I get excited and motivated when I see that Spencer has posted a new video. I then go into the shop and discover I have more in common with Tim Taylor than I do with Spencer Lewis...
I get a lot out of all the videos you upload, especially with the longer format. You are great at sharing the important details in a clear and concise manner.
Love the longer videos. I get a ton out of them. That’s how I learned to do my first tread, riser and stair skirt install. I have learned so much from your content. Thank you!
The long form videos are best. They point out all the possible failures that can occur throughout the project. It would be interesting to see how you scribed the face frame.
A little late here, but hey I love the long detail video. I would have even liked a couple more minutes to see you scribing the edges to fit so nice. Thanks for sharing your work with us
Another well explained process. One point is seldom made for carcass construction. Plywood is seldom square,so starting with a fresh/square cut on plywood.....is as important as squaring ends of the faceframe.
Great job on the builtins, Spencer. I do these all the time. Two things I like to do during install is to (1) seal the cabinet to the floor where the vent is with Lexel or some other form of a silicone sealant, and (2) use duct board or some other form of a rigid foam insulation for the vent. This will provide a dramatic improvement in airflow from the vent going where you want it to go, and prevent condensation buildup in the cabinet during the summer months when the A/C is running. I have found that here in south Louisiana, we run our air conditioners practically year round, and the bottom of the cabinet can get quite cold from the vent having constant air flow. I would imagine that in the winter, when the heat is on, the opposite would be true for your climate. Rigid foam with the foil face can help to mitigate these problems.
I like the long form build format. That said, this could be a two-parter. I would have enjoyed to see more details with the top build and especially the install. I can't picture how you scribed that unit as one piece between the walls. Good to have you back and thank you for the time it takes to put out content like this!
It was tricky scribing those pieces in. Honestly it would have been pretty advanced for the vast majority of viewers so video performance dips too low if I get to detailed. Essentially when video performance drops the algorithm won't serve up future videos to viewers so it's a careful titerope I have to walk.
This came at the perfect time as I’m about to build one in my family room so my wife can sit and watch the birds in the backyard. I was going to use built in draws, but I like the lid panels better. Mine won’t be as tall as yours because she wants a two or three inch thick cushion.
Yeah, man, great video and I definitely wanted to say that I think the long videos are even better great presentation and information. The Air face frame grid is excellent. So well done thank you
I like the long form format. I'm learning a lot from your videos with all the details you show. I'm still only a beginner but feel I can tackle some of the larger projects I have to do around my house. You break it down which makes it appear more doable for the average woodworker. Thank you.
We learn more with long videos. The little tidbits like the nuance with the screws makes the difference. I actually want to do a built-in couch, which would be much bigger than this bench. Scribing it to my walls would be a challenge in my old house. Great job. Looking forward to the next long video.
Nice build. I like the long form. Usually takes a few visits to watch the whole thing, but that’s ok. Circle back if you can and show us the finished product. I really liked the window sills with the bench. Keep referencing the tools you use. They might be out of my league at times, but it’s nice to know what quality builders use.
Another nice video Spencer! I built a similar bench this year and made the top out of 1 inch maple hardwood. I used Blum European style concealed hinges instead of a piano hinge. I also added Sugatsune soft down hardware to hold the doors up and prevent the doors from slamming down and pinching fingers.
Love all of your content, Spencer.... You really are one of the best teachers out there on YT.... I'm certainly content with less videos, but with the longer format.... Don't ever feel pressure from viewers in terms of how much YT output you do. You have a mountain of old videos we can always refer back to, and I have done that myself from time to time.
Well done. I appreciate the longer format. Two suggestions: 1. Install a booted hvac duct instead of just a cavity under the cabinet. That would be a higher quality job. 2. Add an electrical box to front of cabinet (as part of design, romex could be hidden/protected), that way owners won’t have to run extension cords.
Just made a bench banquette. And I wish I could turn back time and used a few more of your methods here. Great content filled with valuable information!
Really like the long form just wish you showed the install. I’m a cabinet installer and learned so much from you over the past 5 years that has really stepped my game up. Thanks and keep up the good work. Your the best
Love how you take the time to go into detail, you make it easy to understand. Your work is impeccable,such perfection, nice to see that you take pride in what you make. BEAUTIFUL
I always happy to see your videos. In the video you mentioned at soft close mechanism can be installed if desired. Lid supports are absolutely necessary. THIS IS A SERIOUS ISSUE AND DESERVES TO BE PINNED. In the 1970's many toy boxes and hope chests were recalled due to children's heads being trapped between the edge of the box and the lid. Search "toy box strangulation hazard." Many results refer to Hope Chests that locked with children inside but the choking hazard is even greater.
Omg my bf legit just built this exact bench, with the storage boxes and all a couple weeks ago for a client, they wanted it for a breakfast nook in their kitchen 😍 they loved it ☺️ .. craaazy 😆🥰
I hv been a finish guy long enough to know better ? I don’t make detailed drawings and that is a huge mistake because I get into “ Watching Making” like you said . I just call it crazy time! Because it drives me nuts then I turn around and do it again. Great Video!
With the overhang of the window sills, i suspect that played into the planning of the placement and dimensions of the flip up tops so they would open all the way without hitting the sills. It would be good if you showed more of the planning process. Great work!
Love the detail information and techniques but wish you could show the installation process also as I am would love to see how you scribe both ends to fit perfectly.
We always make 1/4 inch slots in 3/4 poplar for vents. Plunge it in and out. Very fast and looks awsome. It's not removable but who is really getting in there to dust? I do like your double roundover detail though. My way is quick onsite with no gluing and clamping. Set your start point and move the fence 1/2 inch per pass. Gives you 1/4 inch space and 1/4 slits.
Looks great. Love your steps for the build. Past experience the 4 vertical dividers meeting the floor i like to arch the bottom of them to prevent cabinets from rocking if floor is uneven. Love the channel keep up the great work 👍 big fan.
Great content. Project looks great too. I too was going to ask about some kind of a foil insulation lining up that vent compartment. Toekick vents are the worst - all they do is heat up the cabinet it seems.
nice job, love the louvers .I just built one and they dont like piano hinges so I installed barrel hinges and they look and work great, very easy to install.thats now how ill do all built ins.
I have built a bunch of window seats similar to that I have gotten away from the flip top and have gone to drawers . 3 big ones in your design . , i talk the homowner into it . Especially if theywant to put a cushion on top . Better accesability and you dont have to move the pad to get to the top . They are always happy when done . Nice job though
I get excited and motivated when I see that Spencer has posted a new video. I then go into the shop and discover I have more in common with Tim Taylor than I do with Spencer Lewis...
I get a lot out of all the videos you upload, especially with the longer format. You are great at sharing the important details in a clear and concise manner.
Greatest creator on RUclips. Don't ever stop.
I enjoy the detailed, longer videos. Learning a lot from your style over the years - thanks!
Love the longer videos. I get a ton out of them. That’s how I learned to do my first tread, riser and stair skirt install. I have learned so much from your content. Thank you!
I like the long form. Shows awesome detail into these kind of builds.
Excellent job! CHAPTERS -- Labeled and Time Stamped -- makes finding specific topics a breeze...THANK YOU.
Long form video is good Spencer keep them coming. Thanks, I hope your wife is doing well. God Bless.
Love it, I have learned and grown so much because of you. Thanks for the fantastic video, as always!
Super crispy!! Luv the longer vids. Very detailed and tons of info. Keep the pedal down!!
Love your attention to detail and expert workmanship
The long form videos are best. They point out all the possible failures that can occur throughout the project. It would be interesting to see how you scribed the face frame.
Thanks for Sharing Spencer the valuable tips and tricks and the absolutely amazing build as always.
Long form is great. More please.
A little late here, but hey I love the long detail video. I would have even liked a couple more minutes to see you scribing the edges to fit so nice.
Thanks for sharing your work with us
Another well explained process.
One point is seldom made for carcass construction.
Plywood is seldom square,so starting with a fresh/square cut on plywood.....is as important as squaring ends of the faceframe.
That is why most sheet goods are 1” over sized.👍🏝️🇨🇦
@troyqueen9503 yes but the uninformed do not understand this!
Great job on the builtins, Spencer. I do these all the time. Two things I like to do during install is to (1) seal the cabinet to the floor where the vent is with Lexel or some other form of a silicone sealant, and (2) use duct board or some other form of a rigid foam insulation for the vent. This will provide a dramatic improvement in airflow from the vent going where you want it to go, and prevent condensation buildup in the cabinet during the summer months when the A/C is running.
I have found that here in south Louisiana, we run our air conditioners practically year round, and the bottom of the cabinet can get quite cold from the vent having constant air flow. I would imagine that in the winter, when the heat is on, the opposite would be true for your climate. Rigid foam with the foil face can help to mitigate these problems.
You are a master! Congratulations!
I really Like the Long form Videos because they give more detail as to why you are doing something . Thanks Spencer, please keep them coming.
Totally agree, plus the little tips that are actually super helpful that might get left out of a shorter video.
‘Beautiful work! Love the long form videos. Thanks!
I like the long form build format. That said, this could be a two-parter. I would have enjoyed to see more details with the top build and especially the install. I can't picture how you scribed that unit as one piece between the walls.
Good to have you back and thank you for the time it takes to put out content like this!
It was tricky scribing those pieces in. Honestly it would have been pretty advanced for the vast majority of viewers so video performance dips too low if I get to detailed. Essentially when video performance drops the algorithm won't serve up future videos to viewers so it's a careful titerope I have to walk.
This came at the perfect time as I’m about to build one in my family room so my wife can sit and watch the birds in the backyard. I was going to use built in draws, but I like the lid panels better. Mine won’t be as tall as yours because she wants a two or three inch thick cushion.
Awesome work! Would love to see the installs as well. That’s the hardest part for me
Love the long form videos. The more we can learn the better. Thank you Spencer.
The master - builder and educator. Content is soooo good.
Finally get to see the new shop in full production mode. You have it set up perfectly for this project. I’m sorta jealous
Not too long. Just right in my book with enough detail to make it educational and keep it interesting!
Love the long form content and the sound business advice in addition to the master finisher carpenter tips! Keep up the GREAT work please!
Yeah, man, great video and I definitely wanted to say that I think the long videos are even better great presentation and information. The Air face frame grid is excellent. So well done thank you
Your advice on plunge cutting was very informative. Thank you for that.
I like the long form format. I'm learning a lot from your videos with all the details you show. I'm still only a beginner but feel I can tackle some of the larger projects I have to do around my house. You break it down which makes it appear more doable for the average woodworker. Thank you.
longer and more in depth is fine with me. thanks for sharing your expertise!!! Bruce in monroe, GA
We learn more with long videos. The little tidbits like the nuance with the screws makes the difference. I actually want to do a built-in couch, which would be much bigger than this bench. Scribing it to my walls would be a challenge in my old house. Great job. Looking forward to the next long video.
Nice build. I like the long form. Usually takes a few visits to watch the whole thing, but that’s ok. Circle back if you can and show us the finished product. I really liked the window sills with the bench. Keep referencing the tools you use. They might be out of my league at times, but it’s nice to know what quality builders use.
Long format rivaling Next Level Carpentry. Great stuff. Lots of hidden gems if you're paying attention.
I like the longer form video. Your knowledge is worth sharing, thank you.
I love watching this channel because you don’t stick to one brand rather the best tool for the job
Long videos for sure, thats why i watch your channel
Long format is fine with me. I like all your videos, explanations, caveats and tips. Good content, helps me minimize my cursing.
Thanks Spencer 👍👍
I always enjoy our content. Thank you.
Another nice video Spencer! I built a similar bench this year and made the top out of 1 inch maple hardwood. I used Blum European style concealed hinges instead of a piano hinge. I also added Sugatsune soft down hardware to hold the doors up and prevent the doors from slamming down and pinching fingers.
Beautiful outcome! The grain matching on the top is so nice 🤩🏆🇨🇦
Nicely done. I might have added a sheet metal duct to protect wood and better direct air flow.
I like the extended videos. Allows time to teach more of the nuances as you did in this one.
Looks great man, and I don’t mind the longer videos. Appreciate all the effort you put into detail and making all these videos.
Love all of your content, Spencer.... You really are one of the best teachers out there on YT.... I'm certainly content with less videos, but with the longer format.... Don't ever feel pressure from viewers in terms of how much YT output you do. You have a mountain of old videos we can always refer back to, and I have done that myself from time to time.
Love it. Please do more long form videos.
I have decided to watch all of your videos to up my game 😀
Beautiful craftsmanship!
Beautiful results. Longer video is great. Glad you are posting again.
Super job! I love the planning before the first cut is made. I’m sure the customer will be pleased with the finished product.
Best channel on RUclips hands down Spencer 💯💪
Love the long form!
Good one. would love to see a video on making the window "sill", scribing it... etc.
that was behind the bench in the window. Thanks!
How do you scribe a box that's the size of, or larger than the opening, into the opening? Wished you would have shown that.
oh man I loved this video!
Long Form Content is Great!!!!!!!!!!!!!!!! Great Work! Many Thanks
I love the longer format. I have two of these to do early next year; but in angled alcoves. I learnt a lot from this video. Thanks
I like the long form content. The cabinet turned out beautifully.
The longer format has place at the table. Great for treadmill listening.
Nice built in. You gave many handy construction and design tips. I like to add toy box lid supports to prevent the lid from slamming down on fingers.
The long form content is great. Keep em coming. I'm glad you're back at it regularly on RUclips. I hope all is well with you're family.
Great safety discussion on plunge cuts on the table saw with no sa$safety glasses😂
Really enjoy these long form videos! Practical and efficiency tips greatly appreciated!
Well done. I appreciate the longer format. Two suggestions: 1. Install a booted hvac duct instead of just a cavity under the cabinet. That would be a higher quality job. 2. Add an electrical box to front of cabinet (as part of design, romex could be hidden/protected), that way owners won’t have to run extension cords.
Just made a bench banquette. And I wish I could turn back time and used a few more of your methods here. Great content filled with valuable information!
Really like the long form just wish you showed the install. I’m a cabinet installer and learned so much from you over the past 5 years that has really stepped my game up. Thanks and keep up the good work. Your the best
Love how you take the time to go into detail, you make it easy to understand. Your work is impeccable,such perfection, nice to see that you take pride in what you make. BEAUTIFUL
I always happy to see your videos. In the video you mentioned at soft close mechanism can be installed if desired. Lid supports are absolutely necessary. THIS IS A SERIOUS ISSUE AND DESERVES TO BE PINNED. In the 1970's many toy boxes and hope chests were recalled due to children's heads being trapped between the edge of the box and the lid. Search "toy box strangulation hazard." Many results refer to Hope Chests that locked with children inside but the choking hazard is even greater.
I'm totally cool with the long format. I would love to know more about making the plans.
Enjoyed the detail of the longer format!
Nice video It was not too long and very instructive Marc from Belgium
Omg my bf legit just built this exact bench, with the storage boxes and all a couple weeks ago for a client, they wanted it for a breakfast nook in their kitchen 😍 they loved it ☺️ .. craaazy 😆🥰
Another terrific video. You are a great teacher. 🙏🖖
I hv been a finish guy long enough to know better ? I don’t make detailed drawings and that is a huge mistake because I get into “ Watching Making” like you said . I just call it crazy time! Because it drives me nuts then I turn around and do it again. Great Video!
With the overhang of the window sills, i suspect that played into the planning of the placement and dimensions of the flip up tops so they would open all the way without hitting the sills. It would be good if you showed more of the planning process. Great work!
Love the detail information and techniques but wish you could show the installation process also as I am would love to see how you scribe both ends to fit perfectly.
Great video. Would be good to see how you fit/scribe something like that into the space. Keep up the great work.
We always make 1/4 inch slots in 3/4 poplar for vents. Plunge it in and out. Very fast and looks awsome. It's not removable but who is really getting in there to dust? I do like your double roundover detail though. My way is quick onsite with no gluing and clamping. Set your start point and move the fence 1/2 inch per pass. Gives you 1/4 inch space and 1/4 slits.
Great video and the long format is great.
Love the long form. TONS of valuable info throughout
Looks great. Love your steps for the build. Past experience the 4 vertical dividers meeting the floor i like to arch the bottom of them to prevent cabinets from rocking if floor is uneven. Love the channel keep up the great work 👍 big fan.
Absolutely first class, as usual
Oh I enjoy the longer videos & get a ton of knowledge from them!
I like the long form because of the amount of detail.
Beautiful workmanship !!! Great information on being efficient.
Great build. It is a good idea to but your small radius or eve a 5/32' radius on the back-underside of the lid.
Love the long form videos Spencer, always learn something. Around 33:08, I'd love more info on your tape/pencil rig!
Your long form videos are excellent!
Long form is very instructive....Nice work!!
Love the detailed long form content. Keep doing what you are doing.
Thanks for sharing. Love the long form as well
Great content. Project looks great too. I too was going to ask about some kind of a foil insulation lining up that vent compartment. Toekick vents are the worst - all they do is heat up the cabinet it seems.
Loved the video, but I would have really liked to see a detail on the install of the piano hinges.
Nice, tops are great..I'm in on long form, really appreciate it man, I gain on every one...
Nice shop Lew, great project.
Great work as usual. I build the same way except if I’m trying to match panels to shaker doors the reveal has to shallower. 🤙🏼
nice job, love the louvers .I just built one and they dont like piano hinges so I installed barrel hinges and they look and work great, very easy to install.thats now how ill do all built ins.
I have built a bunch of window seats similar to that
I have gotten away from the flip top and have gone to drawers . 3 big ones in your design . , i talk the homowner into it . Especially if theywant to put a cushion on top .
Better accesability and you dont have to move the pad to get to the top . They are always happy when done .
Nice job though
I agree, I have a large window unit in my own house with large drawers and its great.
Love the long form videos
Great job, Spencer.