Видео

Did you use a 24 volt strip?

What voltage needs the Led strip to be?

Hi, have you noticed any degradation of the provided gd900 paste? I was doing some troubleshooting of this clone hotend, and I noticed that the paste was almost dry just 15 days after the installation. I looked at the specs of the gd900, and it only has a maximum temperature of 200C

I printed it and it came out kinda off. The hotend tube connection to the extruder doesn't line up. Is there a file I can mix to make adjustments?

Yo quería ver la calidad del ticket y lo censura 😢

Crack, te pregunte en otro video por el mod de la creality 3 v2 neo... no sabia que hablabas castellano jajaja valio la pena el mod de extrusion directa? Acorta tiempo o solo calidad? muchas gracias!! (excelentes tus videos, tremenda calidad, me suscribo!)

I could really need some help here, i did this for my s1+ but now its saying its a s1 pro and the bed size is all wrong and i have no idea how to fix it

Can I ask what brand of sensor you are using? Thanks.

I have 2 ender 3v2. One had 1.0.4 and the other had 1.0.7. I installed the software you mentioned, the pro version, on the printer that had 1.0.4. I have more than 100 models prepared before and I use them regularly. Now, although I made the retraction settings on my models myself, I am experiencing serious problems because of firmware retraction. I made a voron m4 direct drive for my printer. In its previous state, I could fix the e-step value of this software to 560. Now, when I try to download the old version, the e-step value remains fixed at 186 and does not go above 560. Do you have any information on how I can disable firmware retraction? I cannot find the old firmware that goes up to 560 estep value.

21:06 also you can unscrew that black nut in which the ptfe goes a little, push in tubing and screw it back to make a tight fit

Very cool to see! If you haven't tried MK6 yet, I'd love to give it to you for free to try out!

If you have the enclosure kit and you print up your own side panels etc. You can always wire in and mount an on/off switch to the parts you print up. Some switches (eBay) even light up.

Tysm I couldn’t tell you more how much this saved my life. Btw if you need the file it’s in the description of this short

Creality Herman k1 Munster Max

You have to home all axis on fluidd before you can calibrate the bed mesh.

hello , How did you overclock?

This worked for my HyperX cloud wireless as well... Thanks <3

i like this professtional version, but i can't find the version to support Ender 3 Neo Max , please tell me how can i download it

I made almost the same light today, but used 3 led strips on each side, connected one by one. Also I added a button to turn the light on and off, and powered all the light directly from the supply unit. I'm not sure how much power can the motherboard supply via that connector.

For 2024 is good ?

Could just depin it

Same here. No need to change rails or anything else. Another tip, it look even more perfect with presure advance setting in CP

СHC PRO from triangle labs more powerful! 2x time speed heating! Side fan only for PLA bat this printer more powerful to print simple plastics. I use this fan for heating camera to print ABS and complex composit plastics! If you hit camera to 60-65 C power printed items rise about 40%! Think 40%!!!! And you dasn't change pulley!!!!! Ho ho its MAST HAVE upgrade!!!!

hotend stl file ?

On all of my machines, none are inverted. Red is always positive.

Nothing here is worth the time it took to watch this. Certainly nothing worth doing to your printer.

is it ryzen 7 or 5 ?

Hi. Is it original LCD? What mods did you make? What firmware you use?

Interesting hack, but in typical fashion, there is no mention of some pitfalls of doing this without doing the math. You didn't say what voltage the board puts out, nor did you state the current capacity of the board. Cheap LEDs can work perfectly fine, but when you cut them down or apply higher than optimal voltage to them, they run hot, which means high acreage. This high amperage can damage your new printers main board. Be careful!

What acceleration do u used?

Is there any downside to installing a custom firmware?

I CANT BELIEVE THIS FKNG WORK, ty dude

I have a K1 Max and I'm having issues printing a good benchy with 95a TPU. It is all good, until the chimney. Then it gets bad and looks all melted and squiggly. I can figure it out. I challenge you to try it on yours. Let us know how it goes.

What if you had the diy inclosure what then?

Bro, are you still using it?

WHEN YOU PUT A BRAND NEW FILAMENT ROLL OF 1KG IT FLEXES THE POLY SHEET THAT HOLDS THE BLOWER FAN INSIDE AND WHEN IT FLEXES THE FAN POINTS AWAY FROM THE BED AT A 20* TO 30* DEGREE ANGLE WICH IS VERY HORRIBLE AND THE FAN IS USELESS BECAUSE THAT AIR IS DOING NOTHING SO I QUICKLY REMOVED THAT HORRIBLE SPOOL HOLDER WHEN I DISCOVERED THIS FAILED SPOOL HOLDER SO I ADVISE ALL OF YOU THAT NEED A SPOOL HOLDER TO GO WITH A TABLE TOP OR ONE THAT MOUNTS DIRECTLY TO THE PRINTERS FRAME TRUST ME YOU WILL THANK ME LATER. DO NOT USE THE ONE IN THE VIDEO I REAPEAT DO NOT USE THAT FAILED SPOOL HOLDER

You need to print out some 270° door hinges. I like the look of those covered side panels.

Can I use this for my 3S Plus

Ok question. Doing this mod then doing all metal hot end am I able to do pa6 cf? Or is the remaining Bowden tube still an issue for melting?

My ender 3 v2 neo is just stuck on the creality screen when trying to update to profesional firmware but when i try creality firmware it updates

Have you checked out K1 Max side Run Out sensor Plate on printables by smaug?

Hello, at one point you're not sure about the 24v, can you confirm that it's really that, it's important to know before buying the LED ribbon, thank you. And so that the light can be switched on and off as required, it's possible to put a switch near the front panel to turn it on only when we need it, while waiting for the firmware to take into account a LED bar when it's updated.

Can You share the config?

i been having some trobule with the latest firmware, i can´t calibrate the bed. Can you do a review?

I was searching for a solution for my direct drive extruder. Thanks for this!

Merhaba söylediginiz gibi site üzerinden ender 3 v2 neo yazıcım için bltuch olan yazılımı indirdim. Ama sd kart takınca crealty yazısında kalıyor yükleme yapmıyor. Anakartım 4.2.2. Crealty sitesi üzerinden orjinal son sürümü yükledim kurdu başarılı. Ama sizin gthup sitesinden yüklediğimi kuramıyorum isim değiştirdim yine olmadı. Lütfen yardımcı olurmusun bir haftadır bununla uğraşıyorum🙏🏻

Wow I did a different one but I could barely clear 5.5

Hi! Please help! I recently upgraded my Ender 5PLUS with a 4.2.7 32Bit motherboard and a colour LCD, of course i uploaded the best firmware ever, the Mriscoc 😅 My problem is, the firmware is locked at 230mm printing size, and i want to increase it to 370mm on what ender 5plus have. I tried to do it from slicer, but the printer firmware overrides the GCode and stops at 230mm. How can i increase the printing volume ?

Are there any updates on this firmware, as it works great

what if i donwload it and the picture is just pages?