Видео

Ciao, si effettivamente anche se rumorose e più complicate delle elettriche, proprio per questo motivo sono spettacolari.

@@ViCatRC il sound è fantastico....e le prestazioni molto diverse dall elettrico

@@danielemulazzi1615 Adesso causa lavoro ho un pò mollato ma spero di riprendere questa estate. Ho molti progetti da realizzare. Ad ogni modo le rc a combustione sono uno spasso. Ne ho una a due marce ma il motore è più piccolo, per cui non ha il sound robusto come nel video. Ma la cambiata è una figata.

cults3d.com/en/design-collections/ViCatRC/wltoys-124017-124019-144010

@@ViCatRC I assume they're better printed in PETG, aren't they?

@eddiespectral I normally print in PLA but the front spoiler is even possible to print in tpu.

Thanks for watching. I guess with foam tires it would be more stable but top speed would be lower due to the smaller diameter of tires.

No mate, with stock 2s lipo and 18t pinions it works good and still have some torque. Honestly that 60A esc is not that reliable but I didn't experience problems during my test. On the offroad test I just squeezed all out of the stock 2s lipo.

This was the old v1 3400 kv motor 27t pinion

Thanks mate. I am not so keen about metal parts. If you want to go for it it's just for a cosmetic matter, cause in speed runs the lighter you are the better it is. Besides plastic absorbes much better shocks. About The FlySky NB4, it's a great radio, I think one of the most complete and functional radios and it's not even expensive considering all the cool features it embeds. Unfortunately I bought it some time ago in a shop and I don't have links, but you can find everywhere online. Talking about the suspensions, what i did is to double the stock springs on the rear to make the shocks rigid and avoiding squats. In speed runs it's pretty important the car does not squat too much otherwise it could flip in the air on high speed. For what concerns the 3d printed kit I designed you can find at this link : cults3d.com/en/design-collections/ViCatRC/wltoys-124017-124019-144010 It includes front and rear adjustable wings and the protective sidebands. Consider that I don't sell the finite printed plastic item cause it would cost pretty much. Instead you can download the stl file and print it by yourself or give the files to a friend to print it for you in a cheap way. Best regards.

@@ViCatRC double dwn ? Like tighten it twice the amount on rear?

Yes, it's necessary to stiffen the rear that is pretty sloppy and lower the front to give a rake effect so the rear is higher than the front.

What type is the motor mount, i got rocket rc 540 v3 and the stock one doesnt fit...did you modify it?

Thanks mate.

Thanks. That's not a big problem mate.

I'm new to the 124019. Please show me your fast run.

@@linzitazim I am rebuilding a 124019 an just as soon as I get it set up I’ll post one just for you

Thank you very much mate.

Hello, you just need to heat it with fire, such as a gas lighter. The loctite is pretty much and hard, so you need to heat a lot and turn the screw driver both direction to loosen the screw until it gets unstuck.

Thanks mate and sorry for the delay. With stock 4300kv motor you could experience some cogging even if I didn't.

I bought a 5900kv motor for 18 bucks . I hit 77 mph now

yes mate!

​@@ViCatRCESC of 60a in 2s with 5900kv at 85 km/h?

Plastic.

@@ViCatRC Thank you

I used 50c and it was fine.

Hello mate. I guess so. Consider in the test i used the stock 2s 25c lipo and than a 3s 50c. The esc is a bit weak, but working right in spec with 2s lipo should be fine.

Yes it's stock gearing, stock motor.

Hello mate, you can find the rear wing at these links: cults3d.com/en/3d-model/various/arrma-vendetta-rear-wing cults3d.com/en/3d-model/various/arrma-vendetta-tuning-kit-bundle