Genmitsu 4040-Pro Max | The Best beginner CNC?
HTML-код
- Опубликовано: 29 сен 2024
- Looking for a budget CNC router that you wont outgrow right away? Consider the Genmitsu 4040-Pro Max. With it's upgraded rails and the included 710w Trim router, this CNC will do more than just simple engravings. This is a good contender for a budget-friendly CNC router for beginners that will also keep working with you as you advance into more complex carves! Be sure to pick up some Jenny bits to go with this CNC from Cadence MFG!
The following links are affiliate links that provide a commission to this channel and are a great way to show your support at no extra cost to you!
Genmitsu 4040-Pro Max CNC Direct - shrsl.com/4nv1d
Grab the best CNC bits for your new machine here from Cadence MFG - www.cadencemfg...
Pickup the extra ER11 Collets on Amazon here: amzn.to/3Tdsat0
Follow me on Instagram and Facebook for behind-the-scenes on what is happening in my workshop!
/ vintauri
/ vintaurisworkshop
Check out my Etsy and Amazon store for more ways to support this channel!
vintaurisworks...
www.amazon.com...
Amazon Affiliate Links
Digital Calipers - amzn.to/3THuR5e
3mm Baltic Birch Plywood - amzn.to/43BuYEd
CA Glue and Accellerator - amzn.to/3TZz2d5
Acrylic Paint Pens - amzn.to/4b8Ty2c
@SainSmartofficial
@Cadence_MFG
A friend of mine just about to purchase one and I think I may follow suite later next year. That fish looks superb! Super helpful review my man! Well worth a like & Sub...
Thank you! I plan to show a bit more detail on the setup process in Vcarve for some projects on this machine in the near future. I’ll try to do that on the 3D carve as well.
Could you put biscuits in the spoil board
Biscuits would help keep them aligned but you would still want some support underneath to prevent flexing.
That's a useful review!!
Glad it was helpful!
Thank you very much. This is an excellent presentation. I dropped them a line a few days ago they said it would be available on Amazon in November. Again thank you very much excellent presentation.
I checked to see if they had it on Amazon yet to also include that link. I'll keep an eye out for it and will post that as well once it becomes available. I'm looking forward to sharing more projects with this one as I feel it's more approachable for people just dipping their tow into CNC routers.
Great Video Steve!
Glad you enjoyed it!
Why not have ship to indonesia 😢
Unfortunately I have no control over where they can ship these to. It is a nice benchtop CNC machine if you can get your hands on one.
When the specs reference working area, is the where one can carve into a project and perhaps place a larger piece on the machine? More specifically, can I place a 18” wide cutting board on the work surface and carve an inscription in the middle of the board?
There is about 20” of clearance between the two side rails so if you can hold the work in place you’d be able to carve on something that wide.
@@Vintauri thank you for your response. That is exactly the response I was hoping for.
@@markemmons1938 Happy to help. I'm hoping to do a couple projects that should maximize the working area over the next few weeks, so I'll try to share how that goes in a future video.
What is the weight? I'm in an RV. My shark is too heavy for me to lift
My postage scale put the machine at 46.5lbs. Not something id want to take on a hike but something I could move from storage to the bench fairly easily.