Видео

Hello and thank you for the excellent video = you gave me the courage to build a greenhouse. Karel / Czech Republic / Děčín

Thankyou Sir Video Looks Good For me to with COPD

why are u using a leveler for every side part ur installing? the holes are pre-drilled and it will stay steady after all the parts are installed correct?

😊

Alot going on but no instructions like how is the poly carb fixed in place

Weed control fabric maybe also ...... 🤔... 4 years since you did this .... I'd really be interested to know how it's doing now?

@3:18 or so you are putting up the door frame but you have already assembled parts 7311 & 8378 using the 4045 screws. Did you simply drill the screws through at the indentations? This seems incredibly hard.

This was really helpful too!

This was really helpful! Thank you!

How did you manage to get your screws in? You can't go in straight because of the lip

If you choose paint on decking,you are going to have to repaint almost every year.

Wow! Can u do my shed. That's great..

What’s the measurements

Skip the annoying music ! Just talk

HI Kyle I have bought this exact greenhouses but the opening window seems to just sit at the top on a ledge and no hinges so just keeps falling out when you open it etc any advice appreciated.

How long did you leavd between coats?

I have to do this every dam year. Cost a fortune 🤦

Thanks

Thank you it was helpfull ! I watched your previous video on how to build a base to your greenhouse cause that's the method i wanted to use and i didn't realised i bought the exact same greenhouse ( in green) so watching this video i thought ''well it looks familiar'' 😅

I'd be worried about that. Bit of a sub base and a go with a garden roller at least I think. I mean, your putting a greenhouse on top of it. You want to get a few years out it. Unless you're building the greenhouse to anchor into the grass around the slabs and can always redo them if you need to I wouldn't trust it

This how I intend on doing our shed base, has your base held up OK? Thanks for the video btw

May I ask what the name and color of that stain you used? Very nice 😊

So pleased I found your great video.. thank you. How have you found this greenhouse through the stormy weather ?

Definitely resourceful use of generic pallets

I liked your video,will it be safe to use cement on vegetable garden? Can I have a greenhouse without the slab base?

Everyone I see drills the pump cord on the bottom why not drill that hole above the water line so you don't have to make sure its water leak proof.

Hi, i am located in India how can I purchase this product,does it contain any building manual ?

me encanta !!!

I purchased the Harmony , and what a load of rubbish nothing lined up , bits missing and the plastic panels were cut badly they would not fit so I had to cut them again to fit , Im stuck with it now waste of money.

Would you consider running the pallet board once at least through a planer?

You need hard-core this is wrong advice

Great help, me and my son want to get a shed and i didn't have a clue how to build a base, what type of sand did you use pls? Would appreciate it if you can get back to me, thanks, J

Glad I found this video , as thinking of getting one of the polycarbonate green houses in the new year

Smashing job

Nice

I found it quite amusing. Could have been edited to 10% of the length. Most people know how to use a broom. Should have been 10 secs, sweep away leaves, 20 secs jet wash, 15 secs paint deck, 10 secs paint hand rail then 20 secs showing dried first coat and then the same panning around the finished effort with some close ups of the finish.

My window falls down l was hoping to see if I'd missed something but like the previous person wrote, no close ups 😕

Having a hard time finding a video that actually shows how to assemble the top triangle oieces above the door.

Just done mine with this exact same stain, the colour is really vivid and has totally revived my tired old deck, excellent product

Really nicely done!

nicely done

Can anyone suggest a brush or roller or pad for a larger decking area. About 20ft x 15ft

I think for a basic shed/greenhouse with a life expectancy over 5 years you need a slightly better base than this. You don't need 10cm hardcore whackered, you're not building a driveway! But you will need probably somewhere between 3-5cm of compacted MOT under a dry mix like this for it to last 5-10 years min. If you're renting though or moving in the next few years this will do.

how come you are not wetting the mix isn't just sand good enough in this case, as cements just pretty much dust in comparison to sand.

No it needs deeper, I would recommend at least half a meter of aggregate and then at least 1 foot of sand and cement mixed 3 parts Sand to 1 part cement and then of top of that 3 layers of tiles with cement between them all, and a week to dry inbetween each layer. Then once that’s done get some gypsies in to tarmac 30cm of tarmac onto it, then above that 2 more layers of tiles and some sand and cement on the corners. Then on top of that a pressure treated wooden base and then a metal shed base. Then finally a teak or oak flooring. Then once you’ve done that can put some marble tiles on top. Then your shed is ready to be constructed with a a few more pressure treated wooden bases on top, and a damp proof course, then two more layers of oak planks and a few railway sleepers. It should last at least 4 to 5 years.

@Kyle Do you have a video of making the concrete pad shown in this video? I did budget for a 4" concrete pad but wondering if what you did would suffice and the cost difference. thanks

Hi Kyle, Thank you +++for this really helpful video- I have watched it many times and it meant we have built our Palram relatively effortlessly. Please can I ask do you have any problem with the door tending to not fully close at the top even when the magnet on the bottom is engaged with the base? My husband has solved it for now with a large metal paper clip which is doing the job brilliantly but I wonder if anyone else has a similar issue

thanks for sharing. I need to cut a slit on top of a stripped screw (damaged by using Phillips screwdriver) so I can unscrew it with a flat-up screwdriver. Will still cut the screw? thanks

you have done the same mistaken as me the corner posts are wrong in your video they are 996 parts should be 9802 ones you have put in are for the roof they have locating holes the corner uprights have none ,be honest and tell the truth

What was the name of the cement tiles you used. The size in cm