Видео

You should put a new ballast and driver circuit to actully start the lamps instead of frying them

You should run the burnt bulb on the preheat shop light it just might turn on

it seems like most of the model 3s, 5s, and 7s in the baltimore civil defense system were mounted like this

The only fluorescent fixtures I would ever do an LED conversion on. I've bought two of these of similar nature from a thrift store and they both did the exact same thing. JUNK!

Woohoo! 🎉😆🤠

Thank you I am so happy and grateful! 💖🥰

Deep fill is for the rinse cycle. So it doesn't do a spray rinse.

Joe, in telephonese, the term for the "microphone" is called the transmitter. The ear phone piece is called the receiver. Just thought you'd want to know. ha ha

do you by any chance know how to change the bulb and what kind of bulb it use for this?

I have this exact same model. It’s decent .. but falls out of balance quite easily !! When I attempted to wash 2 bed pillows it was an absolute nightmare with the machine constantly falling out of balance !!!!

i saw this on my vacation to delaware last month!

I have the same problem with my 6 bulb 49w t5 fixture that is preheat sadly I can replace the starter because the starter is in the fixture

Thank you?! Looking to buy a used one and this video helped a lot !!!!!

You should visit the Byerly Road Railroad Crossing north of Boring, MD. It has a unique bell-only signal with a crossbuck. No lights or gates, just a bell.

what about hi lo

Nice 😊

I am surprised it works still even after a nest of birds raided it

But the lid doesn't close all the way.

You my friend have rightfully earned a Dislike for the minor infraction of perpetuating bullshit😊

The know for push and turn must be pulled out if you want to open the projector after removing the 7 screws. Ok, how to you remove, or tighten the belts? My projector starts moving, but the stops. I believe the belt is too loose.

I'm thinking of getting the current GTW485 washer. I'm sure it's very similar.

Very cool!

Take the bagger off & use it like a regular push mower let it come out the side of it

The siren you showed in the video is a Federal "Type Mach. B", manufactured by a company called "Federal Sign Systems", or Federal Electric Company (now known as Federal Signal). It is a slightly older design than the M, the style you documented being made between 1917 and 1922. These have really tiny fans with tiny vanes and have a rather pathetic sound output, and they didn't make an insane amount of sales in their day. Or if they did, they all got swapped out pretty early, making it a fairly rare find nowadays. That one is missing the impeller though, rendering it completely inoperable.

This kid is funny 😆

cool!

😮😮😮😮

How can you keep your door open and the washer working???

Not getting it. Take part off drop it in the hole. Lowering the lid does that… what’s the dif?

I think the other siren is an ASC E-Class EC4

Thanks so much for sharing 😊 I have the same mower with the same problems whenever bagging. Does anyone have any other types of mower recommendations 🤔

Well Atleast the clothes likes that I probably will not complain about that but if I barely see water I will definitely

💪🏾Gracias por tu video!!!!!

14:02 not an unbalance really😤 why the fuck is no one answering me 3:54 dude thats the max

Did you remove the mulch plug?

anytime something is being mass produced, and especially now that production comes mostly from China and Mexico, every once in a while you're going to get one that's defective. that's just a fact of life. I've found that Craftsman customer service is very responsive to customer complaints. Have you called or emailed Craftsman customer service? You made a great video. You should send it to them.

just what i needed in my yt video thx

I don’t have this exact craftsman (M105) but you don’t have to use the bagger all of the time and you can also raise up the deck with the adjusters on the two right tires. I’m pretty sure you can either do the side shoot or the mulching mode

I got up close to this exact one a few days ago

I got this up close and the other one by the FD when we went to OCMD just a few days ago

The shutdown one looks like sentry 20v2t

At 6:44 did you hit deep fill or did it sense it was too low and add it on it's own? And at 14:13-14?

Had to learn hard way one use and won’t start

I have the troy bilt version of this mower. They're both made by MTD. However, one thing I've noticed before buying mine is anything lower than a Cub Cadet or Troy Bilt in the MTD lineup is made poorly. Also, the spewing of grass always happened with mine if the mower was close to stalling out. What solved the problem for me was changing to a better plug. Get a Denso IK16 Iridium Power spark plug. It has the correct heat range to replace the Champion RC12YC. Then carefully gap it to the briggs spec of 0.020" for the 140cc engine. It sounds crazy that a plug can make all the difference but it does. Fine wire plugs are easier to fire than a regular plug. And, there's a few other tweaks Denso made to their Iridium Power design. Anyway, my mower hasn't bogged down to die since. I couldn't believe it and this was with a dull blade.

What do you do if you broke the piece that locks the lid?? Can you somehow by pass the lid lock, if so can you send me a video.the model number is on the GE washer.is GTW220ACK7WW.thank you

Great catch! CSX I135!

Thank You for understanding how masses of transitioners have made the reputation of these He washers dubious. So many newer end-users mistakenly believe that all agitator washers are "meant to fill to the lid" with water. Nope, they are all manufactured in alignment with current DOE/EPA guidelines. So, if a top load washer is not labeled "commercial" á la Speed Queen, or SELECT GE, Maytag, and Whirlpool versions, then expect your washer to use far less water and need far more time with far better quality He detergent than before 2006.

All you have to do is hold the water level button to precise fill

I have the same washer it works perfectly. I Always make sure the clothes are even on all around to avoid that heavy shaking

Can you please give me a video of anybody of a how do I bypass a washer lid on a GE stackable