Видео

Great review! Really considering this model now

Looks pretty cool, but I hope Veto eventually make some kind of Toughbuilt clip adapter option. It's just more streamlined and easy to use.

HI Guys. I bought one like this cutter .. and if you want my feelings for this. I am really very happy to use it. I recommend to all who use tapes. Best of luck

Klein drawers seems to have more reinforcement. Just bought into the pack out system a lot of versatility, however did not purchase the drawers , I’m going to wait hoping Milwaukee designs a reinforced drawer system. It’s a lot of money spent on something that seems a considerable amount of pack-out users complain about.. until then Ridgid especially for the price seems more acceptable drawer system to live with. Especially Home Depot having a big Ridgid Modular sale. So a combination of Packout boxes and Ridgid drawers seems like a good compromise.

I have a snowjoe which I like. Only complaint I have is I can only throw the snow forward so I have to start at each end over the sidewalk and work towards the middle. This seems to have the same issue

Does the 90 degree attachment accept a bit on its own is do you need to put another attachment on it?

Great comparison, I actually have both, Gedore also makes very similar and also blue tools. From the start I can tell you I like the knipex ones more, I have some older versions slightly different from the new ones and also heavier. Weight is not a real problem here. Actually this lever action button is not the best when you work outdoor and some debris can go under that lever on the hazet. If that pivot pin is not fully seated you can do some damage to the teeths. The knipex is easier to clean,and that lever doesn't make much difference for me. Also the heat treatment is better on the knipex cobra, more durable teeths on the gripping jaws. Don't get me wrong, hazet makes great tools, sockets, torque wrenches, and special tools for automotive industry. But I mostly choose knipex when it comes to pliers.

Its not even 12v i believe its 10.5v yet so powerful for the tasks it meant to be used

I just returned a CXS 12 to get this one. The CXS 12 screams like a Banshee at full power! Plus I prefer the mechanical clutch. I found the electronic clutch on the CXS 12 to be unreliable. Also, I know this does not have an offset head, but I think the right-angle head is small enough to fulfill that need in many situations.

I own rc cars and they get dusty after running them would this work for blowing the dust off when finished?

TP6B was my first veto purchase. I really liked the idea of this bag, however there were some issues with it. It tends to tip rather easily, and because there is no flap, the tools just fall out. I work out of a vehicle and we're always driving around back and forth, so the bag is gonna move around no matter what. I ended up going back to a regular ol' tool bag that I can zip up. I gave away my TP6B to my brother in law and he loves it, he works inside so these issues don't bother him. Veto has since come out with the TP-LD which is more-or-less this bag but with a flap cover and a wider base. I'm seriously considering it.

This 1 gallon good enough to inflate car tires?

Hey man. How was the bag. Is it still in use today, if so would love another video on it and its setup. 🙌

Very nice screwdrivers

Gratis tool!!

Lol mine and my coworkers were dropped oil when we got them

I think they probably blow

I am confused which to get, between this and the 9308EVA. Snap-on sells the 9308 only. Wonder why.

for a home DIY user will it not act as a replacement for ratchet, screwdriver?

Team blue here. I love them so much I got 2 combos so that makes a total of 2 drill drivers and 2 impact drivers. Powerful, light, nice to hold and last for days. They also always have redemption sales I ended up having 8 batteries altogether (4 came with the kits and 4 via redemption). Best part is in Australia we get 6 years warranty on batteries too!

The Bentleys of the screwdrivers…awesome

A Chinese company bought out SK and moved operations to China. Who knows what the quality is.

They are hard to find , but a class act !

How is the VDE handle (I assume you have that as well) + slim blade combo compared to the Wera Kraftform Kompakt ? Does it have any play ? The Wera has some and I don’t like that. But a Wera set is less than half of the price of PB Swiss here in Europe (40€ Wera with 6 slim blades vs 100€ PB with 5 slim blades). You could do a video on detailing/testing the quality of the PB Swiss VDE kit as there is absolutely NO such information on YT (other than unboxing and just briefly presenting the tools). Tightening the screw in a circuit breaker and checking if there is any play in the handle when you torque down the screw is a good test for lateral stability. Pressing with a flathead blade (like in those push-in wire connectors) would check if there is any front-to-back wiggle.

Good review! I'm starting to get into tools, I have many knipex tools in my Amazon cart. I'm looking forward to buying them, I'll also get some of their pliers, cobras and so on. Have a look at their cutter, it's amazing! Have a great day!

I always wanted one but because I don't use it everyday so i picked up a makita clone lol. and after rewinding the stator I feel quite satisfied except the trigger switch ,, it is not a linear potentiometer, it is just stepped of 7 reistors

to be honest Festool not a power house on there Drills or impacts but they are not marketed to the construction world nor would I recommend them for that they are for the Cabinet maker and fine wood workers and who in there right mind would spend that kind of money to use it in the rain out doors on a job site where it will get dropped or fall and see abuse Fest tools great for specialty tools and Craftspersons that use there tools to make money and a living not for DIY or Construction

A must have tool if you work on Japanese motorcycles.

never tried, would love to, but having 3 sets already from European brands (yes, i know), it won't probably be for soon. Anyhow, looks nice and from what I heared, you can't go wrong with Vessel. Nice presentation

Vessel makes very good screwdrivers some of the best

I Like the way you do the bags/carry on levels :)

PB is for sure a class act !

lovely informative video! great job

I guess they are a cult! Lol

Nice review, thanks for the time and effort you put into it - always instructive to see follow up reviews a year or two down the line. These machines aren't cheap, we want them to last! 🙂The only extractors that exceed the Festool range are those made by Starmix - Metabo, Mafell and 3M have the iPulse in a comparable size to the CT 36 E AC. Out of interest do you ever use the AC function with a closed bag installed? And how is this holding up after another year of use?

I love the look of PB Swiss tools i need to add some to my list

Nice I love PB Swiss my Favorite Screwdriver Brand

How the TPC Holding up now that you had more time to use it

FEQ-Plus. = what does this mean? (Feq i heard was the Motor inside) RO = Rotex (the belt driven motion) 90 = ? DX = Delta extension (the triangular edge sander)

Yes you can use bits and sockets but you lose the ability to lock either in place on the head, it's all magnetic which I'm not a huge fan of.

I think the reason for the magnets, is because there's physically not enough room in the thickness of the drive between the 1/4 and 3/8 drive to make them locking.

well presented good content, music is kinda annoying honestly

The Hazets look like they've got a bit more steel in them. I'm not sure it's needed but you can see the quality is there.

WTF with people and all the effing music in videos??? Makes me sick, I’m serious!!!!!! Sick of it, lousy stinkin TikTok wannabes!!!!!!! Just make the review and get on with it, you dig? 😯 😆 😂

Really bad one, I had to go back to my 818. I'll get a 838 now I believe.

I was just looking at my collection of caulking guns. The convoy lite is actually my first or maybe second dripless gun I have tried and it is the reason why I went out and bought a bunch of other caulking guns that make a similar claim, but with a higher ratio this time. I have a bunch of Dripless brand and they work….only if the tube does not have any air bubbles. newborn has a few good ones too, but they also experience similar issues like the Dripless where it drips about 1 in. Then I came across the Ox drip free gun….P045910…and this thing works flawlessly. 12:1 ratio perfect for finish caulking, but expensive as hell. It costs at least 5 dollars more than the Tajima convoy super that has a similar ratio. The best part about this gun is the ability to turn drip on and off. Highly recommended.

I liked the longer format video I’d just lose the music in the future but I sure liked the detailed review.

Sounds to me like you want the regular zyklop. Only has a square drive head, but it has mechanical retention, and comes with a rapidaptor. Plus a larger selection of sockets. Im 90% sure the heads are interchangable too, so you could take the regular zyklop head and pair it with the pocket body for bit storage, then put a square drive extension and rapidaptor in the extention slot. It's a bit of a project, but if mechanical retention is your desk breaker then that would be the way to go.

! Made in Germany= Supports Genocide and Murdering/Deliberate starvation/ Sniper Killing of Babies Children, Women and innocent men in Palestine, ie GAZA and Westbank by Israel! NO THANKS ON GERMAN MADE TOOLS!!

If I didnt already have cobras, I would consider these. But it doesnt seem worth upgrading into for the price.