Видео

Watch our review video and we beak down the cost. ruclips.net/video/Z2iOz0cNs2c/видео.html It is not cheap! But overall cost depends on how much you need.

You can buy the Pro Am wheels for $159. www.proamusa.com/products/solidtrax-universal-track-dolly-diy-wheel-set-for-modus Or you might want to look into the movmax dolly for $299 which is a professional level dolly. www.bhphotovideo.com/c/product/1785351-REG/movmax_83_0054_grip_dolly.html We did several videos about the movmax, how to add a mounting plate for $10, some accessories and a review. That would be the best option rather than dumping more money into the glide gear dolly. We also did a video about the Pro Am wheels and how to build your own dolly,

We actually had to buy 2 cables and splice them together. I ordered the plugs to replace one end so I could plug them together, but it was way to hard for me attach them, so I just cut them off and soldered the wires together. But I just checked eBay and now I see them up to 10 meters for $55. Here is the link www.ebay.com/itm/126100332883

@@mrdogpoopstudios THANK YOU SO MUCH FOR THE INFO

@@yolkiscabrera3513 You are very welcome!

Why are they not skateboard wheels? Don't skateboarders use all kinds of different wheels depending on what the user wants from their board? Having all types wheels is really good for us, because that gives us lots of options for our track dollies, Dana Dollies etc, sine we don't have movie equipment wheels. We just have to use what is available.

Right around 96 when they are new. But like all LEDs, the more you use them the less useful they are. So CRI is really nonsense after the first 10 hours of use. Check out this video we did explaining and demonstrating how LEDs burn out. ruclips.net/video/VHHC2gy65Zg/видео.html

I actually like the cheap GideGear track with a dolly and skate wheels. Do not get the Glide Gear wheels, but having a tripod that you can push at any height level over light weight tracks is great. The track is light and will not bump like the heavier track with bigger gaps. However, that is for one person at one level, unless you add a jib to the tripod. If you need a camera man on a dolly, we still have not found a good budget option. We were hoping the proaim track would be that solution. Proaim contacted me after they saw video and they are working on improving the tracks. When they do, it should be much better.

I hope you watch some of our other lighting videos, like using the parking lot lights, RGB flood lights and how we use $10 lights and a $10 umbrella as a difuser. Also using cheap cellophane wrapping paper to get colors. You can do a lot without spending a lot of money on lights. I am glad you found it and it was helpful.

Thanks, trying to keep the lighting budget low. But we still need bright lights.

We are working on it. Got tied up with some studio business, but we have more episodes coming.

Honestly, we had it for 2 years and have not used it one time. Buy a DJI Ronin gimble and you will get more use out of it. The steadicam is old technology and has a steep learning curve. I had multiple videographers and they picked up the Ronin RS2 in less than a day. Watch this behind the scenes video: ruclips.net/video/7e_zVfOidbc/видео.html You can see one of my video guys running with the ronin, you can check out our unleashed channel to see the final video.

Some of our simple ideas get out of hand. Glad you liked it.

The man is a PROFESSIONAL!

That would be great, except we would have to learn how to do that. We can only share what we know and what we have done. It is true, that more people would watch if we showed it on Divinci but we just do not use it and would not know where to start.

Yup, those are the ones. The company does specialize in old stuff mostly as movie props. But they are asking Hollywood prices for old nonworking junk. The stuff is priced out of our budget and the cost of fixing, makes it that much worse.

I have not tried the Proaim Breeza, but Proaim is hit and miss. Some things are good and some are bad, but never great. The movmax, is great and Proaim will never reach the quality of the Movmax. You can buy the Movmax with free shipping from B&H, if you just want the standard kit it is $499, just the 100mm and 75mm bowl adapters, do you really need the 150mm and Mitchell mount? www.bhphotovideo.com/c/product/1785350-REG/movmax_83_0053_grip_dolly_basic_kit.html Buy the Movmax, you wont believe how nice it is.

These would be good for a ski resort in the summer to make rides down the mountain. Other than that, pretty useless.

@@mrdogpoopstudios We have that at Heavenly :)

It's a lie! The video guy is no more, he was using editing magic to make it look like it is all one person. But I took care of his ass, he wont be doing that again. I assure you, Mr Dog Poop and the Lazy Ass maintenance man are 2 different people.

Did you use your own tubes? Or Proaim? Did the machining do what you wanted?

@@mrdogpoopstudios yes, I used my own tubes. The plan was to use star threaded tube inserts but now having tried to put them in: a) it's hard to get them in really straight and to align the tubes and b) it'll wear the tube ends off a little every time you twist the tubes against another. Speaking of wasting money 🤑

@@HighlyAkicktive That is why we buy sometimes instead of building. Some of our $200 builds are more like $2000 with all the mistakes we made and then made changes to get down to $200.

@@mrdogpoopstudios yeah I know, sometimes you gotta learn the hard way. I can probably still make use of it and put an insert into one end and use bolts to hold it in place. Just need to find a way so that the female tube won't budge when getting tightened

Thanks for subscribing and I am happy we helped somebody. We do come up with some unique ideas and hopefully cheaper ways of doing things.

I thought about that. I was considering using aluminum duct tape, which I love, to bridge the gap. Have not tried it, but something like that might help. This is a link, I think it is the right stuff ( www.lowes.com/pd/3M-3M-8482-Professional-Grade-Flexible-HVAC-Sealing-Tape-1-88in-x-30yds/5001605999 ). Don't get me wrong, it is usable, I just don't think for $700 that it is worth the money. They have other track, but it is more expensive. But I would avoid Proaim track, because if one is bad then how can we expect the other to be good? I was really disappointed. But I will probably use it as speed rail to make a large scrim since it is standard 1.25 schedule 40 pipe. Just need the corners and I am good to go. A bit more expensive than plain aluminum pipe, but not a total loss.

Yeah, I figured that. The issue is, doing it and keeping it light enough to be usable and not creating shadows. We tried a second version with lighting truss but it was too heavy to move and still had flex. My original thought was to use speed-rail fittings and get 45° fittings to brace the top and side rail. But it would not solve the side to side floppyness. I was thinking about putting a square in the center of each pole and connecting each corner with each end with cable. It is a common design on large booms and might work, but it is going to take a bunch of time and money and at the moment, the project is on hold. It works well at 5'-6' just not at 10'.

@@mrdogpoopstudios The rig and effect you get can look very good, but as a key grip the rig only makes sense to build on a small scale. The bigger you go with a rig such as this the more crew, budget etc you will need. NOT TO MENTION SAFETY.

@@recardosands9948 Yeah, that is true and we were trying to figure out how to manage the weight and span. One idea was a hand crank or electric drive that would allow a smooth safe arcing motion. But first, we need to get the stability issue worked out. Safety was definitely a concern when we started mounting it to the dolly and the dolly was rolling. All reasons it is on the shelf right now except for smaller scale.

If a guy Named Mr Dog Poop can make movies, anything is possible.

It is standard track 24.5". You can get it from Matthews Studio Equipment or anyone that builds compatible track. Here is a link to Matthews track. www.msegrip.com/products/track-sst?variant=12807181566018 If you can find some used you can save a lot of money. But it is hard to find.

@@mrdogpoopstudios Thanks I appreciate it!

We ordered the Proaim 16' tracks, should be here this week, so we plan to do a review on that as well and many other products we already have. Thanks for subscribing.

That is what my mom keeps telling me.

@@mrdogpoopstudios 🤣🤣🤣🤣

That is what we are shooting for, inspiring people. And hopefully showing people how to save money and make great content without expensive gear.

I am glad somebody is getting value out of our videos. We love doing them, so I hope more people watch them. Thank you for the encouragement.

We are both really amazing actresses! Thanks for the recognition.

Comes from trying to save money.

What part about Mr Dog Poop studios and an old grumpy man drinking a beer made you think it safe for kids? Sorry, at my age, I cannot really control what my mouth does.

Sure! Do you have any acting experience? We are looking for a new sidekick, Fat Chris is gone, died of over eating.

Glide Gear has some great products you can check out some deals on a video we did about those: ruclips.net/video/_pHIVpy0Vrg/видео.html The only product we hate is their wheels and anything that uses their wheels. They are so bad they are completely useless. They need to get some new wheels, they are junk. We did an entire video about them. But they sell some of the same products as other companies and some of them are very useful and inexpensive.

We built it fr about $200 using some front axles from one of those electric mobility scooters. We got them on ebay for $40 each and connected them with some 1" steel tube. The platform is a cut out from a wood kitchen counter top for a sink installation. It was scrap but too nice to throw out. We wanted to build another one and do a video on how, but I don't know if we will have time.

@@mrdogpoopstudios I was not familiar with the doorway dolly name. Looks interesting. Was not familiar win ProAim, they seem to have a lot of different solutions. Thanks

You will not regret it, the quality is amazing. But I see now they have raised the price to $1299. I am glad I got mine when it was cheaper. Just a note, Vaxis does sell other parts that I did not know about including safety or anti top pieces. www.vaxisglobal.com/Grip-Dolly-c917820.html I ordered the ones with wheels and the under slung adapters but still have not received them yet. They also have more attachments but I can't find them for sale anyplace.

@@mrdogpoopstudios yeah I found the site last night after wondering where to get underslung parts since it’s not on MOVMax site. Will definitely be getting all the accessories.

@@tylerjanik2132 So there are more parts as well if you contact the US Vaxis dealer in LA. I have not seen any of the accessories for sale online. But they are calling the grip dolly a platform and plan to make many more accessories for it. They have attachments to make it a High Hat to use off tracks for static shots. I think they will keep developing new toys for it.

@@mrdogpoopstudios yeah I love that idea of having a whole ecosystem for the movmax and it not just being an alternative to a Dana Dolly. I’ll have to contact the dealer to check out the other accessories. Me and my brother spent hours testing it yesterday and it is fantastic.

OK, bunker video coming this week, promise.

We have a list of videos to do, hoping to shoot one or two this coming week. We have been concentrating on our studio so we can start full time on our other channels. Have you checked out our Mr Dog Poop Unleashed like out Monkey Pox Video? ruclips.net/video/WVmf2Uc-3po/видео.html

Watch our 4th of July video!

We got it on ebay, but they are also available on amazon. It looks like vevor.com has one for $275 but amazon has the same vevor oven for $257. You can find them under $200 but those are good places to look. It does look really cool in the kitchen set up.

@@mrdogpoopstudios Thank you so much I really appreciate, I try to do a basic and small kitchen set up, thank you so much for your help 😊 and good luck with your channel, Im a new subscriber 😊 I really love it!

Yeah, we just wish someone watched our cooking channel, it was a flop.

@@mrdogpoopstudios Do you have a food channel? GREAT!!! I started mine 2 years ago but I stoped bc lack of time... I'm back now but I need to set up a small kitchen studio so looking for ideas in youtube I found your channel 😊😊 whats your food channel name to follow 😊

@@FoodyTongs You can see the videos we did at www.youtube.com/@mrdogpoopcooks but with just a few views each we decided to discontinue it. In our case we have to break down the kitchen and move it so we can shoot other videos and that is just too much work for 30 views and no subs or growth.