Видео

Wows about time we had another positive fix video / they’re great 🎉🎉🎉

Hello, where do you buy the gasket, do you have any tips?

Thank you! I followed your repair video and was able to fix my machine too.

Grazie stavo impazzendo e non capivo come mai si riempie sempre la vaschetta 😅 oggi ho smontato la macchina e ho sostituito gommini grazie ancora sei 🔝

Did they solve the issue on the v2 version of this boot dryer, so it will not fail like the v1’s?

Hello teacher, I have a problem with the espresso machine (capsule). The steam comes out densely before the water, and then the water comes out. What is the problem?

Can i ask what size are the screws on the back panel?

What type srew dive to you need to take out the srews in battery

This seems a critical O-ring. I replaced it on our Dinamica and it cured the problem. Thanks for the tip.

Can you share what the size of the surrounds are you bought, and where you bought them from, please?

I love you! Your the best! Struggle for a while but you have the solution. And it cost me nothing because I had a O ring. I'm so happy! Thank again!😅

Wow, this simple O-ring, makes the difference ! Thank you #PositiveFix you really did a great job.

You can review your multimeter

Could you share a link to the 'O' ring kit please?

Please stop saying, em em em, so annoying

After stripping the coffee maker, I found my o ring set had none of the right sizes. It looks like you need 1.5mm o rings in the following sizes (od.id): 7x4, 8x5, 21x18, 9.5x6.5, 14.5x11.5. However this is from measuring with calipers, not a spec sheet so may be wrong.

good video. Green attitude ! With 10mn more you can remove the complete infuser, and clean it deeply. This part is the same on an magnifica S. The most difficult in this repair is to find torx with center pin, and replug some pipe

Thank you so much. You saved me a minimum ~$300 service charge or even a new machine. $20 variety silicone O-Ring kit off Amazon worked just fine; I just eyeballed them for fit. Fantastic explanation - I would have never found that little screw cap thing that popped off if you hadn't mentioned what that was. Found the spring around 10 feet away on the floor.

It worked great!!!!!!!!! Thank you so much. That oring in my machine was not broken but it had weared out. A new one did the job

Denn antrieb würde ich ein bisschen fetten mit Lagerfett

Hello. Thanks for video. I just bought thermic boot dryer uv version. Blue cokor. After five use it doesnt work. Now i try to understand what happened, when i open inside, one of white color porcelene looks crack in aluminoum part. Can i send you photo, and help to me please. Because i am in turkey and i cant find any services for this

Thank you so much. I have just successfully repaired my Therm-IC boot dryer after following your instructions. I ordered a pack of 5 thermal fuses for £10 on eBay, from Poland, plus some heat-shrink tubing. This was the second dryer to fail - I wish I had known about this fix for the first one!

Thanks for the video! it was of great help to disassemble the control, but now I think I broke it putting it all back together, maybe you can give me a hint? . After I finished assembling back the control and plugged it to the usb cable to charge the new battery, the control's power button started to blink five times, one of the vibration motors starts, and then it stops, to start again a couple of seconds later. I disassembled again the control and disconnected the new battery, but the issue persists, so I probably did something wrong when putting it back together the first time, or worse, I broke it. Do you have any idea of what could be wrong? Thanks in advance!

Does anyone know definitively the size of the O ring that you need to replace? I have seen multiple videos, but not a specific size. I have heard 6x1 and 6x1, 5. Not exactly sure where to find it. Any help would be appreciated.

Thank You for help!

I've just done this, and while the machine now works (thanks very much!) I have 2 extra screws so I'm gonna have to go back in

Thank you for this. Everything I need to know. I was just looking at mine and was hoping a couple of AA’s would suffice. What a ball ache! Why couldn’t they just put a battery port on the rear panel for replacements? It looks like I won’t be playing games this New Year’s Eve and I’ll have to watch TV 🥱. I’ll order a battery and find myself half an hour of quiet time to sort it.

Finally fixed thank you, one o ring I missed after a week of changing the others 😊

I struggled for weeks trying to find a solution for this issue. Replaced various parts of the machine to no avail until I found this video. Replacing this tiny o-ring finally solved my problem. Thank you, you are a star!!

Thanks for making this video. I have the same machine and the same problem. Except I’ve noticed a blown resistor on the circuit board behind the 3 green buttons. Next to the glass fuse on the board. Problem I have is I dont know which resistor value it is as the colour bands have all burnt. Would you know by any chance? I can send you an email with photos if you could identify for me that would be amazing!!. Considering this age machine are now obsolete with no schematics or pictures of the circuit board to be found anywhere on the net. It’s hard work. I don’t mind compensating you for your time either. Many thanks in advance. 🤞🏻👍🏻

Uhmmmmmm

Hello..Nice video...please whats type baterry?18650 liion???Thanks..

How do you remove the main board with all those white ribbon power cable connectors and those other power connectors that have a wire wrapped around a pin I'm really struggling to repair one of these it's so frustrating, I'd like to get this board off and put the rest to the side while I fix the board

i re-built mine with rubber surrounds. also had to do the tweeters with silk dome motors. lovely speakers got mine from the same guy, great resource

Bonjour , j’aimerais si possible avoir la valeur du composent et sa valeur .Merci..jp

Bonjour j’aimerais savoir le nom du composent et sa valeur merci

Thanks. Managed to repair mine which I thought were bin fodder :-)

Hello, do you know what temperature is the thermal fuse for? I can’t recognise the value on thermal fuse in my device. Thanks!

Do you have a part number or link to the service kit?

Love this channel.- so informative and interesting as we experience the tear down and repair with you, making mistakes along the way - very real.

Great video! Appreciate the detail. This helped me out. Cheers

Hmmmm it appears he doesn’t reply to questions , what a shame , wish I new which Acronis true image was used..

1 minute boot for the ol' Verus Pro. That is superb time!

Great video! Love the step by step approach. Couldn't find another video specifically for the Gen 1 controller. As other comments have mentioned, all for the newer version which is a much simpler replacement. I ended up taping the buttons in place to avoid a severe psychotic break and immediate destruction of the controller. Don't know how you got those ribbon cables back in place with the buttons loose. You must have the hands of a surgeon and the patience of a saint! Thanks for the battery link. It still works and the company are great. Have now bought other batteries from them too!

Hi where do you purchase the replacement cells from please?

Awesome! Best video about this dryers <3

Hello friend congratulations for this informative video. A question? What is the length x width of the blackboard or playing area? And the wood that forms the railings or bands, what is the length x width? I hope you read my comment greetings from Honduras.

Great video … Did not even know this could be done - a top positive fix 👍 Looking forward to your next MacBook repair video …

Would have been nice to know what screw driver bit I needed when I recieve battery to replace. Now I have battery and cant unscrew lol

Did you ever make that second video updating to Windows 7? Thanks!