizer? Jared did a great job with the tractor. Looking sharp. You have any luck with the Anti Seize? If i walk by that stuff i have all over but where i wanted it. Lmao...
Murphy's Law is still active in 2024. If anything can go wrong, it will. The law of selective gravity. The smallest of objects will fall to the least retrievable location.
Cost and Inflation You might consider buying as much seed for next year as you can afford. The cost of seed may be 30 to 50 percent more by this time planting season next year. Think about it.
What exactly is an American worker without a company or a business to actually work for? Everyone you turn around there is a holiday , sickbays vacation days, personally days the list goes on and on….. These large companies have huge promises to make and if they can’t rely on their employees here they will go else where….. Ok so a large company is profitable…. It doesn’t matter how much you pay somebody, money doesn’t make somebody productive…..
@@FarmingFixingFabricatingAmen. American workers have gotten a bit lazy, all anyone has to do is watch your crew sticking with it until the job is done, no gripes, and they stay past an 8 hour day. I'm not happy JD is moving some manufacturing to Mexico, but they are in the biz to make $.
Развлечения
![Sean Rii, Karyon, Sharzkii - Taungule [My Love] (Official Visualizer)](http://i.ytimg.com/vi/eJoMuypbSzQ/mqdefault.jpg)
Hi Andy !
Good job cleaning your 2 planters.
that 8110 looking very good like a new one .
Good job Jerret !
Thanks Andy for your time and everybody have a good day at the farm !
Jared did a damn fine job on that 8110!
Man that 8110 is looking sweet ! Nice work….. Bummer on the wrong decal……
That tractor will be bright with all those LED’s!
Never a dull moment around the farm.
Terrific update Andy! Thanks for posting.
Good job guys and I'm sure your corn will do well good job cleaning up the equipment make it nice and beautiful
Our Deere mechanic recommended taking the seed tube brushes out and storing them where mice can’t to them. They had a customer left seed in them and the mice destroyed them over winter.
Watching you uncles 9900 on Big Tractor Power....Those guys are moving!!
Same here. I just finished watching that video and saw that Andy just uploaded
Same just got done watching too.
That’s old footage, Tractor Chasers uploaded a shorter video of footage from that day two years ago
@@BillySmith-st5ow is that the chopper that burned?
No, it’s the replacement doing second cutting the same year. They lost the other doing first
Hello Andy that's alot seed left over. Enjoyed your video have a great day.
Good video Andy 🚜👍🇺🇲
The 8110 turned out pretty sweet
Great maintenance
Looking great men 👍
The 8110 looks great nice job great video
Always something to tinker on. I used to put a liberal amount of windex liquid then put decal or placard on and line it up. Then use a credit card to sllide liquid out from behind and let it dry.Easy way to line up and remove any air bubbles.
Thinking ahead with the anti-seize 👍🚜
Your Son's and Daughter's sure do excellent work in everything they do. . .
I do think it time. . . Time for Alex to Shitcan the automatic transmissions and step up to the big leagues and start floating gears on the 18 speed Eaton Fuller RoadRangers. . . .
Good that seeds are in the ground an y'all can throttle back a tad.and.catch up on loose ends.
Andy, with the bolts you put in the Piviot wings, when the hitch pin broke too, just amazing to see that, you put in bolts that weren't long enough / pulling on the thread, which is the weaks part of the inch & a 1/4 bolts. So get longer boths / grade 8's. Sonny Farms had the same problem, they put in hitch pin.
That bolt was a grade 8….. what was in there was a draw pin that broke…. Look at the other side to see what we have in there. We have broke the factory pins on both sides and replaced them with draw pins.
Another very interesting video Thank you Andy 😊😊😊😊😊😊
My tractor had a small leak in the hydraulic pipe that ran from one side to the other and back up to a metering valve. So went to a dealer that could find the right piece, well eventually. In order to buy the pipe I had to buy 3 other pipes that I didn't want because they said they couldn't break up the set. A few hundred bucks but it doesn't leak anymore.
Makes good sense
Watching your uncle on big tractor power right now Andy
Those RUclipsrs always trying to do two handed job with one hand.
Hello! Work and more work...
GREAT
Andy I think you jinxed it when you talked about putting it on backwards.
Always lots to do did you find out what went wrong with the peterbilt 👍🏻🇺🇲
Wiring I guess
Nice.
Tks for sharing. You keep your leftover seed corn until the next year? You have any problems with it coming up the next year? How about your liquid fertilizer? Jared did a great job with the tractor. Looking sharp. You have any luck with the Anti Seize? If i walk by that stuff i have all over but where i wanted it. Lmao...
Keep the seed dry it’ll be fine
Murphy's Law is still active in 2024. If anything can go wrong, it will.
The law of selective gravity. The smallest of objects will fall to the least retrievable location.
Need to clear coat the hood. Would be slicker than owl shit.
Thank you for another Great video. Cheers
👍
Andy just wondering what's the spacing between the rows of corn in the field?
Standard is 30".
John Deere is laying off 600 production workers because you ( and many others) aren't buying enough new equipment.
What is the first job for 8110? When is wheat harvest?
And ah yeah
What is the bluesh-green coating on the the corn seeds?
Seed treatment
@@FarmingFixingFabricating thanks 👍🏻
Cost and Inflation
You might consider buying as much seed for next year as you can afford. The cost of seed may be 30 to 50 percent more by this time planting season next year.
Think about it.
What do you think about John Deere moving production to Mexico?
Greed, shouldn’t be allowed. Level the playing field. Tax their profits.
What exactly is an American worker without a company or a business to actually work for? Everyone you turn around there is a holiday , sickbays vacation days, personally days the list goes on and on….. These large companies have huge promises to make and if they can’t rely on their employees here they will go else where….. Ok so a large company is profitable…. It doesn’t matter how much you pay somebody, money doesn’t make somebody productive…..
@@FarmingFixingFabricatingAmen. American workers have gotten a bit lazy, all anyone has to do is watch your crew sticking with it until the job is done, no gripes, and they stay past an 8 hour day. I'm not happy JD is moving some manufacturing to Mexico, but they are in the biz to make $.
I hope one day SOON Jared begins a farming podcast with Doufous at Farming with Duffy Ag 2024. . .
👍