Universal Toilet Handle - Korky Toilet Repair

www.korky.com/...
Hello and Welcome to Korky Toilet Repair.
Today we will show you how to install Universal Toilet Handle.
We’ll start by detaching the chain from the lever arm and removing your old lever. The locking nut is reserve threaded.
Remove the two red locking clips and set them aside for later.
Separate the arm and elbow.
Then remove the mounting nut.
The mounting nut is reverse threaded, right for loose, left for tight
The handle can be mounted in various ways: angled mount, front mount, and side mount.
Insert the handle assembly into the tank hole and secure the nut on the inside of the tank.
Attach the elbow at the angle shown.
Position the arm parallel to the front of the tank then attach the lever arm to the elbow.
Insert the locking clips.
The clips can be installed on either side.
To attach the flapper chain, clip it to the lever with minimal slack.
Do not pull the lever arm down to attach the chain.
You may need to cut the excess chain.
If the chain is short of your lever arm try adjusting the elbow’s angle like this.
Replace the lid & flush your toilet to make sure the toilet bowl clears properly.
The lever should not touch any other parts in your toilet tank. If your lever arm is hitting the lid adjust the elbow angle
For other premium handle design and finishes, Korky also offers the StrongARM line of levers.
Congratulations, you have successfully installed your new Universal toilet handle.
Thank you for choosing Korky.
If you have any questions or need further assistance please contact us.