This fixed my flash drive: diskpart list disk select disk 1 convert gpt clean create partition primary select partition 1 active Now right click and format in file explorer (Like this comment so others can see)
I was using balenaetcher to turn my USB into a flash drive but it disconnected midway through, turning my USB unusable. I have the same problem. EDIT: my USB probably was faulty, tried with a different USB and everything went smoothly
IF YOU GOT THIS ERROR: -> DiskPart has encountered an error: The parameter is incorrect. Do the following: cmd: selec disk ___ cmd: clean cmd: create partition primary cmd: format fs=ntfs cmd: assign Now just wait for it to finish
@@g_stavowe all did. I watched several videos and all their tricks including yours but couldn’t remove this write protected problem away from my usb drive. I can watch videos and movies from it and open any files. Usb disk is healthy nothing wrong. Low level formatting gets IO error. I think too many files filled up the drive although it shows 1.73 gb free. This led to this problem as someone else mentioned on google. Sandisk has this issue on their drives.
This fixed my flash drive:
diskpart
list disk
select disk 1
convert gpt
clean
create partition primary
select partition 1
active
Now right click and format in file explorer
(Like this comment so others can see)
👍
Thank you very much nothing worked except this
If anyone not work convert mbr
Very helpful
thanks
Bhai thank you so muchhh I tried to fix untile 1 year but now this fixed.......😊😊😊😊❤❤❤❤❤
mine worked pretty fine, thx OP
I love you to the moon and back dude. Thank you
It stays on 0% forever. Any fix?
Try changing to a different port and start all over again
My removal disk status is unhealthy in the command prompt. It is unable to format
Did you fix it?
error for me😔
DiskPart has encountered an error : The request is not support.
See the system event log for more information
Same, no matter what i try
Same as you
I was using balenaetcher to turn my USB into a flash drive but it disconnected midway through, turning my USB unusable. I have the same problem.
EDIT: my USB probably was faulty, tried with a different USB and everything went smoothly
Same problem
@@schizophrenic_rambler mera bhi Aisa hi hua tha
Bro its actually works
When I entered the code format fs=ntfs it did not move away from 0%
Nice
all my struggling has now come to an end, i wish i found this video earlier🥰
Mine says file system is incompatible
That it answer me " 0 percent completed" what can i do then?
and did u resolve that bro?
My pendrive pro max the system can't even handle
It says format is not allowed on the current boot, system, pagefile, crash dump or hibernation volume
DiskPart has encountered an error: The parameter is incorrect.
See the System Event Log for more information.
same, help
Do the following:
cmd: selec disk _
cmd: clean
cmd: create partition primary
cmd: format fs=ntfs
cmd: assign
Do the following:
cmd: selec disk _
cmd: clean
cmd: create partition primary
cmd: format fs=ntfs
cmd: assign
❤❤❤ thanks
welcome
DiskPart has encountered an error: The parameter is incorrect.
See the System Event Log for more information. ?????
Do the following:
cmd: selec disk _
cmd: clean
cmd: create partition primary
cmd: format fs=ntfs
cmd: assign
you are my hero bro, thanks
You're welcome!
How much time it will take from 0% to 100%. ?
Depends on your machine's capabilities, should be done In 10
Op video bro 💓 ✌🏻
mine did not format it says status is unusable ?
change the file system
IF YOU GOT THIS ERROR: -> DiskPart has encountered an error: The parameter is incorrect.
Do the following:
cmd: selec disk ___
cmd: clean
cmd: create partition primary
cmd: format fs=ntfs
cmd: assign
Now just wait for it to finish
thanks bro💖 it helped
❤❤ thanks bro🎉
Bro after clean command it shows the same error
this fixed my pen drive really
Glad it worked out for you
Nothing works and I've checked everything in diskpart (clear readonly, clean, format). I have an original pendrive with Windows 10.
Virtual Disk Service error:
The media is write protected.
check my video for write protection removal
@@g_stavowe all did. I watched several videos and all their tricks including yours but couldn’t remove this write protected problem away from my usb drive. I can watch videos and movies from it and open any files. Usb disk is healthy nothing wrong. Low level formatting gets IO error. I think too many files filled up the drive although it shows 1.73 gb free. This led to this problem as someone else mentioned on google. Sandisk has this issue on their drives.
شكراً جزيلا حب Thank you so much太感谢了
My error volume is not formattable😢
Good
Bro👍
The last command what letter is that between the s&n.
fs_ntfs
equal sign fs=ntfs
Nice pic 😍👍
i tried upto 100%completed but diskpart has encounteredan error. the parameter is incorrect
cool video
(DiskPart has encountered an error: The parameter is incorrect.
See the System Event Log for more information. ) problam
Working but I have format my own disk not usb be carefull you really fast
Nc one
YOU OUR PC KING
not work
am sorry, any error message?
@@g_stavo my drive not working
Many thanks ❤❤❤
You're welcome!
May I know after format, can inside the pendrive folder be back?
Very nice 👌
Nice bro
Wow
thanks so much sir❤
You're welcome!
Wow nice
Bro not working this command
Great video
👍👍👍
good
you not showing the 100%
I understand
Akhir me kia likha h? Format nstfs?
format fs=ntfs
Saysing the media is write protected
Tnxx ❤❤🎉
You're welcome!
❤️
It took me More than 4 days to complete , But finally 😒
You're welcome!
Thanks
Mine can't locate my Disk 2 in CMD
mind changing ports
Kalo tampil no media gimana
thanks
You're welcome!
why it said 0 percent completed
You should give it time to complete the process * it takes time depending on your machine capability
@@g_stavobruh it takes forever but imma wait lmao😂
does it work?
Sab kuch kar liya kuch nahi ho raha hai
বোবা না কি ? এতো ভিডিও দেখেও ফরম্যাট হচ্ছে না। বোবার ভিডিও দেখে কাজ হবে ।
Wow nice ☺️
saved
Ss
Ji
Tidak bisa dibaca
english please?
He said cannot read @@g_stavo
"partition not selected"
what should i do?
Do the following:
cmd: selec disk _
cmd: clean
cmd: create partition primary
cmd: format fs=ntfs
cmd: assign
Nice
thanks
Nice
Nice
Nice
Nice
Nice
Nice