Electromagnetic Drill press VISE [PLANS]
HTML-код
- Опубликовано: 5 окт 2024
- If you want to get access to the plans, join us at patreon.com/madeinpolandd
Since we have had a new (old) drill press in our workshop for some time now, I decided to make a vice for it.
Thanks to the use of electromagnets, there is no need to block the vice with any clamps or screws during drilling.
This solution makes work much easier and saves time :)
PROMAG workshop furniture - • PROMAG MS Producent Me...
If you want to get access to the plans, join us at patreon.com/madeinpolandd :)
Drogie takie elektromagnesy?
@@Piotr_T 91zl szt
Dze kupi takie magnety?
@@michalkotulak4948 0:02
@@michalkotulak4948 wpisz na allegro Zwora DT 180
Made in Poland + Make it Extreme = amazing contents
Agreed. Both very talented!
this is definitely going on my "must build" list when I eventually rebuild my workshop (whenever that is)
Well done! 👍Another great piece of equipment added to the already well equipped workshop. 💪
Donn You here?!?
Thanks man!!
@@MadeinPolandChannel I discovered Donn DIY after you've mentioned him in one of your shop build videos (the trick with rubber on the bottom of a door) and now I'm religiously watching his ongoing "quad with a car engine" series.
Both of you are very talented.
Zbzvvsbcf
GO FINISH YOUR CRUSHER AND STOP WATCHING VIDEOS!!!
Początkowa prezentacja działania elektromagnesu najlepsza :D
Regardless of some of the negative comments, I think that it brilliant. An excellent idea. It is a prototype that works and works well. If more grip was needed as in heavy machining, it could be clamped in addition to the magnets. Loved it.
Cảm giác như mk đang đc nghe 1 bản nhạc chữa lành vậy đó. Giọng hát của đp rất đặc biệt, nhẹ nhàng tình cảm. Xem video thôi đã hay ntn r, ghen tị vs ekip qaa nghe hát live chắc hay gấp 💯lần lunn
Venho aqui para te parabenizar pela sua excelente e brilhante idéia de fazer uma morsa magnética móvel como mais uma ferramenta para o torno mecânico. "Os seus trabalhos me inspiram ser um profissional mais inteligente e mais experiente,vivendo e aprendendo". Desejo a você cada vez mais sucesso na sua profissão,continue assim porque você tem o dom. Brazil/São Paulo.
*Good job Darek* it turned out great. Your welding skills are admirable, and your design skills are improving with each new video.
To all those whining about "how this should be done different/better." Let us all know when you design/build the *"perfect"* tool that's without flaw/equal.
Очередная крутая поделка. Восхищаюсь такой работой
solidnie zrealizowany dobry pomysł, teraz będzie procentował ułatwiając prace a i humor może poprawi w gorszy dzień
Sir, You invent some really nice tools.
Great fabrication skills. Drill press vise always a necessity for many projects. But a Magnetic drill press vise is really a luxury. Great plan. Great build. Well done!
A really beautiful piece of work! Your Moore milling machine looks about as complicated as WWII German U-Boat torpedo room controls 😁
Obserwuję ten kanał już długi czas i doszedłem do wniosku, że jest Pan najlepszym fachowcem na yt. Pozdrawiam oby tak dalej!
I love it .....all made from scratch......all made by hand.....cool electro magnetic vice !! You have made a lot very cool and useful tools this is great !! 👍👍Totally awesome !! The naysayers are just jealous .
Шикарная идея и прекрасная работа ...браво👍
I like it! No, I love it! Brilliant, so many times, too much time trying to tie down the vice just right, to drill a 30second hole, what a time saver this is
I know you’re loving the new shop being set up just how you like it. Very proficient, everything right where you need it. Isn’t it a great feeling, there’s nothing like it! Sweet little vise too. I’m making a simple electromagnetic base plate for an existing vise I have that my father gave me. I only wish he was still around to see the technology today, just flipping a switch to lock it in place vs having to bolt it down every time he’d use it. Great job, thanks for taking us along✌🏼
Esta excelente, siempre es un placer ver tus videos y tu inmensa creatividad
Brother you can work with steel like a woodworker works with wood. PURE AWESOME Craftsmanship!!! 👍👍
Excellent work. ”Make it extreme” made one from microwave oven magnet. Works a treat too.
how could anyone not like this is beyond me. your content absolutely rocks!👌🏾🍻
Як все чудово приємнодивитись як ти все чудово робиш а головне що майстерня укомплектована інструментом дякую за відео
Just what I need. Thanks for the idea.
I'll cheat and buy a small vise, but the door lock was the useful hint.
.
Unbelievable! You work in metal just as if it were wood.
*Awesome vise! Really like your new workshop* 😎
This is a very strong six, well played sir.
Klasse Idee mit den E. Magneten unter den Maschinenschraubstock
When he kept going back to the saw.. MOAR STEEL!!! 🙌
Nice to see you back at metalworking in your new workshop!
needed a vise to drill all those holes.
haha
great job, you rock.
Beautiful old drill press.
Great video mate. Those electro magnetic door locking systems are so powerful
Genial tremenda prensa hermano desde el otro lado del mundo VENEZUELA,felicidades muy buen proyecto y gracias por darlo a conocer EXITOS
As always excellent work. But what I like most is your heavy drill.
Very coll build you are quite the craftsman.
Excellent design and manufacture.
Great addition to the shop.
Thanks for sharing.
Happy to see cap screws back in use ; )
It massive, it solid and works perfect!!!
This will be next project for my workshop. Thanks for idea!
Excellent work as always. We featured this video in our homemade tools forum this week :)
All without detail drawings? Amazingly! 😍
No no Polak to potrafi zrobić coś fajnego.💪🏼💪🏼💪🏼💪🏼💪🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼
👍 Danke fürs Hochladen!
👍 Thanks for uploading!
👍 Very good and beautiful, thank you!
Now, this is something, a really cool work.
Men this is Nice. I must have in my workshop 👍😁
нармально
Lubię to oglądać, uspokaja mnie to
I think the 2 Magnets are not strong enough.
@12:50 you can see the vise moving a little.
I would add another 2 Magnets.
Yeah, at 12:47 the video transition makes it really obvious.
Adding more magnets is a solution for sure. Though, the extra heat generated by those magnets would induce even more thermal expansion which is not that good on a precision tool.
Good spot, really clear if you look at the yellow warning triangle sticker at the bottom of the screen
That's true...and this is just a "drilling holes" test...buti it's a milling machine and a machine vise.
Also, for magnet mounting you have to keep clear desk, hygiene first, no any metal shavings at the bottom
And hope the power don't go out during drilling ...been there with surface grinders.
No i co kto sobie lepiej życie ułatwi jak nie Polak. Super sprzęt.
Super! Great idea. The performance is as always on top.
Hello mister Poland that is a vise, beautiful, very good work you are a legend my friend
It'd be cool to make a few of these electromagnets and make a hook for them and have it as an attachment for a small hydraulic crane to pick up small to medium piles of scrap metal and stuff.
Zarąbisty pomysł, super projekt.
Experiment is good poland 🇵🇱 and indonesia🇮🇩 🤝🤝🤝🤝
I really like your homemade diy I watched your channel before I have my own
i like the idea of welding
We'll be waiting for a video about that new milling machine of yours.
Well done, the vise is awesome.
very creative, you know how to handle with metal :)
As I said before, you are one handy person
watching from minnesota usa and im also mostly polish
Z trafo od mikrofalówek robi się dobre elektromagnesy i praktycznie za friko pozdrawiam :)
Nice vídeo. Tanks from Brazil
Saya suka menonton channel youtube anda.sangat menginfirasi sekali sukses buat anda sekeluarga
Nice, will make one tomorrow
Świetna robota :) Pozdrawiam
12:48 - it moved! (
Right, but set it to high voltage and it should be stable then. It works under 12V.
Saw that too... Still pretty damn cool though...
Resonance, even magnet can't hold it.
That's twisting force. Magnets provide mostly clamping force. He would need to add something to the bottom to increase friction to get it not to twist like that.
@@xenonram O! It might make sense, a rubber pad or something.
pieknie pieknie Panocki
superb build and the outcome. wow!
Great video! Looks like your Rhino Cart is still going strong(hands)!
Damn cool machine you got there ! Great magnetic vice. twa piwa from Belgium !
All I can say is you, sir, think up some pretty impressive projects!
Once again my friend, a superior design and construction video. So I must be a Patreon subscriber to get the plans. Oh well, being 63 years old and on disability does not give me the advantage of being able to contribute to patreon. Great job though. Thank you again.
a lot of work but a great final result keep the videos going now with the new shop
Awesome workmanship! You are so creative. Love your vids.
Iron man 100%, thanks!!!
Палец в верх и моя подпись!) Самое лучшее исполнение электротисков на RUclips. Молодец! Я буду копировать с Вашего позволения!)))
Great project and build.
For reliability and better performance I suggest using another type of power connector, i.e. XT60. The one You used is kinda shitty, I had many problems with them. To improve the situation You can scratch the area around the middle pin and solder it to make better electrical connection and minimise power loses (and heating the connector, which might get significant with current above 4 amps);
MASTER excelente idea felicitaciones por tu talento.
Всё-таки слабоваты магниты оказались. При сверлении коронкой тиски чуть но провернулись. Было заметно. А вообще здорово получились!
great work as allways
gran bel lavoro, complimenti
Отличные тиски !!! От меня огромный плюс !!!
Complimenti, un ottimo lavoro come sempre. Bravo.
Generalnie świetna idea, ja np. dołożyłbym tam ze 3 ogniwa 18650 .
Now, I did see it move a TINY little bit when it drilled the holes... So, if you are doing 'precision work' this might not hold it through the entire cut. But a SUPER handy little clamping mechanism for getting any angle you could ever want for rough work.
Pięknie, świetny pomysł.
One word. Impressive !!!
Polak potrafi naprawdę świetny film i świetne imadło.
زور جوانه كاره كانت هه ر ساغ بى.
Hi Iam in kurdistan
Shop is really looking good!
Buddy absolutely amazing.
Súper...Gran Herramienta....!!!...Saludosss
Excellent work. That should save a lot of time and potential injuries. Now he is no excuse not to clamp the metal down instead of holding it with his hand while drilling holes
Excellent concept. Marvelous engineering. 👌🏼👌🏼👋🏻👋🏻
Dude that was awesome as hell .... Dam u always take things to another level brother 💪🏻 ... Love the videos man keep em coming 👍🏻👍🏻
Always enjoy your videos. Great job.
Jak zawsze rewelacja!
Amazing vise!! 👍
Top video yet again mate! You must be happy with the new workshop! Very jealous! Keep up with the great video's! Looking forward to the next video for some inspiration!
Prying on the magnet next to the open box cutter, and hammering the sliding jaw of the vise towards your thumb made me wince a little bit, but nice build otherwise. Make sure you take care of your health/safety.👍 Also, the shrink tubing on your switch. Do you think using one big one might pull the contacts close enough together that they might arc?