Видео

My Own.

I'm sorry, but not yet. I'm looking for motivation to buy RPi5 at all.

Expand the description, there is a download link.)

@@tomaskonvicka4135 wonderful crack✅️

Nie wiem, w czym tkwi problem. U mnie działa „Przycisk Home + Y”, lub X jeśli masz zamienione przyciski.

Dziękuję juz jest ok pozdrawiam jeszcze raz dzięki:)

Dzięki, stary. Miłej gry. Pozdrowienia z Czech.🕹💾

@@tomaskonvicka4135 mam problem z zapisaniem stanu gry superfrog automatyczny zapis potem wywala do menu.

Hello:) Thanx for nice words:) There is also download link via Arcade punks, it should work.)

@@tomaskonvicka4135 thanks for this, i think I did get this via arcade punks, but ill give it another try.

@@tomaskonvicka4135 hi and thanks again. I tried this (using the dropbox link on Arcade Punks) , flashed the img file to my SD card, and now get boot errors "invalid ELF header: start4.elf', and same message for "start.elf", followed by "firmware not found". I wonder if these are corrupt files in the image? Is there anything else I could try here (Ive spent a lot of time on this now - im desperate to get it working!)

@@SamCole-l7k It's probably a different version of the motherboard. Replace the files I'm sending you on the boot partition, you can also do this via PC. www.dropbox.com/t/OKQ5fgHXm68AI4zy

@@tomaskonvicka4135 many thanks again for your kind (and free!) support. Still no luck (coloured screen on boot, then nothing after a long wait). I think i will leave this for now, but thanks again, and good luch with your future projects :)

@@hachadorada Hi. It's filled to thé celling. Download version 1.1, fits on the 64gb SD card better. Or use 128 gb card.

@@tomaskonvicka4135 thanks, I'm now downloading the 32 gb version. I wonder if I can copy the additional amiga roms from this release into it later.

@@hachadorada I don't know what version you're downloading, if it's the "Only comps" version it can be combined with the content from the 64 GB version 1.1, but you'll have to do it via Linux. The Amiga content is the same, it's the other platforms content that's different. As I wrote the 64 GB version 1.1 should be able to be written to any SD card with no problem. (I recommend Samsung btw)

IHello:) f possible, go to Settings (cog wheel), Raspi config and there you can set the screen mode. Another option is to connect the card to the PC, there is a small "boot" partition, there you can find the config.txt file and write hdmi_group=2 hdmi_mode=16 instead of the current mode.

@tomaskonvicka4135 thank you very much. I'll try! ♥️

@@tomaskonvicka4135 it works with hdmi group=2, menu is OK but now I have alternate black screen 🤦

@@davidevolpeliddi9645 Some systems like the Amiga have an individually set mode. When you start the game, press the A or B button repeatedly and it jumps to a blue menu where you can cancel or reconfigure the individual settings.

@@tomaskonvicka4135 Thanks. How do I set the Vram limit? I have raspberry 3b+. Thanks for the support 🙏

Yes, of course it's possible. Just copy the WHDload lha files to roms/amiga1200. You just won't have the reflection boxes to do it. I'll get them done in time. In case of missing boxes, it's a good idea to switch to the AlekfullNX theme, tile mode.

@@tomaskonvicka4135 thanks alot

Check it out, but it's an unsigned program that Windows doesn't usually support.

Thanks buddy:) I hope it works to your satisfaction:)🕹💾👾

Díky, hlavně ať to funguje ke vší radosti:)

Thank you for your kind words and for your comment. I'll fix it and let you know:) You can also try it overnight when it's least busy.

​@@tomaskonvicka4135 Thank you very much, I would be grateful. And thanks for the immediate reply, have a nice day ;)

@@DarkWizard74 Hey buddy, I haven't forgotten about you, here's the segmented file finally: It's not a chopped up big zip, but it's split by platform, the main Amiga file works independently, the rest you can optionally add to the roms folder. www.dropbox.com/t/T3MkIU3H6lB2VdQl

@@tomaskonvicka4135 Thank you so much, I saw that you split the image that I couldn't download until the end. You're great ;) Now I'll try it, thanks again.

Thank you very much:) I think you've put it well.

Not yet, but it should be easy to copy the content and all the configuration files to your existing Batocera.. 99.9% of the games are for PUAE and PUAE2021.

@@tomaskonvicka4135 I going to wait for the batocera version, thanks!

I always like to read your positive words:) I would be very pleased if you made a video about it:) I hope it will download well, it's a big file. If there are any flaws, please let me know.) Thank you and I look forward to your YT review:)

Hey. Hey. I have no experience with this unfortunately, but I found this video that might help:ruclips.net/video/1eOFcYNfQMo/видео.html The guy in the video enters mode 3 for rotation, you have to enter mode 2. Also these instructions should help: Step 1 - Edit Config.txt Start by editing the config.txt file ether via the sd or with: sudo nano /boot/config.txt Add one of the following lines to the bottom of the file : display_rotate=0 display_rotate=1 display_rotate=2 display_rotate=3 0 is the normal configuration. 1 is 90 degrees. 2 is 180 degress. 3 is 270 degrees.

Thank you so much for your kind words. Actually there is only a selection of 50 CD32 games, as the rest of the games are basically floppy versions with MOD music. If you still want them in there, you can add them from another of my game packs for The A500 Mini. En🕹

@@tomaskonvicka4135 I was just happy to see diggers with the music back on and Microcosm with its fmv intro 👍 lovely image

Hey. Hey. Yes, I let it expire because I made a newer version: ruclips.net/video/OxxFDE1J4eM/видео.html The download links are below this video.

@@tomaskonvicka4135 thankyou!!!!!

Thank you so much for your kind words full of nostalgia:) That's why I'm still doing it. I wish there were more people like you:) Enjoy it as much as you can and don't forget that all the top categories - Top100, Top30, Favourites, you can define yourself. What are your top 10 picks?

@@tomaskonvicka4135 I’m very thankful, using your Tomato 2.0 build on my Pi 3 and the 1.1 on my Pi 4 is like browsing memories of the past. I rediscovered some games I had, but forgot their existence. You gave the hole thing a unique look, even better than the A500 Mini front end. The golden age of Commodore gaming is something special. Over 3.000 Games and everyone had some. We traded our games during the weekdays in school or with family members on the weekend. There was no internet. We only had a telephone at home. Today something unbelievable for younger gamers. 'Gaming together' was our key to success. You can’t compare the late 80th and early 90th with the present. We were three or four people, sitting in front of one computer - and yea, it was an awesome experience. Naming 10 Games that made it to the top is hard and a bit unfair, because every game had its playtime. I didn’t mentioned «Lotus 2» for example, but it’s one of the games that ran for days. «Zool 2» Finally the Amiga gets a great Jump'n Run game. «Uridium 2» Selling the holy C64 for buying an AMIGA 500 hurts. With this game the good old feeling came back home …in, wow, what a great graphics update. «Super Cars 2» Hated at the beginning, loved at the end. Great gameplay for two players …until Micro Machines appeared. «Speedball 2» I scream ice cream. Two player computer heroin, makes you addicted in minutes. «Lucas-Games» It doesn’t matter what game. We played them all during colder month. 11 Disks for Indiana Jones 4 …and none of us has become a famous DJ. «Wings of Fury» minimal in it’s presentation, maximum fun at all. «Turrican 2» Eat. Play. Sleep. Repeat. After a game is before a game. I played it for listening to its great music. «Sensible Soccer» The world of 96/97 was dedicated to computer soccer. «Pinball Dreams» Why? Because everyone loved it. No joystick required. No rules to explain. Even my Aunt played with us for hours. «Lemmings» In real-time you’re loosing a lot of lifetime. OMG, I remember writing down a lot of codes instead of saving to disk. I’m sure I’ll find more lost memories while playing with the Tomato Pi.

Switch the hdmi to the other one.

@@tomaskonvicka4135 switch which hdmi? Wait...I'm confused 🤔

@@superduperman7202 I was just wondering what the second HDMI output shows. Forget it. Does it say something about an error message? Have you had any other images on that card before you wrote a new one without reformatting? Also, maybe you have a newer motherboard and need the boot files, which is also in there somewhere under the link.

@@tomaskonvicka4135 I get the retropie command screen. I did get instructed to change the password, which i did. I get background music too for some reason. It doesn't go any further than that. I left it for 30 minutes. I can use commands to get into setup menus but I cannot see any issues. I have used this card before. I wiped it with SD formatter and write the image with win32diskimager. I have the 1st version of the rpi4 so I'm not too sure what ram etc it has.

@@superduperman7202 Maybe try a different SD card. When I've tried other people's images, it's been a problem at times.

Thanks a lot for the kind words:) Use some ISO image creator to grab it from the CD. Then follow this instruction of mine. ruclips.net/video/_bdNQMmvGu4/видео.html If anything is not clear, let me know. Enjoy:)

Got it working! The soundtrack is Amiga MODs not CD audio so I used the WHDLoad version provided on the CD and just archived it to a LHA and it worked! I'll try your guide on another game. Thanks!

Hey, buddy.) Thanks for the kind words: This link works. www.dropbox.com/t/sYyLJur2Mp3LICHW

It should work but it never did for me, I probably didn't have the right cable, here's the instructions I found: ruclips.net/video/9m8ScViTZi0/видео.html

@@tomaskonvicka4135 Gotcha cool thanks for this man. Let me know if you ever do an x86 build of this image, would totally help test it for you!

@@samuelbanya If you mean the Retrobat version, I'm just finishing it up. I also wanted to do a Batocera version, but this seems more practical.

Thank you very much my friend:) Enjoy.🕹

Try changing the hdmi video output. Even if one is showing something, the system may work on the other.

It's working on rpi 4 fine.

​@@tomaskonvicka4135thanks for the quick reply! It's so weird on my pi400. I tried to input a save file name in cannon fodder and the keyboard is not working properly so I could not save the game.

@@marclivingstone I figured it out:) Press ScrollLock on your keyboard. This allows you to switch between Game Focus mode and normal mode. This mode allows you to use a keyboard fully dedicated to Amiga, C64, etc. However, this mode will disable Hot Key functions on the joypad such as Enter Menu, Save States and Exit Game. This mode can also be enabled as default in the Retroarch menu, but I don't think it's necessary.

@@tomaskonvicka4135 Would you believe it! The pi400 does not have a scroll lock! Is there a way to change the toggle

@@tomaskonvicka4135 Found it!: Settings > Input > Hotkeys > Game Focus Toggle. I then changed it to Right Alt. Thanks for all of your help, I appreciate it. Now to play some awesome Amiga games 🙂

Thanks a lot for the compliments:) The bilinear filter is a natural feature of the old Amiberry that cannot be turned off. But it's also the only emulator that works well on the slow Raspberry PI 3. Newer versions of Amiberry allow you to turn it off, but it doesn't work there with speedhack, which makes it run smoothly. People turn on all sorts of CRT simulations, and this is actually the most natural. Even on the old monitors, it didn't look that sharp. When you go to the newer Raspberry PI4, I've done a similar image there, it's already sharp and there are different settings.

Hey. Hey. There is no official version of Hired Guns for CD32. But recently a fan project appeared, but I don't know if it is still in development, here is a link to the beta version: archive.org/details/hired-guns-cd-32-dev-files

Thank you so much for the kind words, I'm glad you like it. The mouse is assigned to analog sticks and real mouse. If you want to control the mouse, you have to build a track ball into your arcade cabinet. Or the way to go is to enter the Retroarch settings and set the digital arrows to mouse for certain games.

@@tomaskonvicka4135 Thanks for replying! I do have two PS2 style controllers also connected, and they have the two analog thumbsticks. However these thumbsticks don't move the mouse cursor in-game either. But they are working because they behave the same as the d-pad when navigating the interface, selecting games etc.). Do you have any advice for me to get the thumb sticks to work as mouse in-game? I appreciate you taking the time to reply!

The system recognises the two PS2 controllers as 'Microsoft Xbox 360 controller'

@@robmatthews5924 Did you configure your joypad, or did you just plug it in? I originally made this for a PS4 controller, but if I do the input configuration, even the cheapest joypad with sticks works.

@@tomaskonvicka4135 I configured one of them, and didn't configure the second. They both behave the same. I've got an idea though. I'll reflash your image to my SD card so it's fresh. Then I'll start up the Pi without the joysticks connected, just the wireless controllers. Let's see what happens! Thanks for your help so far 👍

I've renewed the link: www.dropbox.com/t/YAqJ7RGjEw3Xm5Kh

That's very strange. Is the file correctly unzipped from all files?

Thanks a lot for the kind words:) It's just a pity that the SD cards bothered you. Version 1.0 is harder to fit on 64GB sd cards, but version 1.1 will fit on all 64GB cards.