Husqvarna 236e brake band replacement
HTML-код
- Опубликовано: 26 авг 2024
- I bought this saw online about five years ago. It was built in 2011. It has given excellent service and starts easily all the time. I live in a small town with few services so I am happy to try and fix things if I can. I enjoyed this little challenge, if the video benefits anybody that will be a good thing BUT bear in mind, I'm not an expert and there are probably better ways of doing this with specific tools.
This, problems replacing the clutch cover, is "apparently" a common problem with new Husquvarna owners. Your little video shows how to solve this - thanks
QUESTION .... MY 326 CHAINSAW has some fuel trouble I installed a new carbu. and it starts and stops could be the inlet line is to small
3 .5 Diameter the carburettor people provided me with both fuel lines one yellow and one black ---the old one is yellow --outlet 4.5 di and must have
been white one the inlet ---- BOTH THE NEW ONE ARE 4.5 diam. to fit the new one to the petrol tank I should drill the hole out bigger probably 4.5dia (mm)
In doing this operation could create any problem to the carb or its ok ?
Someone has been using a cutoff wheel on a angle grinder I see the gloves lol
Boas dicas ...parabéns...
You are welcome. I’m glad it helped.
I wonder if you could help me with some hints about my 326 chainsaw it starts then after a few moments it stops .
First Self help is to check the air filter, it may need a good clean. Next I would inspect the fuel lines. After that I would fiddle with the carburettor.
@@Gregorynts EIRST LET ME SAY THANK YOU FOR YOUR RIPLAY ....Now let me if can make myself understood ...
I put a new air filter ,fuel lines seems to be Ok , the good sign is it started ....but I tried to tune up but it stays on high rev
then it dies ....I don't know why the choke liver keeps going back when I pull it out ...also I noticed that from the bubble (?)
hoses seems that there are some air bubbles in the houses ....Any help is very much appreciated Thank you for your time .
Apoyando 👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏
Thanks, I’m glad it helped.
👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏
Do you have a Go Fund me page? Looks like you are in dire need of a new pair of gloves..
I love wearing things down to the bare bones 😅until they are beyond repair.
I put the brake band in the trash. I know its a $$$ money maker for small engine gals & guys but please too much crap is no good for the reputation of the machine. I have many chain saws that are 30 years old + with no chain brake.
Don't do it with a 70 plus cc saw it can be a deadly mistake I almost lost my arm an was close to bleeding to death and have ran saws for 30 years but freak accidents can happen a chain break would have saved me from it