C5 X7 Noisy door hindge (limiter) teardown and analysis
HTML-код
- Опубликовано: 29 сен 2024
- Welcome citroen drivers!
In this episode I am dissasembling a noisy Citroen C5 X7 door hindge and trying to figure out why it is making clunky noises.
If you find this video informative - leave a like or a comment and, ofcourse, SUBSCRIBE, it will keep me motivated to make more videos about this car.
Music in the background:
SYNERGY by tubebackr | / tubebackr
Music promoted by www.free-stock...
Attribution-NoDerivs 3.0 Unported (CC BY-ND 3.0)
creativecommon...
Play Easy by tubebackr | / tubebackr
Music promoted by www.free-stock...
Attribution-NoDerivs 3.0 Unported (CC BY-ND 3.0)
creativecommon... - Хобби
I thought I could fix one of these hinges but after seeing this video and how hard it is to open - naaaa - I will have to buy new ones - its simpler.
It really is a bad system!
The worst I ever seen !
First it is not reliable at all (on my car baught new) the passenger front door is noisy from the beginning, but still works.
Second you have to remove the door to change it
Third it cannot be fixed!
Link do filmu gdzie jest pokazane jak samemu wymienić zawiasy bez zdejmowania drzw.
ruclips.net/video/3wTzUlpXY60/видео.htmlsi=yUnkgeiXsBsg-Zlv
Hi. First of all congratulations for your videos. Secondly, is it possible to give me some advices for replacing of a same door hinge (driver's side) due to same failure. Thank you
Hi, thanks.
Well, as I have said in one comment lower, firstly door has to be removed by undoing its bolts from the hindge, then the hidge itself can be removed. Nothing difficult, except the weight of the door... I do not recommend used ones, unless you can get them from low mileage car and from rear doors, as they are used much less and will have more chances to be ok for long time.
very nice explained. thank you
two of my 2009 C5 doors have this problem. The reason the other two don't is because the previous owner took the damper / limiters from the rears doors and put them in the front 😞
Having watched this (thank you), I'm not going to bother opening them up! I can get a pair of new ones for just under £100
I thought I couldn't believe my eyes when he cut open the door hanger with the Ex ribbon.😢But very interesting insightful video, thanks for the great work with the film too.❤
Can you drill it and add some grease? Will it fix the problem?
Well, it might prevent it from sticking for some time
Exactly what I was about to ask. Did you try it?🇸🇪
My drivers door does this. Its infuriating
_* IT WAS INTERESTING, BUT IT WAS A PITY FOR THE LOOP*_
Excellent job, thanks a lot
Thank you for your video! I have a problem that my door makes noise and dont snap into place and close. I think the pin is nlt broken is there a way to repair this or do i have to change it
instablaster.
Thank you
Hi mate! How did you exchange the door hinge? Do you need to remove the whole door and is it possible to exchange with only the door opened?
Hi. Unfotunatelly, door has to be removed completely. Firstly undo bolts from the door, remove it, change the hindge, put the door back on. Be carefull not to damage the paint, second person is a must I would say, because door is quite heavy part.
@@rustoil thanks a lot buddy! You've got good videos and very nice car. Take care.
@@cheizer thanks ;)
👍