Have used my XM3s to death, particularly during lockdown where the ANC kept me sane. As a result my pads were in a sorry state. Bought some new ones, but was really hesitant about doing the replacement. Felt loads better after watching this video - didn't take long, and much cleaner pads now!
Wouldn't worry about it. I've been using a pair of these practically every day for the last 3+ years (the same pair), and have not managed to tear the cups. The black leather finish has almost entirely worn off, however, and I am now replacing the cups for this reason. More importantly, the sound quality is the same as the first day I got them.
You are the goat. I didn't even know what to do. My ear pads were torn and destroyed and didn't know what to do. Ordered the replacement from Amazon. And now I have new ear pads. And they make my headset look brand new since I never abused my headset.
Thanks for this video. Really straight to the point which is great I had to replace my current pads as the leather on my old ones were fading a lot and it smelt pretty bad even after multiple attempts to try and clean them
Very Helpful, finally a video that is good quality etc, great explanation etc. I know this is simple but I always worry I will break the inside microphone's wires so I watch video's to make sure I am doing it right, glad to know I am.
@@rfh9560 I don:t think I got a genuine part, I got it off ebay, and noticed much nicer comfort and an improvement in quality (because the old ones were worn down so much).
@@VincentW2 i just installed new ones a minute ago, they were about €5 from Aliexpress. They are clearly not as malleable, in part for being new I suppose. Cannot tell any difference in sound/ANC yet, will have to test outside. What concerns me more is the comfort/durability of these, the old ones were clearly leather, I could see the fibres, and it helps absorb the skin’s oils, it was actually surprisingly greasy when I started to press and pry them, and I make sure to wipe them on my shirt before putting them away, and it’s not even warm here either. Last case scenario I can contact sony for genuine ones, I love these headphones so it would be worth it
Thanks for the nice video--well done! I like that you emphasize patience--I often get frustrated and impatient when working on things! I have the WH-1000XM3 and am considering ear cushion replacement after only 5 months of ownership because the cushions are going flat and rolling inside the housing. This causes the already annoying foam padding on the drivers to push on my ears even more! Wonderful sound quality and excellent noise cancelling, but crappy ear cushions!
Aaron, thank you for pointing out that the WH 1000XM3s need new pads. The ones provided are made of fake leather and quickly lead to itchy, sweaty discomfort. Which is regrettable because the 1000XM3s are so excellent soundwise. I solved that issue which had gotten serious for me, with a new pair of pads made with real, soft leather by Dekoni for that very headset. They come in either leather or suede but I opted against the suede because the noise-cancelling could be adversely affected. I may be wrong. They cost under $50, below Sony's plastic replacements and they completely eliminate the itchy, sweaty annoyance. Keep making them Aaron.
Beats are garbage laughed at a co worker when he bought them now after hearing mine he wants my sonys cause we have better bass and noise canceling I tried to warn him
@@SuperZombiepimp i went to try on beats headphones, i just had to cringe at the new models. the old studios were fine but hell, they are crappy af today. Just by touching the material I knew how shitty they are. The solos didnt even fit my head. The XM4 I bought has a plastic body too, but dont compare that to the ugly beats.
Absolutely helpful, it seems simple to rely on intuition and I initially just tried to pull it out and slightly ripped the leather on one cup and seeing him use a blunt flat tool just gave me the confidence to correctly do it based on his instructions.
was about to contact sony for costs then i see the $88 price tag, which probably be more expensive by now! will buy earpads online to try and fix on my own. thanks for this video!
bought new earpads on taobao a while back after much research, but only just installed it. finally got it done and it cost only about $20+ !!! wow! this video saved me probably a $100 at least? haha.
Thank you! This was super helpful. I was delaying the task of replacing my earpads for a while and was afraid I'll break my headphones lol. With your guidance it turned out to be easy-peasy :) I wasn't even using the official replacement, $30 lambskin pads from amazon worked just as well and feel as comfy as the old ones.
“The quickest way to destroy your headphones is to rush” 😂😂😂 isn’t that a fact. I have the XM4’s and my biggest gripe about them is how thin the earcups are. My ears touch the inside of the headphones and they get way too hot. No room to breathe in there. So I’m going to try one of the aftermarket sets of earcups, hoping they’re a bit bulkier and give me some more room inside of these units. I also have a set of Bose QC35II’s and they are hands down better as far as space goes…. I can wear them for easily double the time and not get warm. They are also much much easier to change the earcups on 😂 thanks for this video though! You’re the best. And your humor is stellar 🤙🏼
Thanks, got it done within 10 mins as the video played in the background! I used a nail clipper too, a guitar pick was clearly too short/weak for it. One extra thing I did: I carefully cleaned some dust with a small tape before putting everything back on.
Are there any videos on how to replace the battery in the Sony WH-CH700N? I need to replace mine, have purchased the battery, but don't want to destroy the headphones. Thanks
BTW I just did the same thing on the XM4 and I using this video as a reference and its actually the exact same way, even the clips seems similar for those of you who are wondering for the XM4 ear cups replacement.
i got my new ear pd, successfully removed the old one and inerted the new one, all good now and looking new XM3, Thanks for the video really helpful ❤😊❤😊
Thank-you! I was poking and prodding and didn't want to get too aggressive without really knowing how they were connected. This tutorial was awesome. Thanks.
I dropped my xm3s & the pads fell off & got damaged so now I'm replacing them with velour ones! thank you for the quick and useful video my headphones are good as new now ♡
the trick is, once the headphones smell your fear they gonna resist. just make em believe you know what youre doing and show dominance, if all fails pee on it
Thank you! My XM3s are (apart from the headband leather..) looking brand new and SOUNDING as good as they should be for noise cancelling. Also thanks to Sony for offering replacement parts in my country still for the XM3s, $25 a pop. Not too bad at all tbh because the XM4s sound muddy (sorry, tried them, they don't compare to XM3 2.0.0 or 4.5.1) and the XM5s.. I've yet to try but really disagree with their form over function design. Awful move towards Apple-baiting dreck. Thanks Aaron!
Thanks for your help bro. I have the “international version” of the MH 1000XM3 and the foam pad that covers the drivers looks different than yours. Not sure what that’s about.
Nail clipper arm is very very good. Nail clipper is smooth Thz but Put tape outside of the 1000M3 at the snap/clip locations. Makes 4 a better removal and install. So that you nail clipper pry only at the snap/clip locations. Then Press on only at the snap/clip locations.
I tried to remove the foam inside the earcup it’s covering a microphone above the driver. I tried the headphone on with no foam inside the cup the sound maybe changed a little I can’t quite tell (but from my past experience modding headphones it should) my ear is not touching the inside which is great. I think the foam is there just to protect the small microphone if you don’t like the foam touching your ear I suppose you can remove the foam but be careful with the microphone. In regard to dust, there are many headphones with a much more exposed driver so this should not be an issue.
I finally be able to save up and buy one BUT it turn out to be a BIG DISSAPOINTMENT in terms of comfort. 5 mins in and my ears felt warm like sauna. Obviously I can't afford to buy BOSE QC 35 now . My wish is if I can replace the Sony's pad with QC 35s replacements. Appreciate a reply. Thank you.
That have helped me to clean them in soap water , everytime i put the headphone on a surface that Make somes greasy marks. Now it's full cleaned, thank you 👌🏻👍🏻
Thanks Aaron. I’m thinking about getting these headphones but I’m concerned that they will only last as long as the battery does. At over £250 that makes the headset too expensive to simply throw away if or when the batteries dies. Is it possible to replace the batteries themselves on this model, or should I buy a cheaper headset where it won’t matter so much?
thanks man. ive just bought mine recently, and im having some issues withe left headphone. It seems the mic inside touch the sponge and that makes that horrible distortion
Thanks so much for this video! I didn't replace my earpads (couldn't find any where i lived especially the beige colored) but manage to clean them with a toothbrush..I have the beige ones and I've been using these to the gym to the point that it has black and yellow stuff on the middle part (fungus and earwax? Yikes! ) and my earphones smelt bad. But prying them out and gently brushing the middle part and I cleaned about 96% of the dirt.. They're much more cleaner now! You should make a tutorial on how to clean the middle part of the earpads
was gifted a Razer Opus last year... the ear cushions are splitting down the seams now and Razer doesn't have a back stock of their ear cushions (ridiculous I know). The ear cushions for this Sony headset are oddly similar (with the exception of 2 additional notches on the underside of the cushion) and I was wondering if I could just use those? Would be better than di*king around with Razer's terrible customer support.
I think the top cushion involves replacing the entire headband - the Sony spare parts site has no listing for the top cushion, just for the headband with the cusion.
what about Audio Technica ATH-ANC900BT? Is it possible to replace the earpads those headphones? Also can I buy the replacement pads straight from Audio Technica just like SONY does with 1000XM3 in this case??
For future reference there is a magic tool called a spudger which is plastic and flexible and will break instead of the tech if too much force is applied
Have you ever replaced the foam screen/shield that lays on top of the actual speaker unit? I found that mine has deformed due to my ear shape and can't seem to find replacements parts online
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
How to replace Sony WH-1000XM4 Cushions (2022) - ruclips.net/video/BY6tM4fZ1qU/видео.html
Aaron... you're legit the full "Sony XM3 owners' guide".
Your vids are appreciated :)
You're welcome ;)
@@aaronloudnwireless
4:10 How do you clean the "screams", protective cloth?
Finally with my xm3 I'm seeing all his videos JAJA
Have used my XM3s to death, particularly during lockdown where the ANC kept me sane. As a result my pads were in a sorry state. Bought some new ones, but was really hesitant about doing the replacement. Felt loads better after watching this video - didn't take long, and much cleaner pads now!
Nicely done. I am suffering from new device syndrome worrying about what will happen if the cups get torn.
My JBL everest did this and jbl die not want to help me
Switched to sony for that Purpose
Me too 😀
Me too and the headphones didnt arrived yet!!
Wouldn't worry about it. I've been using a pair of these practically every day for the last 3+ years (the same pair), and have not managed to tear the cups. The black leather finish has almost entirely worn off, however, and I am now replacing the cups for this reason. More importantly, the sound quality is the same as the first day I got them.
Wtf. First world problem?
You are the goat. I didn't even know what to do. My ear pads were torn and destroyed and didn't know what to do. Ordered the replacement from Amazon. And now I have new ear pads. And they make my headset look brand new since I never abused my headset.
I clicked on this 8 min video over the 3 min one, and I have no regrets. Thank you, I felt very informed and confident to go ahead with this. 🥰
You're welcome!
Thanks for this video. Really straight to the point which is great
I had to replace my current pads as the leather on my old ones were fading a lot and it smelt pretty bad even after multiple attempts to try and clean them
Very Helpful, finally a video that is good quality etc, great explanation etc. I know this is simple but I always worry I will break the inside microphone's wires so I watch video's to make sure I am doing it right, glad to know I am.
Dudeeee this was such a quick and to the point tutorial. You just saved me hundreds of bucks.
I bought 30 dollar ones off of Amazon and I can't believe this was uploaded years ago. Still a wonderful tutorial!
Awesome video. Had these headphones since launch and finally replaced the earpads after 3 years. They feel like new!
Did you get a genuine part? If not, did you notice any difference in sound/ANC?
@@rfh9560 I don:t think I got a genuine part, I got it off ebay, and noticed much nicer comfort and an improvement in quality (because the old ones were worn down so much).
@@VincentW2 i just installed new ones a minute ago, they were about €5 from Aliexpress. They are clearly not as malleable, in part for being new I suppose. Cannot tell any difference in sound/ANC yet, will have to test outside. What concerns me more is the comfort/durability of these, the old ones were clearly leather, I could see the fibres, and it helps absorb the skin’s oils, it was actually surprisingly greasy when I started to press and pry them, and I make sure to wipe them on my shirt before putting them away, and it’s not even warm here either. Last case scenario I can contact sony for genuine ones, I love these headphones so it would be worth it
most people dont care for tutorials like this, but most of us are realy glad that you did the video.
Thanks for the nice video--well done! I like that you emphasize patience--I often get frustrated and impatient when working on things! I have the WH-1000XM3 and am considering ear cushion replacement after only 5 months of ownership because the cushions are going flat and rolling inside the housing. This causes the already annoying foam padding on the drivers to push on my ears even more! Wonderful sound quality and excellent noise cancelling, but crappy ear cushions!
So true, patience is key when working with delicate devices and that too for the first time.
Aaron, thank you for pointing out that the WH 1000XM3s need new pads. The ones provided are made of fake leather and quickly lead to itchy, sweaty discomfort. Which is regrettable because the 1000XM3s are so excellent soundwise. I solved that issue which had gotten serious for me, with a new pair of pads made with real, soft leather by Dekoni for that very headset. They come in either leather or suede but I opted against the suede because the noise-cancelling could be adversely affected. I may be wrong. They cost under $50, below Sony's plastic replacements and they completely eliminate the itchy, sweaty annoyance. Keep making them Aaron.
Where can I find these?
Nate S I got mine on Amazon.
Thank God they don't use that annoying adhesive like the beats studios.
They are well built it seems. Proud to buy Sony again.
Beats are garbage laughed at a co worker when he bought them now after hearing mine he wants my sonys cause we have better bass and noise canceling I tried to warn him
falkerhard well mine just broke for no reason after a year so😐
@@SuperZombiepimp i went to try on beats headphones, i just had to cringe at the new models. the old studios were fine but hell, they are crappy af today. Just by touching the material I knew how shitty they are. The solos didnt even fit my head. The XM4 I bought has a plastic body too, but dont compare that to the ugly beats.
Merci pour votre excellente vidéo
Votre tutoriel est clair et précis
J’ai changé mes oreillettes en moins d’une minute
😃👍👍👍😃
de rien :)
Aaron, how to change the headband on 1000mx3 ?
Absolutely helpful, it seems simple to rely on intuition and I initially just tried to pull it out and slightly ripped the leather on one cup and seeing him use a blunt flat tool just gave me the confidence to correctly do it based on his instructions.
was about to contact sony for costs then i see the $88 price tag, which probably be more expensive by now! will buy earpads online to try and fix on my own. thanks for this video!
You're welcome!
bought new earpads on taobao a while back after much research, but only just installed it. finally got it done and it cost only about $20+ !!! wow! this video saved me probably a $100 at least? haha.
Thanks Aaron...took mine off and flipped them over... like new! Thanks so much!
Thank you! This was super helpful. I was delaying the task of replacing my earpads for a while and was afraid I'll break my headphones lol. With your guidance it turned out to be easy-peasy :) I wasn't even using the official replacement, $30 lambskin pads from amazon worked just as well and feel as comfy as the old ones.
Your a real one you use at home tools and show directly how to take it off at home thank you
very clear instructions i managed to fix it within 1 min!!! THANKS SO MUCH❤
“The quickest way to destroy your headphones is to rush” 😂😂😂 isn’t that a fact.
I have the XM4’s and my biggest gripe about them is how thin the earcups are. My ears touch the inside of the headphones and they get way too hot. No room to breathe in there. So I’m going to try one of the aftermarket sets of earcups, hoping they’re a bit bulkier and give me some more room inside of these units. I also have a set of Bose QC35II’s and they are hands down better as far as space goes…. I can wear them for easily double the time and not get warm. They are also much much easier to change the earcups on 😂 thanks for this video though! You’re the best. And your humor is stellar 🤙🏼
Thanks! Glad this video helped 😂 Also please subscribe too if you haven't already! 😁
Thanks!
Just replaced mine with your guidance.
I appreciate how you made it so concise.
Excellent! Really useful, just changed the earpads in my 1000XM2.
Glad it helped!
Thanks, got it done within 10 mins as the video played in the background! I used a nail clipper too, a guitar pick was clearly too short/weak for it. One extra thing I did: I carefully cleaned some dust with a small tape before putting everything back on.
I want to clean the cushions because of sweat, how do you recommend to do it?
Take it out and put it under the sun
@@brandonwong8169 lol
stop sweating. duh.
Microwave
Thank you for all the work you do Aaron. Truly appreciate it. Can’t wait for the latest updated one for the new WH 1000 XM4!😁
Is there one
@@chrisgrabowski6691 yep, but upgrade isn't worth. My Sony XM3 is still awesome.
Thank you. Your RUclips was very youthful for me.
Hey Arron, thanks for the helpful video. Is there any way I could find genuine Sony pads? I hear these make the noise cancelling worse.
hey aaron what replacement ear pads do you recommend
Did a video about this ruclips.net/video/XtWH_c810C4/видео.html
No
But Ill whach it thanks
Thank you! I have tried it today and it went well 😊😊😊
Are there any videos on how to replace the battery in the Sony WH-CH700N? I need to replace mine, have purchased the battery, but don't want to destroy the headphones. Thanks
Thank you! Decided to change Headphones Earpads after few years of use. It's like new.
Thank you! Great guide and info!! ❤❤❤❤
BTW I just did the same thing on the XM4 and I using this video as a reference and its actually the exact same way, even the clips seems similar for those of you who are wondering for the XM4 ear cups replacement.
Where did you buy the pads ? Can't find andy for xm4
Hi whats the alternative pads that you would suggest that will not impact the audio quality?
i got my new ear pd, successfully removed the old one and inerted the new one, all good now and looking new XM3, Thanks for the video really helpful ❤😊❤😊
This made changing the ear pads so easy. Thank you!
which earcups do you recommend? I really need to know this. I don't wanna mess with noise cancelling or sound characteristic.
Thank-you! I was poking and prodding and didn't want to get too aggressive without really knowing how they were connected. This tutorial was awesome. Thanks.
Very useful! Thanks for helping me keep my XM3s for longer!
I dropped my xm3s & the pads fell off & got damaged so now I'm replacing them with velour ones! thank you for the quick and useful video my headphones are good as new now ♡
You could give me instructions to perform surgery you are so calm. Great video, thanks.
Thats very kind! You're welcome!
the trick is, once the headphones smell your fear they gonna resist.
just make em believe you know what youre doing and show dominance, if all fails pee on it
Did the same with your tutorial ... thanks Aaron !
Thank you so much man. Love from India...
this video really helps, much appreciated
Every snap, Aaron goes "good", and I die a little inside... Brrrrr
Every snap was satisfying like popping bubble wrap
Just had to replace my earpads. Had a bit of doubt about how to remove the earpads but it worked perfectly.
Thank you! My XM3s are (apart from the headband leather..) looking brand new and SOUNDING as good as they should be for noise cancelling.
Also thanks to Sony for offering replacement parts in my country still for the XM3s, $25 a pop. Not too bad at all tbh because the XM4s sound muddy (sorry, tried them, they don't compare to XM3 2.0.0 or 4.5.1) and the XM5s.. I've yet to try but really disagree with their form over function design. Awful move towards Apple-baiting dreck.
Thanks Aaron!
No problem!
Thanks for your help bro. I have the “international version” of the MH 1000XM3 and the foam pad that covers the drivers looks different than yours. Not sure what that’s about.
Yours is fake...
11pm at night and I needed my new cups on for work tommorow, instructions didn't let me down
will the sony xb900n thicker earpads fit on the 1000xm3?
Just about to replace my pass yours was the first to pop up, nice n simple well demonstrated…new subscriber 👍
Nail clipper arm is very very good. Nail clipper is smooth Thz
but
Put tape outside of the 1000M3 at the snap/clip locations.
Makes 4 a better removal and install. So that you nail clipper pry only at the snap/clip locations.
Then
Press on only at the snap/clip locations.
Is it the same as for the XM4?
I tried to remove the foam inside the earcup it’s covering a microphone above the driver. I tried the headphone on with no foam inside the cup the sound maybe changed a little I can’t quite tell (but from my past experience modding headphones it should) my ear is not touching the inside which is great. I think the foam is there just to protect the small microphone if you don’t like the foam touching your ear I suppose you can remove the foam but be careful with the microphone. In regard to dust, there are many headphones with a much more exposed driver so this should not be an issue.
Nice one there, Snake.
That was easy, make the video on how to replace head cushion! That's what I need!
thanx so much, I got the job done before this tutorial had finished :)
I finally be able to save up and buy one BUT it turn out to be a BIG DISSAPOINTMENT in terms of comfort. 5 mins in and my ears felt warm like sauna. Obviously I can't afford to buy BOSE QC 35 now . My wish is if I can replace the Sony's pad with QC 35s replacements. Appreciate a reply. Thank you.
Aaron will the earpads from xb900n's fit to wh-1000xm2? Can you check this out? We all knew that xb900n have the best cushions
That have helped me to clean them in soap water , everytime i put the headphone on a surface that Make somes greasy marks. Now it's full cleaned, thank you 👌🏻👍🏻
Hello, I wonder if remove spong over driver can the sound become more clear like sony mdr-1am2 ? Thanks
Thx from the Netherlands, very usefull, aboiut to replace them ! Keep up the good work !
Thank you! Also please subscribe if you havent already! 😁
Are the right and left pads different? the parts site sells them individually for some reason
I got alot of help from this video 🎉
Nice video Aaron! 👍🏼 The upper part cushion of my headphone also need to change apparently. I’m wondering whether is it replacable as well?
does this method apply to the new sony xm4? Are the earcups on the xm4 easy to replace just like the xm3?
I'm wondering if the ear pads for SONY XM3 is the same as the previous generation XM2?
Very helpful, thanks man
Thanks Aaron. I’m thinking about getting these headphones but I’m concerned that they will only last as long as the battery does. At over £250 that makes the headset too expensive to simply throw away if or when the batteries dies. Is it possible to replace the batteries themselves on this model, or should I buy a cheaper headset where it won’t matter so much?
Can you do a version on sony xm4's? TIA
pretty sure its just the same thing
Hi Aaron... Can you try to connect wh-1000xm3 to multiple devices? Macbook and android phone pls...
Great instructions. Worked perfectly. Thanks :)
Thank you Aaron! I didn't replace it though but used the other side of the clothing of the headset. It works!
Hello, are cushions for WH-1000xm2 identical with the cushions for WH-1000xm3? Thank you
How much do a set of new cushions cost ?
So helpful, thankssssss 💜
So my wh1000xm3 also has a headband that is in a bit of a bad condition, is that replaceable too? Not able to find many tutorials for that online
Bro thank you. Idk why but It took me forever to find this info 😅
Hey Aaron, you think this works for the xm4?
thanks man. ive just bought mine recently, and im having some issues withe left headphone. It seems the mic inside touch the sponge and that makes that horrible distortion
Thanks for the tutorial!
No problem!
Super helpful and easy to understand.
Many thanks. Look forward to the WH-1000XM4 version in due course, unless the principles are the same???
Thanks so much for this video! I didn't replace my earpads (couldn't find any where i lived especially the beige colored) but manage to clean them with a toothbrush..I have the beige ones and I've been using these to the gym to the point that it has black and yellow stuff on the middle part (fungus and earwax? Yikes! ) and my earphones smelt bad. But prying them out and gently brushing the middle part and I cleaned about 96% of the dirt.. They're much more cleaner now! You should make a tutorial on how to clean the middle part of the earpads
hey, i need to desperately clean mine too. what did you clean it with? toothbrush and water or soap too?
was gifted a Razer Opus last year... the ear cushions are splitting down the seams now and Razer doesn't have a back stock of their ear cushions (ridiculous I know). The ear cushions for this Sony headset are oddly similar (with the exception of 2 additional notches on the underside of the cushion) and I was wondering if I could just use those? Would be better than di*king around with Razer's terrible customer support.
Hello Aaron 🙂, do you know if it is possible to change the top cushion? Thank you for your great videos 🙂
I think the top cushion involves replacing the entire headband - the Sony spare parts site has no listing for the top cushion, just for the headband with the cusion.
Thanks so much. I'm proud of myself with your help.
I've had my XM3's since 2021 I don't really need to replace them yet can I just take them off for some deep cleaning?
Sure
what about Audio Technica ATH-ANC900BT? Is it possible to replace the earpads those headphones? Also can I buy the replacement pads straight from Audio Technica just like SONY does with 1000XM3 in this case??
Because you used the word “pry” I know that I won’t be replacing the cushions anytime soon, but thanks for the amazing video!
You're welcome!
For future reference there is a magic tool called a spudger which is plastic and flexible and will break instead of the tech if too much force is applied
Does sony singapoe replace it ? Since they sell the original cushion
Have you ever replaced the foam screen/shield that lays on top of the actual speaker unit? I found that mine has deformed due to my ear shape and can't seem to find replacements parts online
Nice I could clean my ear pads thanks to you 😊 👍
thanks Aaron, i managed to fix it :D
Excellent video. Simple and to the point. Thanks, Aaron.
You're welcome!
This was helpful. Thanks Aaron!
bonjour.comment changer l'appui têtes en cuir pour tu faire un tutoriel.merci pour tes videos
Hi there
Can you pls help me showing how can we replace earpad cushions of Sony WH-XB 700
Is it the same process??