Видео

Yes, I've had this comment before :-) I've half done some colored captions for this video but haven't found the time to finish them yet!! Perhaps this will prompt me to do it. Thanks for watching.

Thanks for watching and commenting! If you want more flexibility with position and style of your captions, check out my other video here ruclips.net/video/I4NzRKf1u08/видео.html It's a little more effort but has more features. ... and for karaoke style captions, this one ruclips.net/video/xi_By0xA-8M/видео.html

Wow!! Someone with 684k subscribers showcased my video! That's more than a thousand times the number of subscribers I have. If you want real power to set your caption color, style and position, see my more recent video. Thanks for watching.

@markfisher8943 You could do this by making 2 different sections, a root section and a tip section. If you know the chord length of those 2 sections, you can make sections that have 2mm trailing edge thickness once scaled to the correct chord. One way to do this is just to locally thicken the trailing edge part of the section. This is possibly simpler but distorts the section. The more "correct" way is to stretch the section (scale in the x direction) and cut off the excess at the trailing edge. You need to work out the scale needed to give you 2mm at the trailing edge for each section. This method maintains the section profile and is generally preferred. Hope this makes sense. I've done this before, so let me know if you need help with this.

@@ITriedThis HI, Thanks so much. I'll need some help I think. I was traing to constrain the TE thickness in the Root wire model, thenscaling the tip, but just cannot make that happen. I am using ONDSEL, hopefully because the learning curve wont be so steep. I was hoping to create a wire for ribs say 100mm apart the full length of the wing extension (1400mm),. The TE edge is straight so I hoped to pickup the node of each rib to create a spline in the planform model. Lots to learn. Any help would be greatly appreciated. Where are you located?

Hi, There are only a few fonts that you can use that RUclips will recognise. If you use any other font, RUclips will replace it with the default. Check out my videos here ruclips.net/video/b4qSNGYK8QE/видео.html and here ruclips.net/video/I4NzRKf1u08/видео.html for which fonts you can use.

​@@ITriedThisThank you so much!!

Thanks for the comment! Interesting looking glider. Do you mean full size glider or RC model? I've had a second video 75% prepared for about 18months, but can't find the time to finish it. It looks at a method to make a smooth arbitrary shape (e.g a fuselage) if you can't make it from standard shapes like circular sections. I'll try to post it soon. Let me know how it goes with the wing tip.

@@ITriedThis I downloaded your Macro, . Its viible from Macro menu, but, when I Execute nothing happens. I must admit I am using ONDSEL. Maybe thats the issue.? Any ideas

FYI. No luck in Freecad 0.18 either

@@markfisher8943 Not sure why it is not working, but below are a few things you can try. I just rechecked my macro again on Windows and the behaviour has changed, even though I haven't changed my FreeCAD installation!! I originally wrote this on Linux. 1. Check for error messages in the report window. If you have any, post them here. 2. Assuming no errors: Start with an empty model. Run the macro and check if you have a new item in the model window called 'BSpline' or similar. If so, the airfoil section has been created. If pressing the 'Fit All' button does not show the section, add the following to the end of the macro and repeat. FreeCAD.ActiveDocument.recompute() I have to do this on my Windows installation now to get the section to show. Never had to do it before? 3. If you don't get an object called BSpline or similar, you will need to do some debugging. You can add some commands to try to find out what's going on. For example, add the following just after the line that starts 'points.append' print(points) Make sure it starts in the first column (no leading spaces) because python has stupid indentation syntax instead of proper markers for code loops. The printout should appear in the report view. Try some print statements in different places to try to trace what is happening. Let me know what you find and I'll try to help.

Hi Chris, I can't remember when this started happening, but it happens for me too now. Maybe I had an earlier version of SubtitleEdit - not sure. You need to select the telext option. See my later video here ruclips.net/video/b4qSNGYK8QE/видео.html

@@ITriedThis Thanks so much - yes it must be on the later versions of SE. I had only used SRT format before and then burned the subtitles in.but STL is great which is why I found your videos so useful.

Yes, you're right! Unfortunately, the Japanese tend to take everything they catch to eat, so there aren't many big fish in most places in Japan. Hokkaido is the only place I went to where I saw some fish big enough for a main course.

Great! On a nymph or a dry? I seem to be a 50g specialist:-)

Yes, unfortunately support is a bit erratic. I've checked the youTube app on iPhone and Android (Samsung). Some features like colors do work on both but support for styles and other features is patchy and not consistent. I might do a video on that.

I don't know of a way to change the caption background color using EBU STL format (the format used in this video). With slightly more work you can do it if you use other formats. See my other video here ruclips.net/video/I4NzRKf1u08/видео.html

When you get the warning about loss of formatting, make sure you do nothing except publish the captions. I guess you've done this correctly or the styles would probably also be lost. Not sure why this is happening. Are you viewing on a computer or a phone? Some options don't work on some phone browsers. If you're viewing on a computer and still can't get it to work, I'd be happy to check a sample file if you can upload one somewhere or point me to a youtube video.

Thank you so much! This is the best comment I've ever had! I've fished a few places around the world and when I'm in a new place it is sometimes difficult to find information about places to fish, access, etc. I decided to make these videos mainly to show people what the river and the fishing is like in a particular location - the sort of thing I would find useful when looking for somewhere to fish. I don't seem to catch the big fish very often, so I just show what I catch. I do add some music sometimes, but that's so subjective. I often skip videos just because the music is annoying or just not to my taste, so it's a risk to add a lot of music to the video. I'm slow at producing the videos, so I have a bit of a backlog. I'm working on a final video from my trip to France last year and then I have another NZ trip to work on. Thanks for watching and thanks for taking the time to comment.

@@ITriedThis I skip an enormous number of videos just by seeing that they have someone who has created themselves an identity that is displayed at the beginning as i find that they are ego driven and the content that start with someone travelling and talking to themselves, effectively, I skip. My reason is I watch to get the fishing experiences of my past and as I have never gone fishing, looking into a mirror, talking to myself, all my thoughts out loud, nor been able to hover along above myself, nor hover over myself fishing, stuck my head under the water to view a struggling fish, nor made sure my face was close enough to the fish being released that I to was splashed and never ever had a soundtrack playing while I fished. I f it doesn’t relate to my experience of fishing I am unable to connect and so I don’t bother. Don’t take to heart too much of what I have said but do keep making your videos. Very well done.

​@jamescrydeman540 I second you to your comments mate. So many fishing videos you see on RUclips are ego driven. Particularly as you mention they talk to themselves and commentate as they are casting at a fish as if they own a water. There's more talking than the actual fishing some times and then there's the music.. Well.. The other thing I can't stand either in a lot of fishing channels they speak about how many fish they've caught at the end of that day on the river to confirm to themselves and have the audience hear out loud how well they have done and what they expect to catch on the river at the start of there day. That's all about your ego. Basically living in a world of arogance. I think some people are too big for there boots. It's just the way people portray themselves on camera some times as if they are automatically going to or expect to catch that fish. After all its called fishing, not catching and most humble fisherman don't speak out loud what they should expect and then talk about how surprised they are if things don't go there way.

What DID work for me was very simple- is scrolling to the bottom of the CC's option's menu where it has "Reset" and hitting that, NOW I have white text on black and it's readable again!

That's great! I'm glad it was useful. Thanks for watching and commenting.

I think I'm a small trout specialist!! It's the big ones I can't find 😊

Great! Post the link back here when you have an example I can look at.

@@ITriedThis Ta-da! (ruclips.net/video/iTfFXejLNeY/видео.html)

@@ypticVEV Very good! I watched it all the way through.

@@ITriedThis Great!

Thanks for the comment and thanks for watching! Glad it was useful. I use this method most of the time, but if I need to do something really wild, the other method is more flexible (but a few more steps). Check out my video about making karaoke subtitles for an example of what it can do.

Checked out your video - great! Glad this was useful.

Hi @usuben2224, Thanks for the comment. I usually use subtitle edit unless I need to do something it can't do; then I use Aegisub. That's for the reason you said - subtitle edit is easier to use and has fewer steps. I haven't had any issues passing the subtitles to RUclips, so for me that seems like the most efficient option.

@@ITriedThisI see now, thanks for the answer👍

Yes, I'm not sure what the problem is. I read somewhere that maybe there are some emissions from the volcano that kill the fish. If these happen frequently enough, the fish can't recover before the next event. The only river where I found fish in that region was the Patea River, but there may be others. Perhaps try further from the volcano.

Thanks! I'm trying to learn more boogie woogie, but finding it quite hard.

Thanks for the advice. I'll try to do that. I'm still playing this quite frequently so that I don't forget it!

@robsmith8024, for that stretch of river, I'd probably go for the shorter rod. There are lots of sections with overhanging trees where you need to stand in the river and cast under trees on both sides. The shorter rod would be an advantage. My 8 ft 6 inch rod is a bit long. You'll have fun with a 3 weight! I have another Alyn River video coming soon. Thanks for watching!

Thanks! I need to do my 2 year video now.

Hi @ruddynely6965 You need to have access to upload the subtitles to RUclips, so if I understand your question correctly, you won't be able to do that for other people's videos. If you can download the video, you'll be able to make the subtitles, but you need access to upload them.

Hi @colecarpenter3882, You can find it here ruclips.net/video/RzpscEhMciM/видео.html Thanks for watching. I hope it's useful or interesting. I had fun making this PC but the videos took ages to edit!!

😃One of my very early videos! I built this PC during covid - still going well! You can learn how to do anything on RUclips!! This series of videos is a useful record for me to see what I did if I ever need to fix anything, but not very interesting for anyone else.

I was disappointed when I lost this fish. It was the first big fish I'd hooked in Hokkaido. I went on to lose several more big Hokkaido trout on that trip! I built that rod from a kit. I replaced the standard butt with the fighting butt.

@@ITriedThis That is impressive to me! All my years of fly fishing (and I started in college back in 1991), I’ve never built my own rod. I made the mistake of purchasing a fiberglass three piece rod once for easier transportation, only to learn that it was so heavy compared to graphite, it completely wore my arm out. Long story short, I went back to graphite almost immediately (with far better results to show for it). Do keep putting these videos out as it makes your viewers feel like they are right there on the water with you. There’s an elderly gentleman named Graeme Pullen who has written and few books which I own now, but during Covid I was binge watching his RUclips videos which he calls THE TOTALLY AWSOME FISHING SHOW, and now has me believing I simply have to make it over there. Also, there’s this Scot on RUclips who calls himself, “Wildfisher” who’s fun to watch as well if you get a chance. Tight lines. 😇

@m.h.english4473 My reel is in storage for winter at the moment. I can't actually remember the make but I'll check next time I get it out and reply back here. I'm planning an Australia/New Zealand trip in March, so I'll report back in a few weeks. It's nothing very expensive.

@m.h.english4473 I haven't heard of that book before, but I can see there are some cheap second hand copies on eBay. I might get one. Thanks for the recommendation.

@m.h.english4473 Thanks for watching and your kind comments. I was working in Japan for a while, but now I'm based in the UK. I enjoyed Japan and the Japanese culture. Most places I tried on the main island were over-fished, but Hokkaido is a different story! It's one of my favourite places to fish and I've only just scratched the surface of what's there. I must make another trip soon.

Hi topperqfishing. There are lots of options! I assume you will have a car. If you want to stay near Auckland, check the Fish and Game information for Auckland Waikato region. I've put some links in the description of this video. Another option would be to drive to Taupo and fish the lake or some of the rivers I've shown in my videos. It's a 3hr drive from Auckland so you would need to stay for a few days to make it worthwhile. Note that you need a specific licence for the Taupo region. You get it from Department of Conservation. For other areas you get your licence from Fish and Game. I've put links in the description of this video. Take some video and upload to your channel - I would like to see it!

@@ITriedThis lovely info mate! Yes I'll sure drive south to have a go there. Cheers!

Great! Thanks for watching.

Thank you. Спасибо!