From a 1 person standpoint, I'm glad a small business stepped up and made a product like the one you have. If I'm not mistaken, i think there's a revision or 2 version's of that lift. Cheers guy's 🍻
@@AL_1547 yeah I don’t know. I just looked again if you follow his link it’s a completely different model and it’s $949. The one that he shows in this video I went to a page and it was only 249 or something like that.
We just built our top lift pro this morning and it was four and a half hours of pure hell… we did get manual but we might as well have had no manual with the amount of help it gave as it was just as bad if not worse than the videos provided by the company. Got it together and like you said it works great but still a pain in the ass to build
Just got my Top Lift and put together yesterday. I did have good instructions. The pieces are well made and can’t wait to use for our annual trip to the beach. At 68, I needed a one person solution to remove the top on either my TJ or JL.
I agree with you on the Installation Instructions. I struggled with getting the Hand Cable adjusted correctly. I actually did put a Rubber Vacuum Cap on mine, since it was way too close to my hood, when I parked under it. I may actually cut it off, since the Top Section of the Unit will never ever go that low. I have since upgraded to the TᴏᴘLɪғᴛ Pʀᴏ：Vᴇɴᴛᴜʀᴇ Pʀᴏ, because I have a small 1 Car Garage and this Unit has a smaller footprint in regards to the Base Width. Also, the Legs are adjustable and I just tuck them in when not in use.
for whatever reason, mine was too high to get inside and under the hardtop of my 2-door stock Jeep Willys... I remove the pins at the bottom and that helped get it lower to fit - hoping the weight of top keeps it still connected
Nice job, Very informative review. I thought about this for my Bronco, but I like the positive reviews over at Rolln Jack much better... and there are a lot of them. Not quite as expensive, very easy to assemble- in other words if you've assembled IKEA furniture in the past..the Rolln Jack should be a breeze. I prefer the crank motion rather than "push down" lever type operation- I feel it's a bit more gentle allowing me to dictate the amount of pressure I want to use lifting my hardtop without the risk of damaging it. Very sturdy design, yet simplistic. My on-order bronco hasn't arrived yet, but I'm extremely optimistic my Rolln Jack will exceed my expectations- not just from my opinion but from all the positive reviews it received.
Nice video. I was looking at this for my wranglers a few years ago. The 1k price was a turnoff. I bought a electric hoist from HF for about a hundred. Added plus is I can move stuff easily to my attic above the garage
So I wish you had brought camera around when you actually were pushing it into the vehicle. I wanted to see where you did that adjusting. Also very cool idea for the hangers in garage for each door 👍🏼 I’ve yet to take my top off as I live in Chicago and no garage to store it 🤨
This is WAY too expensive and given the PIA you say it is, the same money could be spent to put the manual/drill-drive roof lift like I have in my video. AND you get storage with it. Those tiny rubber stoppers that extend look like they need to be bigger to disperse the pressure. It just move way too much for me, bouncy = scary and costly. I was considering this to just pop mine off and then roll under my lift but after this, nah! TY for the info, saved me $900+!
Looks good, 👍 looks like it would be useless for me though, I've got the 2023 392 Extreme Recon with 40" tires and 5" lift, It definitely looks like it wouldn't even begin to lift my top
Doesn’t fit that way. Can’t park inside and have the lift with top on it backed in. You have to pull in forward to fit both. I would love it to be a longer garage but that’s just the way it was designed
I just lift mine off by hand and put it in the barn. Don’t have all that fancy concrete, so a roller hoist would not work. But life at 10,200 ft on a 100 acre ranch means my Rubicon ain’t as shiny flashy as y’all. But have a fantastic day “mall crawling”.
Hey Cleetus, we don’t “Mall Crawl” around here. Now I know you’re entire identity is built around the myth that you’re some badass country bumpkin that thinks they know dick from Dagwood, but Gomer you’re fragile masculinity is on full display here with a comment like that. Ohhhh noooo, he lifts it off by hand everyone! So did all of us until we used our brains. If you weren’t so desperate for attention on the internet you’d invest in a piece of wood to roll the jack on to make life easier. Instead, you’re not bright enough to figure out such a simple task so just go back to your barn and chew some hay with the other dumb animals in there. You really thought you just did something spectacular here didn’t you. 😂 #clown
Yeah, so what’s the deal that link you have takes you to their website and it’s a completely different model now for $949 when I watched this video 11 days ago and follow the link. It was like 249.
@@EastCoastJeepSRT yeah I don’t know where I got the 200 and change from but it is a completely different model. If you go to their website, I don’t really like the looks of it or the price of it to be honest with you. lol. the one that you demonstrate in the video looks just easier to use and probably less expensive idk. How much did you pay for yours then just curious.
@@EastCoastJeepSRT oh interesting so the older model that you have is more expensive than the newer model. either way it’s too expensive for what it does. I think around 500 bucks would be reasonable I’ll stick with the free extra set of hands. lol. 😂
I literally watched a total of 3 mins throughout and this guy mentioned his painters are coming 3 times 🤦🏼♂️. That’s why it’s 9 mins long. Blabbing along. Good product though
![COLOMBIA vs. CHILE [4-0] | RESUMEN | ELIMINATORIAS SUDAMERICANAS | FECHA 10](http://i.ytimg.com/vi/TDjN4W3yy1k/mqdefault.jpg)
can’t believe jeep doesn’t make a lift like this, I like this approach vs the ceiling lifts.
The easiest and most practical system I have seen
From a 1 person standpoint, I'm glad a small business stepped up and made a product like the one you have. If I'm not mistaken, i think there's a revision or 2 version's of that lift. Cheers guy's 🍻
This is probably the best solution I’ve seen yet and for 200 and change not a bad price
Wait, 200 what and change? These things are $950
@@AL_1547 yeah I don’t know. I just looked again if you follow his link it’s a completely different model and it’s $949. The one that he shows in this video I went to a page and it was only 249 or something like that.
We just built our top lift pro this morning and it was four and a half hours of pure hell… we did get manual but we might as well have had no manual with the amount of help it gave as it was just as bad if not worse than the videos provided by the company. Got it together and like you said it works great but still a pain in the ass to build
Just got my Top Lift and put together yesterday. I did have good instructions. The pieces are well made and can’t wait to use for our annual trip to the beach. At 68, I needed a one person solution to remove the top on either my TJ or JL.
How did the forward adjustable supports magically appear indtalled. Thats been my struggle
Great video. Were there any clicks left when you lifted the top? Seemed to drag when you pulled it off.
I agree with you on the Installation Instructions. I struggled with getting the Hand Cable adjusted correctly. I actually did put a Rubber Vacuum Cap on mine, since it was way too close to my hood, when I parked under it. I may actually cut it off, since the Top Section of the Unit will never ever go that low.
I have since upgraded to the TᴏᴘLɪғᴛ Pʀᴏ：Vᴇɴᴛᴜʀᴇ Pʀᴏ, because I have a small 1 Car Garage and this Unit has a smaller footprint in regards to the Base Width. Also, the Legs are adjustable and I just tuck them in when not in use.
for whatever reason, mine was too high to get inside and under the hardtop of my 2-door stock Jeep Willys... I remove the pins at the bottom and that helped get it lower to fit - hoping the weight of top keeps it still connected
Nice job, Very informative review. I thought about this for my Bronco, but I like the positive reviews over at Rolln Jack much better... and there are a lot of them. Not quite as expensive, very easy to assemble- in other words if you've assembled IKEA furniture in the past..the Rolln Jack should be a breeze. I prefer the crank motion rather than "push down" lever type operation- I feel it's a bit more gentle allowing me to dictate the amount of pressure I want to use lifting my hardtop without the risk of damaging it. Very sturdy design, yet simplistic. My on-order bronco hasn't arrived yet, but I'm extremely optimistic my Rolln Jack will exceed my expectations- not just from my opinion but from all the positive reviews it received.
Nice video. I was looking at this for my wranglers a few years ago. The 1k price was a turnoff. I bought a electric hoist from HF for about a hundred. Added plus is I can move stuff easily to my attic above the garage
How did the adjustable extension arms just appear?? Do those go in after because there is no way they will go over the roll bar!!!
Yes, you can add them for extra support. After I lift the top I add them before rolling it inside
So I wish you had brought camera around when you actually were pushing it into the vehicle. I wanted to see where you did that adjusting. Also very cool idea for the hangers in garage for each door 👍🏼 I’ve yet to take my top off as I live in Chicago and no garage to store it 🤨
I can do that when I take it off again for you
This is WAY too expensive and given the PIA you say it is, the same money could be spent to put the manual/drill-drive roof lift like I have in my video. AND you get storage with it. Those tiny rubber stoppers that extend look like they need to be bigger to disperse the pressure. It just move way too much for me, bouncy = scary and costly. I was considering this to just pop mine off and then roll under my lift but after this, nah! TY for the info, saved me $900+!
Don’t get me wrong, it could be cheaper and the instructions better, but it’s definitely worth it.
Looks good, 👍 looks like it would be useless for me though, I've got the 2023 392 Extreme Recon with 40" tires and 5" lift, It definitely looks like it wouldn't even begin to lift my top
I cannot imagine flooring that jeep of yours with that lift and tire size. Gotta be scary as hell. That said, I’m wildly jealous!
That cut at 2:23 is where you inserted the extensions, isn’t it? Why not show that?
Yes. You can see them. After I lift the top up and off of the Jeep, before I pull it back I slide in the extensions for more support
Do you think this could work to remove a canopy/topper for a '17 Toyota Tundra 5'5" bed/topper?
No idea
@@EastCoastJeepSRT Seems like an opportunity for professional mod for truck owners :)
Did you add the stabilizer bars off video?
No. Inside the Jeep I add them before lifting the roof off as an added precaution
Please from where i can buy toplift
So many haters. Great job man! Well thought out, fit and function are tits! I’d be damn proud of that design!
Thanks for the review!
Any reason for leaving the back glass up?
He gives no F**ks
Hi I may get one .nice video. I like my jeeps .as you can see .
Why don't Yu leave it in garage and back into it or away ?
Doesn’t fit that way. Can’t park inside and have the lift with top on it backed in. You have to pull in forward to fit both. I would love it to be a longer garage but that’s just the way it was designed
Hello please from where i can buy this ?
The Jeep look 👀 cool like that 👍
I agree, very difficult
Man, I’d be nervous with that thing, although it does make a 2 man job into a one man operation
You can shake the thing hard af and it doesn’t fall off. A lot of flex involved but secure
Does make me nervous too..
I was thinking of building a saddle type thing I can't back into but I have a 2 door so it'll be easier for me
The wheels are on backwards. Switch the brake wheels to the back.
No they’re not.
I just lift mine off by hand and put it in the barn. Don’t have all that fancy concrete, so a roller hoist would not work. But life at 10,200 ft on a 100 acre ranch means my Rubicon ain’t as shiny flashy as y’all. But have a fantastic day “mall crawling”.
Hey Cleetus, we don’t “Mall Crawl” around here. Now I know you’re entire identity is built around the myth that you’re some badass country bumpkin that thinks they know dick from Dagwood, but Gomer you’re fragile masculinity is on full display here with a comment like that. Ohhhh noooo, he lifts it off by hand everyone! So did all of us until we used our brains. If you weren’t so desperate for attention on the internet you’d invest in a piece of wood to roll the jack on to make life easier. Instead, you’re not bright enough to figure out such a simple task so just go back to your barn and chew some hay with the other dumb animals in there.
You really thought you just did something spectacular here didn’t you. 😂 #clown
Yeah, so what’s the deal that link you have takes you to their website and it’s a completely different model now for $949 when I watched this video 11 days ago and follow the link. It was like 249.
@@RandomVelocity I made this video a while ago guy. Things change smh
@@RandomVelocity No it wasn’t
@@EastCoastJeepSRT yeah I don’t know where I got the 200 and change from but it is a completely different model. If you go to their website, I don’t really like the looks of it or the price of it to be honest with you. lol. the one that you demonstrate in the video looks just easier to use and probably less expensive idk. How much did you pay for yours then just curious.
@@RandomVelocity I believe around 1100? Have to look for the receipt buy that seems right
@@EastCoastJeepSRT oh interesting so the older model that you have is more expensive than the newer model. either way it’s too expensive for what it does. I think around 500 bucks would be reasonable I’ll stick with the free extra set of hands. lol. 😂
It looks easy, once you put the lift together that is ☹️
That does NOT look sturdy at all!
It is. Crazy as it sounds you can shake this thing like crazy and it won’t fall off
knife hand game strong
If you need one you might want to take your jeep back to the dealership.
I literally watched a total of 3 mins throughout and this guy mentioned his painters are coming 3 times 🤦🏼♂️. That’s why it’s 9 mins long. Blabbing along. Good product though
I assembled mine today. What a nightmare. No instructions and a really horrible how to video
I got Hoist A Cart Gen 2... way better
Seal will never be the same, when you put it back on.
Always a potato to comment on something they know nothing about. Seal has been fine after a year of constantly use. smh
Sketchy
Not at all. You can shake it and it’ll flex, but it doesn’t move. The instructions are crap, but the lift itself is solid.
Lol..!!
This is useless when you have a sunshade installed.
Sunshades are lame though.
Damn.
You were better off with a winch and four straps.
It is the best way to remove and store the piece.
@@azammohammed5795 no, no it’s not.